ART-L28 ID Lock On Octoplus Box [No Need Credits]
Note...
This method will remove the id lock, but the phone screen lock error will appear. If you want to fix the screen lock error, you can rewrite the firmware lower...
Read Mores.... Here
Welcome to Octoplus Huawei Software v.1.2.6
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM5 HUAWEI USB COM 1.0
Your balance: 150 credit(s)
Job ID: 0000000001A80945
2021-10-12 08:19:39 GMT -------------------------------------------------
Starting Reset Huawei ID
Selected phone model: STK-AL00
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: UCY6R20115021873
Detected Android Sooner Single ADB Interface port
Downloading additional resources...
Connecting to the credit server...
Username: cxYQKOIZma
Checking balance...
Your balance: 150 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: ART-L28
System: ARTH-L28 10.1.0.206(C636E2R2P1)
Resetting Huawei ID...
Formatting secure data...
Rebooting device...
Reset Huawei ID done.
Performed by 1.2.6 Software version.
Note...
This method will remove the id lock, but the phone screen lock error will appear. If you want to fix the screen lock error, you can rewrite the firmware lower...
Read Mores.... Here
Welcome to Octoplus Huawei Software v.1.2.6
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM5 HUAWEI USB COM 1.0
Your balance: 150 credit(s)
Job ID: 0000000001A80945
2021-10-12 08:19:39 GMT -------------------------------------------------
Starting Reset Huawei ID
Selected phone model: STK-AL00
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: UCY6R20115021873
Detected Android Sooner Single ADB Interface port
Downloading additional resources...
Connecting to the credit server...
Username: cxYQKOIZma
Checking balance...
Your balance: 150 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: ART-L28
System: ARTH-L28 10.1.0.206(C636E2R2P1)
Resetting Huawei ID...
Formatting secure data...
Rebooting device...
Reset Huawei ID done.
Performed by 1.2.6 Software version.
