World First FIGI G6 FLASH FILE FREE figi g6 dead boot recover done hong on logo fix

[taimur-ahmad]

FIGI G6 FLASH FILE FREE figi g6 dead boot recover done hong on logo fix
​

Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.15

Load IDBase v729152 Ok!


Operation : Identify [ v2.15 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM32)
MODE : PRELOADER PORT
PORT : 32
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2028 | Manual : Disabled
BROM : SOCID : 44B20985F986A76D0214B1E504DE1F747F5FAF4B3304CD638B891741A144704D
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 13014E51324A3336431000621907289
EMMC: VEN : MICRON | OEM : 4E01 | DEV : Q2J36C
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3AB400000 [ 14.68 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : F8F35E7314044683D7A3289628E6788B

DA : USB : HIGH-SPEED

Boot done!

Patch Level : PPR1.180610.011
Display ID : FiGi-G6-Android9-1-21102020
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-05-05
Build Time : 21.10.2020
Product Model : G6
Product Brand : FiGi
Product Name : G6
Product Device : G6
Product Manfct : FiGi
Product Info : g1859ph_v2_gu_ten_v9l10_p
Product Board : g1859ph_v2_gu_ten_v9l10_p
Board Platform : mt6739

USERDATA : FILESYSTEM : EXT4 with FDE ( Full Disk Encryption **)


STORAGE : LifeStatus : eMMC : OK!

Done!
Elapsed: 00:00:23

Operation : Read Firmware [ v2.15 ]

ExtSparse : Enabled
ForceRead : Enabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM32)
MODE : PRELOADER PORT
PORT : 32
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2028 | Manual : Disabled
BROM : SOCID : 44B20985F986A76D0214B1E504DE1F747F5FAF4B3304CD638B891741A144704D
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 13014E51324A3336431000621907289
EMMC: VEN : MICRON | OEM : 4E01 | DEV : Q2J36C
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3AB400000 [ 14.68 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : F8F35E7314044683D7A3289628E6788B

DA : USB : HIGH-SPEED

Boot done!

Patch Level : PPR1.180610.011
Display ID : FiGi-G6-Android9-1-21102020
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-05-05
Build Time : 21.10.2020
Product Model : G6
Product Brand : FiGi
Product Name : G6
Product Device : G6
Product Manfct : FiGi
Product Info : g1859ph_v2_gu_ten_v9l10_p
Product Board : g1859ph_v2_gu_ten_v9l10_p
Board Platform : mt6739

MT6739__FiGi__G6__9__FiGi-G6-Android9-1-21102020__PPR1.180610.011__g1859ph_v2_gu_ten_v9l10_p

Read : preloader.bin
Read : recovery.img
Read : persist.img
ExtSparse : Compression ratio : 84%
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : teksunhw.img
Read : vendor.img
ExtSparse : Compression ratio : 63%
Read : system.img
ExtSparse : Compression ratio : 9%
Read : cache.img
Read : userdata.img

FW Size : 2.17 GB
Android Info saved : _Android_info.txt
Scatter : MT6739_Android_scatter.txt
Saved to : C:\Users\TAIMUR\Pictures\Camera Roll\MT6739__FiGi__G6__9__FiGi-G6-Android9-1-21102020__PPR1.180610.011__g1859ph_v2_gu_ten_v9l10_p\

Done!
Elapsed: 00:02:44

Operation : Read Firmware [ v2.15 ]

ExtSparse : Enabled
ForceRead : Enabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM32)
MODE : PRELOADER PORT
PORT : 32
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2028 | Manual : Disabled
BROM : SOCID : CFBFC7E1309086BF3ADC09BCBECD45489DFA442BE295AE2728DBFB07A80ECAB1
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 13014E51324A3336431000621907289
EMMC: VEN : MICRON | OEM : 4E01 | DEV : Q2J36C
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3AB400000 [ 14.68 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 988B8BF84787FAF16EE2A283150023E

DA : USB : HIGH-SPEED

Boot done!

Patch Level : PPR1.180610.011
Display ID : FiGi-G6-Android9-1-21102020
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-05-05
Build Time : 21.10.2020
Product Model : G6
Product Brand : FiGi
Product Name : G6
Product Device : G6
Product Manfct : FiGi
Product Info : g1859ph_v2_gu_ten_v9l10_p
Product Board : g1859ph_v2_gu_ten_v9l10_p
Board Platform : mt6739

MT6739__FiGi__G6__9__FiGi-G6-Android9-1-21102020__PPR1.180610.011__g1859ph_v2_gu_ten_v9l10_p

