Infinity boot ff firefly unlock frp KONKA6 se1

[MirzaAsimAli]

CM2 - MT2 v3.11b3 (beta)
Wait...
S/N: 003120381C v0169
Init log engine... Ok
Build directories tree... Ok
Dir firmware: H:\New folder (3)\
Dir backup: C:\Users\mirza asim\Downloads\Compressed\CM2MT2_311b3\backup\
Backup files: 1 dirs: 0
Load EMI database... 28 items
Check for updates [CM2MT2]...
You have latest version [3.11] installed

Telegram Channel: @InfinityBox
Telegram Chat: @InfinityBoxTalks
Sales: Infinity-Box - How to buy
Account: Infinity-Box - Account
Get config... Ok 3.64 Mb 4 min 13 sec
Get list of devices... Ok 64.28 Kb 2 sec
Loaded 4489 devices
ID.base v202512
Load device list... Ok 5 sec
init libusb... v1.2.6.0
DA selected: 0_base | base_v2316 | MTK_AllInOne_DA.1d5fdec4.bin
Several DA available. In case of boot issue try it one-by-one
Ready
This version is for TEST purposes only but not for everyday use!
Report bugs and issues to Infinity CM2 and [BEST] Official. Pay to Sellers ONLY but not here!

Start Connect v3.11b3 (beta)
Config: 0_base/base_v2316 Boot [DA] Factory v7
Port: BROM + PL; BROM force: Off
DA Key: custom; LSLA: On; Auto-EMI: On
Power device Off and connect cable now
BROM: Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #30 ] MediaTek USB Port (COM30) 0E8D:0003
Waiting for boot Ack...
Handshake... Ok
MT6739 HWs: 8A00 HWv: CA00 HWc: 0699 SWv: 0000 Evo: 0000 Zion [v5]; FireFly [FF] support: Yes
Sec: 0x0000 NoSec; BROM/BL ver 05/FE [BOOTROM]
MEID: 8EF661DFA672F38B2201797C8721933A
SOCID: E54B890E713B02ED95FB5EAAD4D371AB580E031A95AC28D4C8B692F3F05BB148
VNID: - generic
Get EMI by MEID... Absent
Load EMI...
Dump EMI v1...
configure libusb... Ok Load... Fail
[07fb00a6] 0_base\base_v2316\MTK_AllInOne_DA.1d5fdec4.bin
MT6739
Get bootcode... Ok
DA vendor: unknown
HW vendor: generic
Send DA1... Ok [Mod k1 1+|2~]
Jump to DA... Ok
Sync... Ok
DA sync... Ok
Set PowerKey... Ok
Set PowerSource... Ok
Set Checksum [none]... Ok
DA set params... EXT RAM not ready: BROM

Try known EMI #0...
PRELOADER: INFINITY PRELOADER_INFINITY_0 with 2 memory types slots: no
Push EMI... EXT RAM Ok
Boot DA2/1...
Boot DA2/2... warn=40
Fail [0xC0070004] DA HASH MISMATCH [Mod k1 1+|2+]

EMI: 0 => 1
Stop [Job 38246063] Connect v3.11b3 (beta) 12 sec Bye
Set [Custom DA] On and select Preloader/EMI file
Select another DA or model!
Use PRELOADER file #CM2MT2 boot BOOTROM with EMI/PRELOADER file - Infinity Box Dongle #CM2 [BEST] Support
EMI settings has been updated
Be patient, it takes several tries!
Connect device once again!
DA selected: 0_base | base_v2404 | MTK_AllInOne_DA.1121d1c5.bin
Several DA available. In case of boot issue try it one-by-one

Start Connect v3.11b3 (beta)
Config: 0_base/base_v2404 Boot [DA] Factory v7
Port: BROM + PL; BROM force: Off
DA Key: custom; LSLA: On; Auto-EMI: On
Power device Off and connect cable now
BROM: Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #30 ] MediaTek USB Port (COM30) 0E8D:0003
Waiting for boot Ack...
Handshake... Ok
MT6739 HWs: 8A00 HWv: CA00 HWc: 0699 SWv: 0000 Evo: 0000 Zion [v5]; FireFly [FF] support: Yes
Sec: 0x0000 NoSec; BROM/BL ver 05/FE [BOOTROM]
MEID: 8EF661DFA672F38B2201797C8721933A
SOCID: E54B890E713B02ED95FB5EAAD4D371AB580E031A95AC28D4C8B692F3F05BB148
VNID: - generic
Get EMI by MEID... Absent
Load EMI...
Dump EMI v1... Ok Load... Fail
[df6e006e] 0_base\base_v2404\MTK_AllInOne_DA.1121d1c5.bin
MT6739
Get bootcode... Ok
DA vendor: unknown
HW vendor: generic
Send DA1... Ok [Mod k1 1+|2~]
Jump to DA... Ok
Sync... Ok
DA sync... Ok
Set PowerKey... Ok
Set PowerSource... Ok
Set Checksum [none]... Ok
DA set params... EXT RAM not ready: BROM

