UFi Bad CID detected, eMMC might be damaged !!!

UFi Box & Dongle

smrussel

Junior Member
Oct 14, 2020
3
0
Dhaka
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: Card (removable) - High density MMC
Manufacturer ID: 0x65 (Unknown)
Product name: M MOR (0x4d204d4f5212), rev: 0x90, serial number: 0x00000726
Manufacturing date: May 2021
CID: 65646F4D 204D4F52 12900000 0726581E
Bad CID detected, eMMC might be damaged !!!
CSD: D0FFFF32 0F5903FF FFFFFFE7 964000EA
EXT_CSD revision: 1.5 (MMC v4.41)
Failed to switch partition to 3, error code: 0
CMD8 error, cmd response: 0x900, card state: 4 (Card is in transfer state)
Error: failed to switch to RPMB partition.
Partition info:
Boot1: 2 MiB
Boot2: 2 MiB
RPMB: 128 KiB
User area: 7.22 GiB(7,752,122,368 bytes)
Partition configuration: 0x78
Boot acknowledge is sent during the boot operation
User area is enabled for boot
Partitioning support: 0x03
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00

Need help !!! Any solution
 

Yunus Yassin

Junior Member
Mar 30, 2022
1
0
Ethiopia
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: Card (removable) - High density MMC
Manufacturer ID: 0x65 (Unknown)
Product name: M MOR (0x4d204d4f5212), rev: 0x90, serial number: 0x00000726
Manufacturing date: May 2021
CID: 65646F4D 204D4F52 12900000 0726581E
Bad CID detected, eMMC might be damaged !!!
CSD: D0FFFF32 0F5903FF FFFFFFE7 964000EA
EXT_CSD revision: 1.5 (MMC v4.41)
Failed to switch partition to 3, error code: 0
CMD8 error, cmd response: 0x900, card state: 4 (Card is in transfer state)
Error: failed to switch to RPMB partition.
Partition info:
Boot1: 2 MiB
Boot2: 2 MiB
RPMB: 128 KiB
User area: 7.22 GiB(7,752,122,368 bytes)
Partition configuration: 0x78
Boot acknowledge is sent during the boot operation
User area is enabled for boot
Partitioning support: 0x03
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00

help me any solution ?
 
Top