Read : preloader.bin
Read : recovery.img
Read : persist.img
ExtSparse : Compression ratio : 85%
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : teksunhw.img
Read : vendor.img
ExtSparse : Compression ratio : 63%
Read : system.img
ExtSparse : Compression ratio : 9%
Read : cache.img
Read : userdata.img

FW Size : 2.17 GB
Android Info saved : _Android_info.txt
Scatter : MT6739_Android_scatter.txt
Saved to : C:\Users\TAIMUR\Pictures\Camera Roll\new fix ok\MT6739__FiGi__G6__9__FiGi-G6-Android9-1-21102020__PPR1.180610.011__g1859ph_v2_gu_ten_v9l10_p\

Done!
Elapsed: 00:02:44

Created by Infinity-Box (c) 2020
Chinese Miracle II : MediaTek Service Module
Device Info file : _Android_info.txt

Patch Level : PPR1.180610.011
Display ID : FiGi-G6-Android9-1-21102020
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-05-05
Build Time : 21.10.2020
Product Model : G6
Product Brand : FiGi
Product Name : G6
Product Device : G6
Product Manfct : FiGi
Product Info : g1859ph_v2_gu_ten_v9l10_p
Product Board : g1859ph_v2_gu_ten_v9l10_p
Board Platform : mt6739

Preloader [HW DEV] Info :
EMI : DEV : MT6739
EMI : SRC : preloader_g1859ph_v2_gu_ten_v9l10_p.bin
EMI : CNT : 000B
EMI : [00] : eMMC : DDR3 : ID : 13014E51324A333643 : VEN : MICRON | DEV : Q2J36C : RAM : [ 2.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 700100454841434541 : VEN : KINGSTON | DEV : EHACEA : RAM : [ 2.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 700100454841454641 : VEN : KINGSTON | DEV : EHAEFA : RAM : [ 2.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG | DEV : QE63MB : RAM : [ 2.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 450100444634303136 : VEN : SANDISK | DEV : DF4016 : RAM : [ 2.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 90014A484147326505 : VEN : HYNIX | DEV : HAG2e : RAM : [ 2.00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 150100513832334D42 : VEN : SAMSUNG | DEV : Q823MB : RAM : [ 2.00 GB ]
EMI : [08] : eMMC : DDR3 : ID : 880103443944313647 : VEN : FORESEE | DEV : D9D16G : RAM : [ 2.00 GB ]
EMI : [09] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 2.00 GB ]
EMI : [0A] : eMMC : DDR3 : ID : 13014E51324A333643 : VEN : MICRON | DEV : Q2J36C : RAM : [ 2.00 GB ]

Operation : Write Flash [ v2.15 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled

Files :20
[FL] : Set : preloader_g1859ph_v2_gu_ten_v9l10_p.bin
[FL] : Set : recovery.img
[FL] : Set : md1rom.img
[FL] : Set : md1dsp.img
[FL] : Set : spmfw.img
[FL] : Set : mcupmfw.img
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : loader_ext.img
[FL] : Set : loader_ext.img
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : dtbo.img
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : teksunhw.img
[FL] : Set : vendor.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x8A0645A8 [ 2.16 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM32)
MODE : PRELOADER PORT
PORT : 32
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2028 | Manual : Disabled
BROM : SOCID : 44B20985F986A76D0214B1E504DE1F747F5FAF4B3304CD638B891741A144704D
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 13014E51324A3336431000621907289
EMMC: VEN : MICRON | OEM : 4E01 | DEV : Q2J36C
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3AB400000 [ 14.68 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : F8F35E7314044683D7A3289628E6788B

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000002E88000
Erase : 0x0000000003688000 : 0x0000000004000000
Erase : 0x0000000008800000 : 0x0000000000800000
Erase : 0x000000000C000000 : 0x0000000000200000
Erase : 0x000000000C500000 : 0x0000000007200000
Erase : 0x0000000013C00000 : 0x0000000000200000
Erase : 0x0000000013E20000 : 0x00000001731E0000

[FL] : RePartition
[FL] : RePartition Ok!


[FL] : Flashing now ...

Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : RECOVERY
Write : MD1IMG
Write : MD1DSP
Write : SPMFW
Write : MCUPMFW
Write : LK
Write : LK2
Write : LOADER_EXT1
Write : LOADER_EXT2
Write : BOOT
Write : LOGO
Write : DTBO
Write : TEE1
Write : TEE2
Write : TEKSUNHW
Write : VENDOR
Write : SYSTEM
Write : CACHE
Write : USERDATA

[FL] : RePartition
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:02:33

 

[engr_imran]

where is the link dear

 

[awais_software]

FIGI G6 FLASH FILE FREE figi g6 dead boot recover done hong on logo fix
View attachment 30641 ​

Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.15

Load IDBase v729152 Ok!