Try known EMI #1...
PRELOADER: INFINITY PRELOADER_INFINITY_1 with 8 memory types slots: no
Push EMI... EXT RAM Ok
Boot DA2/1...
Boot DA2/2... warn=40
Fail [0xC0070004] DA HASH MISMATCH [Mod k1 1+|2+]

EMI: 1 => 2
Stop [Job 38246159] Connect v3.11b3 (beta) 8 sec Bye
Set [Custom DA] On and select Preloader/EMI file
Select another DA or model!
Use PRELOADER file #CM2MT2 boot BOOTROM with EMI/PRELOADER file - Infinity Box Dongle #CM2 [BEST] Support
EMI settings has been updated
Be patient, it takes several tries!
Connect device once again!
DA files missing
Select another SoC/Device or [Get boot files]
DA selected: 0_base | base_v2316 | MTK_AllInOne_DA.1d5fdec4.bin
Several DA available. In case of boot issue try it one-by-one

Start Connect v3.11b3 (beta)
Power device Off and connect cable now
To enter META mode device must be able to Power On well!
Waiting for device...
[ BOOTROM #30 ] MediaTek USB Port (COM30) 0E8D:0003
Waiting for boot Ack...
Handshake... Ok
MT6739 HWs: 8A00 HWv: CA00 HWc: 0699 SWv: 0000 Evo: 0000 Zion [v5]; FireFly [FF] support: Yes
Sec: 0x0000 NoSec; BROM/BL ver 05/FE [BOOTROM]
MEID: 8EF661DFA672F38B2201797C8721933A
SOCID: E54B890E713B02ED95FB5EAAD4D371AB580E031A95AC28D4C8B692F3F05BB148
VNID: - generic
Prepare target for META Ok
port reset [lost]... Ok 1 sec
port reset [arrive meta]... Ok 8 sec
META Ok
ping... Ok 2 sec
Switch protocol [AP]... Ok 235 us
Boot Ok 12 sec
SoC drivers: MediaTek USB VCOM (Android) v3.0.1512.0

Switch protocol [AP]... Ok 219 us
AP SoC: MT6739,S01
AP HW ver: S01
AP SW ver: KAAA27P_AUA_En_0.13.A23
Waiting for modem answer... Ok 218 us
MD SoC: MT6739
MD HW ver: Unknown
MD SW ver: TK_MD_BASIC_HW
MD SW time: 2000.00.00
MD DSP ver: 1.0
MD DSP patch: MOLY.LR12A.R2.MP.V46
Build: KONKA/SE1/SE1:8.1.0/O11019/1540282777:user/release-keys
Product Board: KONKA
Board Platform: mt6739
Product Brand: KONKA
Product Model: SE1
Product Device: SE1
Product Name: SE1
Display ID: KAAA27P_AUA_En_0.13.A23
Patch Level: O11019
Ver. CodeName: REL
Sec. Patch: 2018-09-05
Product Manfct: EastAeon
SW Version: 1540282777
Product Brand: getprop ro.product.brand
Product Brand: getprop ro.product.brand1
Product Brand: getprop ro.product.system.brand
Product Brand: getprop ro.product.vendor.brand
Product Brand: getprop ro.product.system_ext.brand
Product Model: getprop ro.product.model
Product Model: getprop ro.product.model1
Product Model: getprop ro.product.model2
Product Model: getprop ro.product.system.model
Product Model: getprop ro.product.vendor.model
Product Device: getprop ro.product.device
Product Name: getprop ro.product.name
Product Name: getprop ro.product.system.name
Product Name: getprop ro.product.vendor.name
Display ID: getprop ro.build.display.id
Patch Level: getprop ro.build.id
Ver. CodeName: getprop ro.build.version.codename
Sec. Patch: getprop ro.build.version.security_patch
Market Name: getprop ro.product.system.marketname
Product Manfct: getprop ro.product.manufacturer
SW Version: getprop ro.build.version.incremental
SW OTA Version: getprop ro.build.version.ota
ID: getprop-ro.product.brand1-eastaeon-se1-getprop-ro.product.model1-getprop-ro.prod
Strategy [none/generic]
Firmware ID: MT6739_getprop_ro.product.manufacturer_getprop_ro.product.model2_OSv8.1.0_getprop_ro.build.display.id_getprop_ro.build.id_getprop_ro.product.brand1_getprop_ro.product.vendor.brand_getprop_ro.product.system.brand
Android ver: 8.1.0
userdata: [ext4] unknown cache: [ext4]
Load nvram...
IMEI1: 867433040157054
IMEI2: 867433040157062
Stop [Job 38246211] Connect v3.11b3 (beta) 24 sec

