- Nov 7, 2018
- 234
- 45
- Sonork ID
- 100.1654602
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM17)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 150100514531334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM13)
Build Date: 2018年 03月 06日 星期二 17:14:36 CST
Display ID: amigo4.0
Build ID: NRD90M
Version: 7.0
Mediatek Version Release: SWW1631GI_0201_T5467
Brand: GIONEE
Device: GIONEE_SWW1631
Manufacturer: GIONEE
Model: GIONEE X1
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 865619036325448
IMEI[2] from NVRAM: 865619036325455
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro
Reading: BEGIN: 0x5200000 - LEN: 0x600000
Start processing trustzone
Start processing frp ......
Reading: BEGIN: 0x6a00000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x6b00000 - LEN: 0x2000000
Start processing system
Reading: BEGIN: 0xb000000 - LEN: 0x100000000
Saved to : C:\Users\ANUJMISHRA\Documents\Android_MTK\firmware_backup\MT6737T_EMMC_GIONEE_GIONEE X1_7_0_SWW1631GI_0201_T5467(2018_11_20_23_40)
Wait untill phone will start charging.
All done.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM17)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 150100514531334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM13)
Build Date: 2018年 03月 06日 星期二 17:14:36 CST
Display ID: amigo4.0
Build ID: NRD90M
Version: 7.0
Mediatek Version Release: SWW1631GI_0201_T5467
Brand: GIONEE
Device: GIONEE_SWW1631
Manufacturer: GIONEE
Model: GIONEE X1
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 865619036325448
IMEI[2] from NVRAM: 865619036325455
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro
Reading: BEGIN: 0x5200000 - LEN: 0x600000
Start processing trustzone
Start processing frp ......
Reading: BEGIN: 0x6a00000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x6b00000 - LEN: 0x2000000
Start processing system
Reading: BEGIN: 0xb000000 - LEN: 0x100000000
Saved to : C:\Users\ANUJMISHRA\Documents\Android_MTK\firmware_backup\MT6737T_EMMC_GIONEE_GIONEE X1_7_0_SWW1631GI_0201_T5467(2018_11_20_23_40)
Wait untill phone will start charging.
All done.