Operation : Identify [ v2.15 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM32)
MODE : PRELOADER PORT
PORT : 32
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2028 | Manual : Disabled
BROM : SOCID : 44B20985F986A76D0214B1E504DE1F747F5FAF4B3304CD638B891741A144704D
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 13014E51324A3336431000621907289
EMMC: VEN : MICRON | OEM : 4E01 | DEV : Q2J36C
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3AB400000 [ 14.68 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : F8F35E7314044683D7A3289628E6788B

DA : USB : HIGH-SPEED

Boot done!

Patch Level : PPR1.180610.011
Display ID : FiGi-G6-Android9-1-21102020
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-05-05
Build Time : 21.10.2020
Product Model : G6
Product Brand : FiGi
Product Name : G6
Product Device : G6
Product Manfct : FiGi
Product Info : g1859ph_v2_gu_ten_v9l10_p
Product Board : g1859ph_v2_gu_ten_v9l10_p
Board Platform : mt6739

USERDATA : FILESYSTEM : EXT4 with FDE ( Full Disk Encryption **)


STORAGE : LifeStatus : eMMC : OK!

Done!
Elapsed: 00:00:23

Operation : Read Firmware [ v2.15 ]

ExtSparse : Enabled
ForceRead : Enabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM32)
MODE : PRELOADER PORT
PORT : 32
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2028 | Manual : Disabled
BROM : SOCID : 44B20985F986A76D0214B1E504DE1F747F5FAF4B3304CD638B891741A144704D
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 13014E51324A3336431000621907289
EMMC: VEN : MICRON | OEM : 4E01 | DEV : Q2J36C
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3AB400000 [ 14.68 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : F8F35E7314044683D7A3289628E6788B

DA : USB : HIGH-SPEED

Boot done!

Patch Level : PPR1.180610.011
Display ID : FiGi-G6-Android9-1-21102020
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-05-05
Build Time : 21.10.2020
Product Model : G6
Product Brand : FiGi
Product Name : G6
Product Device : G6
Product Manfct : FiGi
Product Info : g1859ph_v2_gu_ten_v9l10_p
Product Board : g1859ph_v2_gu_ten_v9l10_p
Board Platform : mt6739

MT6739__FiGi__G6__9__FiGi-G6-Android9-1-21102020__PPR1.180610.011__g1859ph_v2_gu_ten_v9l10_p

Read : preloader.bin
Read : recovery.img
Read : persist.img
ExtSparse : Compression ratio : 84%
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : teksunhw.img
Read : vendor.img
ExtSparse : Compression ratio : 63%
Read : system.img
ExtSparse : Compression ratio : 9%
Read : cache.img
Read : userdata.img

FW Size : 2.17 GB
Android Info saved : _Android_info.txt
Scatter : MT6739_Android_scatter.txt
Saved to : C:\Users\TAIMUR\Pictures\Camera Roll\MT6739__FiGi__G6__9__FiGi-G6-Android9-1-21102020__PPR1.180610.011__g1859ph_v2_gu_ten_v9l10_p\

Done!
Elapsed: 00:02:44

Operation : Read Firmware [ v2.15 ]

ExtSparse : Enabled
ForceRead : Enabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM32)
MODE : PRELOADER PORT
PORT : 32
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2028 | Manual : Disabled
BROM : SOCID : CFBFC7E1309086BF3ADC09BCBECD45489DFA442BE295AE2728DBFB07A80ECAB1
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 13014E51324A3336431000621907289
EMMC: VEN : MICRON | OEM : 4E01 | DEV : Q2J36C
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3AB400000 [ 14.68 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 988B8BF84787FAF16EE2A283150023E

DA : USB : HIGH-SPEED

Boot done!

Patch Level : PPR1.180610.011
Display ID : FiGi-G6-Android9-1-21102020
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-05-05
Build Time : 21.10.2020
Product Model : G6
Product Brand : FiGi
Product Name : G6
Product Device : G6
Product Manfct : FiGi
Product Info : g1859ph_v2_gu_ten_v9l10_p
Product Board : g1859ph_v2_gu_ten_v9l10_p
Board Platform : mt6739

MT6739__FiGi__G6__9__FiGi-G6-Android9-1-21102020__PPR1.180610.011__g1859ph_v2_gu_ten_v9l10_p

Read : preloader.bin
Read : recovery.img
Read : persist.img
ExtSparse : Compression ratio : 85%
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : teksunhw.img
Read : vendor.img
ExtSparse : Compression ratio : 63%
Read : system.img
ExtSparse : Compression ratio : 9%
Read : cache.img
Read : userdata.img