Start Reboot v3.11b3 (beta)
reboot...
Stop [Job 38246211] Reboot v3.11b3 (beta) 172 us Bye

Start Connect v3.11b3 (beta)
Power device Off and connect cable now
To enter META mode device must be able to Power On well!
Waiting for device...
Break
SoC drivers: MediaTek USB VCOM (Android) v3.0.1512.0
User break Connect v3.11b3 (beta) 4 sec Bye
DA selected: 0_base | base_v2316 | MTK_AllInOne_DA.1d5fdec4.bin
Several DA available. In case of boot issue try it one-by-one
DA selected: 0_base | base_v2404 | MTK_AllInOne_DA.1121d1c5.bin
Several DA available. In case of boot issue try it one-by-one

Start Connect v3.11b3 (beta)
Config: 0_base/base_v2404 Boot [DA] Factory v7
Port: BROM + PL; BROM force: Off
DA Key: custom; LSLA: On; Auto-EMI: On
Power device Off and connect cable now
BROM: Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #30 ] MediaTek USB Port (COM30) 0E8D:0003
Waiting for boot Ack...
Handshake... Ok
MT6739 HWs: 8A00 HWv: CA00 HWc: 0699 SWv: 0000 Evo: 0000 Zion [v5]; FireFly [FF] support: Yes
Sec: 0x0000 NoSec; BROM/BL ver 05/FE [BOOTROM]
MEID: 8EF661DFA672F38B2201797C8721933A
SOCID: E54B890E713B02ED95FB5EAAD4D371AB580E031A95AC28D4C8B692F3F05BB148
VNID: - generic
Get EMI by MEID... Absent
Load EMI...
Dump EMI v1... Ok Load... Fail
[df6e006e] 0_base\base_v2404\MTK_AllInOne_DA.1121d1c5.bin
MT6739
Get bootcode... Ok
DA vendor: unknown
HW vendor: generic
Send DA1... Ok [Mod k1 1+|2~]
Jump to DA... Ok
Sync... Ok
DA sync... Ok
Set PowerKey... Ok
Set PowerSource... Ok
Set Checksum [none]... Ok
DA set params... EXT RAM not ready: BROM

Try known EMI #2...
PRELOADER: INFINITY PRELOADER_INFINITY_2 with 5 memory types slots: no
Push EMI... EXT RAM Ok
Boot DA2/1...
Boot DA2/2... Ok [Mod k1 1+|2+; Allow errors: No]
DA sync... Ok
HRID: 202CF24BABFC012176119896094AFA0C DA Auth Ok
Get hardware info...
SRAM: 0x00020000 128.00 Kb
DRAM: 0x80000000 2.00 Gb

EMMC CID: F40122426977696E201100000947A55D crc Ok
Vendor: Biwin OEM: 0x0122 ID: 426977696E20 [426977696E20] PRV: 0x11 Serial: 2375 0x00000947
MM/YY: 10/2018
BOOT1/2: 0x00400000 4.00 Mb | 00400000 4.00 Mb
RPMB: 0x00400000 4.00 Mb
USER: 0x39A000000 14.41 Gb

MT6739 HWs: 8A00 HWv: CA00 HWc: 0699 SWv: 0000 Evo: 0000 Zion [v5]; FireFly [FF] support: Yes
MEID: 8EF661DFA672F38B2201797C8721933A
SOCID: E54B890E713B02ED95FB5EAAD4D371AB580E031A95AC28D4C8B692F3F05BB148
HRID: 202CF24BABFC012176119896094AFA0C
RNID: 09DED4B03C3B312FC2C269A8252B629A
VNID: - generic

