UFi Emmc RPMB Clean by Ufi box Post Success report Here

[arhanmobile]

KMRP60014A FFU File Download Mega

KMRP60014A FFU File Download Mediafire

 

[sonu kh]

This is the health report of micron emmc, can it be repaired?​

Connection status: XHCI:HUB3[#5]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8843-6062
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J9D8 (0x53304a394438), rev: 0x10, serial number: 0x05991CBF
Manufacturing date: Aug 2018
CID: 13014E53 304A3944 38100599 1CBF8576
CSD: D05F0132 8F5913FF FFFFFFEF 964000A8
Device version: 0x0001
Firmware version: 0x7
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB
User area: 58.24 GiB(62,537,072,640 bytes)

eMMC 5.x Health report:
Device lifetime: Normal
Estimation of the device lifetime (SLC): Exceeded its maximum estimated device life time
Estimation of the device lifetime (MLC): Exceeded its maximum estimated device life time
Micron eMMC Secure Smart Report:
Spare Block info
Total spare block count: 251
Used spare blocks: 0.24%
Bad Block info
Total initial bad block count: 61
Total later bad block count: 0
Erase Count info
MLC area erase count Min: 0 Max: 2 Ave: 0
SLC area erase count Min: 1 Max: 34465 Ave: 2
Sector Erase Count info
Total number of block erase count tables: 6

 

[arhanmobile]

This is the health report of micron emmc, can it be repaired?​

Connection status: XHCI:HUB3[#5]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8843-6062
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J9D8 (0x53304a394438), rev: 0x10, serial number: 0x05991CBF
Manufacturing date: Aug 2018
CID: 13014E53 304A3944 38100599 1CBF8576
CSD: D05F0132 8F5913FF FFFFFFEF 964000A8
Device version: 0x0001
Firmware version: 0x7
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB
User area: 58.24 GiB(62,537,072,640 bytes)

eMMC 5.x Health report:
Device lifetime: Normal
Estimation of the device lifetime (SLC): Exceeded its maximum estimated device life time
Estimation of the device lifetime (MLC): Exceeded its maximum estimated device life time
Micron eMMC Secure Smart Report:
Spare Block info
Total spare block count: 251
Used spare blocks: 0.24%
Bad Block info
Total initial bad block count: 61
Total later bad block count: 0
Erase Count info
MLC area erase count Min: 0 Max: 2 Ave: 0
SLC area erase count Min: 1 Max: 34465 Ave: 2
Sector Erase Count info
Total number of block erase count tables: 6

No

 

[OelAii Tech]

need

KMV3W000LM​

KLMDG4UCTA-B041​

FFU file please

 

[faraday]

The year is 2024. When was UFI last seen? It was seen in 2022. UFI tool and box are dead. The project is dead. Shame on those who deceive people. When will you wake up, lazy people?

 

[OelAii Tech]

The year is 2024. When was UFI last seen? It was seen in 2022. UFI tool and box are dead. The project is dead. Shame on those who deceive people. When will you wake up, lazy people?

When the death? do you go to the funeral? if there are other die please tell me

 

[MagicToilet]

i have a question sir ,why do we have to clean rpmb ?what si the reason ,Thank you

 

[lehoangvudt]

I need SANDISK DA4032 firmware file. please help me !