FW Size : 2.17 GB
Android Info saved : _Android_info.txt
Scatter : MT6739_Android_scatter.txt
Saved to : C:\Users\TAIMUR\Pictures\Camera Roll\new fix ok\MT6739__FiGi__G6__9__FiGi-G6-Android9-1-21102020__PPR1.180610.011__g1859ph_v2_gu_ten_v9l10_p\

Done!
Elapsed: 00:02:44

Created by Infinity-Box (c) 2020
Chinese Miracle II : MediaTek Service Module
Device Info file : _Android_info.txt

Patch Level : PPR1.180610.011
Display ID : FiGi-G6-Android9-1-21102020
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-05-05
Build Time : 21.10.2020
Product Model : G6
Product Brand : FiGi
Product Name : G6
Product Device : G6
Product Manfct : FiGi
Product Info : g1859ph_v2_gu_ten_v9l10_p
Product Board : g1859ph_v2_gu_ten_v9l10_p
Board Platform : mt6739

Preloader [HW DEV] Info :
EMI : DEV : MT6739
EMI : SRC : preloader_g1859ph_v2_gu_ten_v9l10_p.bin
EMI : CNT : 000B
EMI : [00] : eMMC : DDR3 : ID : 13014E51324A333643 : VEN : MICRON | DEV : Q2J36C : RAM : [ 2.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 700100454841434541 : VEN : KINGSTON | DEV : EHACEA : RAM : [ 2.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 700100454841454641 : VEN : KINGSTON | DEV : EHAEFA : RAM : [ 2.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG | DEV : QE63MB : RAM : [ 2.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 450100444634303136 : VEN : SANDISK | DEV : DF4016 : RAM : [ 2.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 90014A484147326505 : VEN : HYNIX | DEV : HAG2e : RAM : [ 2.00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 150100513832334D42 : VEN : SAMSUNG | DEV : Q823MB : RAM : [ 2.00 GB ]
EMI : [08] : eMMC : DDR3 : ID : 880103443944313647 : VEN : FORESEE | DEV : D9D16G : RAM : [ 2.00 GB ]
EMI : [09] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 2.00 GB ]
EMI : [0A] : eMMC : DDR3 : ID : 13014E51324A333643 : VEN : MICRON | DEV : Q2J36C : RAM : [ 2.00 GB ]

Operation : Write Flash [ v2.15 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled

Files :20
[FL] : Set : preloader_g1859ph_v2_gu_ten_v9l10_p.bin
[FL] : Set : recovery.img
[FL] : Set : md1rom.img
[FL] : Set : md1dsp.img
[FL] : Set : spmfw.img
[FL] : Set : mcupmfw.img
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : loader_ext.img
[FL] : Set : loader_ext.img
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : dtbo.img
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : teksunhw.img
[FL] : Set : vendor.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x8A0645A8 [ 2.16 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM32)
MODE : PRELOADER PORT
PORT : 32
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2028 | Manual : Disabled
BROM : SOCID : 44B20985F986A76D0214B1E504DE1F747F5FAF4B3304CD638B891741A144704D
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 13014E51324A3336431000621907289
EMMC: VEN : MICRON | OEM : 4E01 | DEV : Q2J36C
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3AB400000 [ 14.68 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : F8F35E7314044683D7A3289628E6788B

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000002E88000
Erase : 0x0000000003688000 : 0x0000000004000000
Erase : 0x0000000008800000 : 0x0000000000800000
Erase : 0x000000000C000000 : 0x0000000000200000
Erase : 0x000000000C500000 : 0x0000000007200000
Erase : 0x0000000013C00000 : 0x0000000000200000
Erase : 0x0000000013E20000 : 0x00000001731E0000

[FL] : RePartition
[FL] : RePartition Ok!


[FL] : Flashing now ...

Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : RECOVERY
Write : MD1IMG
Write : MD1DSP
Write : SPMFW
Write : MCUPMFW
Write : LK
Write : LK2
Write : LOADER_EXT1
Write : LOADER_EXT2
Write : BOOT
Write : LOGO
Write : DTBO
Write : TEE1
Write : TEE2
Write : TEKSUNHW
Write : VENDOR
Write : SYSTEM
Write : CACHE
Write : USERDATA

[FL] : RePartition
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:02:33

where is flash file link.....


please upload link of this file thanks

 

[Infinity-Box]

Dear Sirs,

If you have good flash files and if you want to share it with other users please use IOS File Uploader Tool

Please login to view image

Please upload only GOOD WORKING files without password

 

[niceraees00987]

file link plz thanks advance

 

[Infinity-Box]

yes, I am waiting for link too!

 

[MajidAli555]

where is flash file link.....


please upload link of this file thanks

Upload the file Please...????