SoC drivers: MediaTek USB VCOM (Android) v3.0.1512.0
Stop [Job 38246274] Connect v3.11b3 (beta) 16 sec Bye
Set [Custom DA] On and select Preloader/EMI file
Use PRELOADER file #CM2MT2 boot BOOTROM with EMI/PRELOADER file - Infinity Box Dongle #CM2 [BEST] Support
EMI settings has been stored
Be patient, it takes one more try!
Connect device once again!
SoC supported: MT6735;MT8735/MT6737;MT6735/MT6753/MT3967/MT6763/MT6739;MT6731;MT8765/MT6768;MT6769/MT6761;MT6762;MT3369;MT8766;MT8166;AC8257;AC8258;AC8259/MT6765;MT8768/MT6771;MT8385;MT8183;MT8666/MT6575;MT6577;MT8317/MT6580/MT6752/MT8127;MT3367;AC8227;AC8238;AC8238

Start Connect v3.11b3 (beta) Boot [FF] FireFly v7
Port: BROM + PL; BROM force: Off;LSLA: On
Power device Off and connect cable now
BROM: Volume Up/Down or Test-Point
Waiting for device...
[ PRELOADER #72 ] MediaTek DA USB VCOM (Android) (COM72) 0E8D:2001
Waiting for boot Ack...
Handshake...
PORT Tx 0x1F A device attached to the system is not functioning
SoC drivers: MediaTek DA USB VCOM (Android) v3.0.1512.0
Stop [Job 38246380] Connect v3.11b3 (beta) 7 sec Bye

Start Connect v3.11b3 (beta) Boot [FF] FireFly v7
Port: BROM + PL; BROM force: Off;LSLA: On
Power device Off and connect cable now
BROM: Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #30 ] MediaTek USB Port (COM30) 0E8D:0003
Waiting for boot Ack...
Handshake... Ok
MT6739 HWs: 8A00 HWv: CA00 HWc: 0699 SWv: 0000 Evo: 0000 Zion [v5]; FireFly [FF] support: Yes
Sec: 0x0000 NoSec; BROM/BL ver 05/FE [BOOTROM]
MEID: 8EF661DFA672F38B2201797C8721933A
SOCID: E54B890E713B02ED95FB5EAAD4D371AB580E031A95AC28D4C8B692F3F05BB148
VNID: - generic
Exec v1... Ok
Start... Ok
Init... Ok
[fff] ping... v07.05.06.03.04.00
HW init...
Detect storage... Ok Ok
EMMC CID: F40122426977696E201100000947A55D crc Ok
Vendor: Biwin OEM: 0x0122 ID: 426977696E20 [426977696E20] PRV: 0x11 Serial: 2375 0x00000947
MM/YY: 10/2018
BOOT1/2: 0x00400000 4.00 Mb | 00400000 4.00 Mb
RPMB: 0x00400000 4.00 Mb
USER: 0x39A000000 14.41 Gb
CSD: D02701320F5903FFFFFFFFEF8A40001B
temp write protect: No
perm write protect: No
wp group: 0x10 en 0x01
EXTCSD rev1.7 EMMC 5.0 Firmware: 11
BOOT_CONFIG: 0x48 boot1+ack
BOOT_BUS_WIDTH: 0x00
RST_N_FUNCTION: 0x01
PART_S_COMPLETED: No
BOOT size: 0x00400000 4.00 Mb
RPMB size: 0x00400000 4.00 Mb
Size Market 16 Gb; Actual 0x39A000000 14.41 Gb
EOL: Status: Normal: Less than 80% reserved blocks used
EOL_A: SLC status: 0% - 10% used
EOL_B: MLC status: 0% - 10% used
Boot Ok 1 sec
SoC drivers: MediaTek DA USB VCOM (Android) v3.0.1512.0

Get 1st partition table... Ok 781 us GPT Ok
gpt: mbr protective;raw.len=4200
PGPT 36 entries

Read [preloader]... Ok 4 sec
PRELOADER: (0) MT6739 preloader_konka6739_a27_64_o.bin with 1 memory types [20181101-171702] slots: no
Read [preloader_backup]... Ok 4 sec
PRELOADER: (1) MT6739 preloader_konka6739_a27_64_o.bin with 1 memory types [20181101-171702] slots: no
load efuse...
BROM: On; sbc: Off; daa: Off; sla: Off; VNID: - generic

Device has no slots
Probe LK...
lk [9f956f5a] KONKA6739_A27_64_O-KONKA6739_A27_64_O

