Help Bricked my Xiaomi Redmi 9A - trouble using SP Flash Tool

[changeme]

After bricking my redmi 9A(with black screen, no respond), I've done a little research and found the tutorial at youtube,

followed it, but I get stuck on the last step with a red "Download DA 100%" bar at the bottom, which after 2 minutes yields an "ERROR : STATUS_EXT_RAM_EXCEPTION (0xC0050005)" popup.

I tried doing it more than 10 times, I changed different PCs, cables, USB ports and roms but with same results.

I cannot figure out what the problem is. Is there any method I can unbrick my phone?

 

[LIL MOBI MECHANIC]

After bricking my redmi 9A(with black screen, no respond), I've done a little research and found the tutorial at youtube,

followed it, but I get stuck on the last step with a red "Download DA 100%" bar at the bottom, which after 2 minutes yields an "ERROR : STATUS_EXT_RAM_EXCEPTION (0xC0050005)" popup.

I tried doing it more than 10 times, I changed different PCs, cables, USB ports and roms but with same results.

I cannot figure out what the problem is. Is there any method I can unbrick my phone?

FIRST FORMAT ALL EXCEPT BOOTLOADER AND BYPASS AUTH IF REQUIRED RE-FLASH AGAIN IN DOWNLOAD ONLY MODE WITH LATEST SP FLASH TOOL

If u find my post helpful Please Press Like button is just 1 Click away! ​

 

[changeme]

I will try soon and leave feedback here

 

[changeme]

FIRST FORMAT ALL EXCEPT BOOTLOADER AND BYPASS AUTH IF REQUIRED RE-FLASH AGAIN IN DOWNLOAD ONLY MODE WITH LATEST SP FLASH TOOL

If u find my post helpful Please Press Like button is just 1 Click away! ​

I did try but without success, what I got is the same" I get stuck on the last step with a red "Download DA 100%" bar at the bottom, which after 2 minutes yields an "ERROR : STATUS_EXT_RAM_EXCEPTION (0xC0050005)" popup."

 

[LIL MOBI MECHANIC]

I did try but without success, what I got is the same" I get stuck on the last step with a red "Download DA 100%" bar at the bottom, which after 2 minutes yields an "ERROR : STATUS_EXT_RAM_EXCEPTION (0xC0050005)" popup."

TRY WITH DIFFERENT FIRMWARES AND IF POSSIBLE READ FIRMWARE FROM SAME MODEL AND TRY FLASHING IT IN YOUR BRICKED ONE
THIS ERROR IS MAINLY CAUSE BY WRONG FIRMWARE WHEN YOUR DEVICE MATCHES THE FIRMWARE IT WILL SUCCEFULLY FLASH AND YOUR DEVICE WILL BE ALIVE AGAIN
ONLY IN RARE CASE THIS ERROR IS CAUSED BY MEMORY ITSELF CHANCES ARE VERY HIGH IF DEVICE WAS IN "HANG ON LOGO OR BOOR LOOP" CONDITION BEFORE FLASHING BUT YOU MAY STILL TRY WITH DIFFERENT FIRMWARES MY FRIEND AND SEE YOUR PROBLEM WILL BE FIXED IM LITTLE BUSY RIGHT NOW ELSE I WOULD HAVE PROVIDED YOU SOME FIRMWARE LINKS I WILL TRY IF I GET TIME TILL THEN TRY THIS ONE

If u find my post helpful Please Press Like button is just 1 Click away! ​

 

[Mohamedfarahi]

Hey bro have solved the issue I have the same problem

 

[Matias_7]

Hola, perdón habló español.
Yo tuve el mismo problemas hace unos días y lo logre solucionar cambiando el DA por este DA_Note 9.bin en el SP Flash tool, y dandole en la opción download now. En SP Flash tool antes de poner el DA tenes que cambiar en opciones y luego general el craeck de DA asi te lo le. Y conetar el teléfono mediante el metodo Boom.

 

[Subway]

Qué exactamente hiciste, qué firmware usaste, por favor, no puedo salir de ese error.