Games Over Vivo Phone Latest Security Add Z3X Pandora Box Pandora setup 4.8 New Update!

riyaan786

Active Member
Oct 7, 2022
15
4
pakistan
Selected model: Vivo PD2156F (Y76 5G)
Operation: Repair
Software version: 4.8
Work ID: 1029009

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
LibUSB installed
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xD34F8ED4, 0xF9E51BA6, 0x634A2CA3, 0xB27FAADD
Load DownloadAgent... OK
Search DA... OK [11]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
UFS CID (FW VER): H9HQ21AFAMADAR (A043)
Advanced Bypass Security... OK
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [14]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9HQ21AFAMADAR
UFS_FWVER : A043
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x3B96000000 (238.34Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... error(STATUS_PARTITION_TBL_NOT_EXIST)
 
  • Like
Reactions: phool

All TECH 4 You

Friend's Martview
Feb 26, 2019
674
289
Ahemdabad,Gujrat
Selected model: Vivo PD2156F (Y76 5G)
Operation: Repair
Software version: 4.8
Work ID: 1029009

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
LibUSB installed
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xD34F8ED4, 0xF9E51BA6, 0x634A2CA3, 0xB27FAADD
Load DownloadAgent... OK
Search DA... OK [11]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
UFS CID (FW VER): H9HQ21AFAMADAR (A043)
Advanced Bypass Security... OK
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [14]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9HQ21AFAMADAR
UFS_FWVER : A043
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x3B96000000 (238.34Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... error(STATUS_PARTITION_TBL_NOT_EXIST)
You mean pandora new setup will all vivo mobiles pattern lock & FRP Lock removed by Preloader mode not via Brom mode

Am I right if yes then other team will be upload new setup

Thanks & Regards By:All TECH 4 You
 

All TECH 4 You

Friend's Martview
Feb 26, 2019
674
289
Ahemdabad,Gujrat
You mean pandora new setup will all vivo mobiles pattern lock & FRP Lock removed by Preloader mode not via Brom mode

Am I right if yes then other team will be upload new setup

Thanks & Regards By:All TECH 4 You

Without TestPoint? Vivo Y21 V2111 august security?

check my all threats ::

MPT Team Please ADD Vivo Y12 1904 Pattern Lock & FRP Lock Remove With Preloader Mode & Without TEST

MPT Team ADD Vivo Y21G V2152 PL & FRP Lock Remove With Preloader Mode Only & Without BROM TEST Point

MPT Team ADD Vivo Y20G V2037 PL& FRP Lock Remove With Preloader Mode & Without BROM TEST Point

Thanks & Regards By:All TECH 4 You
 

alitabraiz83

Junior Member
Feb 28, 2021
4
0
sialkot chawinda
Selected model: Vivo Mediatek
Operation: Erase FRP And Wipe
Software version: 4.10
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to BOX in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM15 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... timeout
 
Top