Probe boot... recovery gzip ramdisk.size=9.98 Mb; found 2 props boot gzip ramdisk.size=2.37 Mb; found 1 props Ok 6 sec
Patch Level: O11019
Display ID: KAAA27P_AUA_En_0.13.A23
SW Version: 1540282777
Ver. CodeName: REL
Sec. Patch: 2018-09-05
Build Time: 01/11/2018 09:15:35
Product Model: SE1
Product Brand: KONKA
Product Name: SE1
Product Device: SE1
CPU: arm64-v8a,armeabi-v7a,armeabi
CPU: armeabi-v7a,armeabi
CPU: arm64-v8a
Product Manfct: EastAeon
Product Info: SE1
SW: SE1-user 8.1.0 O11019 1540282777 release-keys
Build: KONKA/SE1/SE1:8.1.0/O11019/1540282777:user/release-keys
Product Board: KONKA
Board Platform: mt6739
ID: eastaeon-se1-konka-se1
Strategy [none/generic]
Firmware ID: MT6739_EastAeon_SE1_OSv8.1.0_KAAA27P_AUA_En_0.13.A23_O11019_SE1_KONKA
Android ver: 8.1.0
userdata: [ext4] FDE [forced encrypt] cache: [ext4]
Load userdata... Ok 47 us
userdata: 10.53 Gb [FS raw] encrypted
Verify [SoC] data... Ok 8 sec
Verify firmware [MT6739_EastAeon_SE1_OSv8.1.0_KAAA27P_AUA_En_0.13.A23_O11019_SE1_KONKA]... Firmware is unknown
Please upload Flash Files Database - iosFileUploader - Infinity Box Dongle #CM2 [BEST] Support 6 sec

Backup C:\Users\mirza asim\Downloads\Compressed\CM2MT2_311b3\backup\MT6739__8EF661DFA672F38B2201797C8721933A_eastaeon-se1-konka-se1\
[seccfg] Ok 7 sec
[nvram] Ok 4 sec
[protect1] Ok 6 sec
[protect2] Ok 7 sec
[proinfo] Ok 2 sec
[persist] Ok 38 sec
[lk] Ok 797 us [9f956f5a] KONKA6739_A27_64_O-KONKA6739_A27_64_O
[pgpt] Ok 62 us
[preloader] Ok 3 sec MT6739 preloader_konka6739_a27_64_o.bin with 1 memory types [20181101-171702] slots: no
[nvdata] Ok 26 sec
[nvcfg] Ok 6 sec
[sec1] Ok 1 sec ZEROES file deleted
Done 13 files
Pack... C:\Users\mirza asim\Downloads\Compressed\CM2MT2_311b3\backup\MT6739__8EF661DFA672F38B2201797C8721933A_eastaeon-se1-konka-se1\ Ok 3 sec
Verify C:\Users\mirza asim\Downloads\Compressed\CM2MT2_311b3\backup\MT6739__8EF661DFA672F38B2201797C8721933A_eastaeon-se1-konka-se1.7z Verified 14 sec

Load nvram... Ok 3 sec
NVRAM: 157 items; State: Ok
WiFi MAC: 8C:C5:E1:90:23:73
BT MAC: 8C:C5:E1:90:23:72
IMEI1: 00
IMEI2: 00
PSN1: N/A

get modem info... TK_MD_BASIC_MDBIN_PCB01_MT6739_S00.MOLY_LR12A_R2_MP_V46
RPMB #2... absent
Probe FRP... Most probably Off
Probe bootloader...
Bootloader v3 locked, oem-U, flag=01
Set [HW health] On to get hardware health state
Set [RPMB state] On to get RPMB state
Stop [Job 38246400] Connect v3.11b3 (beta) 3 min 13 sec

Start FRP Try to keep Userdata v3.11b3 (beta)
ID: eastaeon-se1-konka-se1
Strategy [none/generic]
Firmware ID: MT6739_EastAeon_SE1_OSv8.1.0_KAAA27P_AUA_En_0.13.A23_O11019_SE1_KONKA
Android ver: 8.1.0
userdata: [ext4] FDE [forced encrypt] cache: [ext4]
Backup exist C:\Users\mirza asim\Downloads\Compressed\CM2MT2_311b3\backup\MT6739__8EF661DFA672F38B2201797C8721933A_eastaeon-se1-konka-se1.7z
Reset FRP... frp config found
wipe frp... Ok 172 us Done(1)
rewipe frp... Ok 156 us
Reset Smart... leave intact
Stop [Job 38246400] FRP Try to keep Userdata v3.11b3 (beta) 937 us
If FRP still active make FRP with Userdata wipe