HUAWEI E303 UNLOCK SOFTWARE

ALASCO1

Member
May 3, 2019
13
0
Please, can some one give me solution to unlock HUAWEI MODEM E303 that does not pop-up where to insert code.

I dont know if e8231s-1 SOLUTION posted by MART will also work for it.........Thanks in advance!
 

Admin

Administrator
Oct 21, 2016
1,118
2,887
Australia, Malaysia & Lebanon
How To Put Huawei Modem Unlock Code Via DC Unlocker
  1. Get Unlock Code With Code Calculator ( V1, V2 Or V201 Unlock Code )
  2. Connect the device with PC
  3. Scan on DC Unlocker
  4. Put Unlock Code Via AT Command
  5. AT^CARDLOCK="XXXXXXXX" Example (AT^CARDLOCK="42508467")
  6. Unlock Done
 

ALASCO1

Member
May 3, 2019
13
0
THANKS FOR YOUR PROM
How To Put Huawei Modem Unlock Code Via DC Unlocker
  1. Get Unlock Code With Code Calculator ( V1, V2 Or V201 Unlock Code )
  2. Connect the device with PC
  3. Scan on DC Unlocker
  4. Put Unlock Code Via AT Command
  5. AT^CARDLOCK="XXXXXXXX" Example (AT^CARDLOCK="42508467")
  6. Unlock Done
THANKS FOR YOUR PROMPT REPLY.....HAVE DONE THAT AND IT DISPLAY ....OK, BUT STILL DONT UNLOCK.
 

ALASCO1

Member
May 3, 2019
13
0
If you see Ok Result then your device in 100% Unlocked you need to update firmware your after the update everything will be ok
THANKS FOR YOUR PROMPT RESPONSE ALWAYS. HAVE TRY A LOT FIRMWARE, BUT AM ALWAYS STUCK AT ERROR 19 CAN'T UPDATE. ANY HELP ON THAT? THANKS.
 

Admin

Administrator
Oct 21, 2016
1,118
2,887
Australia, Malaysia & Lebanon
Use USBSafe.bin Method it will flash without any error

1: Short Boot Point And Connect To PC USB Port

1. FcSerialDrv: Install Drivers

2. Start Balong_USB_Downloader And and use E303 USBSafe.bin

3. Flash firmware.bin with Huawei Modem Flasher v1.6 It will give error on part 4

3b. Apply commends with Terminal:
at^godload
AT^SIGNVER=1,0,778A8D175E602B7B779D9E05C330B5279B0661BF2EED99A20445B366D63DD697,2694

5. Update WEB UI

6. HuaweiCalc: Calc V201 Code Via Imie

7. Put Wrong Sim Card And Enter Unlock Code

it's Done


Example:
 

ALASCO1

Member
May 3, 2019
13
0
Use USBSafe.bin Method it will flash without any error

1: Short Boot Point And Connect To PC USB Port

1. FcSerialDrv: Install Drivers

2. Start Balong_USB_Downloader And and use E303 USBSafe.bin

3. Flash firmware.bin with Huawei Modem Flasher v1.6 It will give error on part 4

3b. Apply commends with Terminal:
at^godload
AT^SIGNVER=1,0,778A8D175E602B7B779D9E05C330B5279B0661BF2EED99A20445B366D63DD697,2694

5. Update WEB UI

6. HuaweiCalc: Calc V201 Code Via Imie

7. Put Wrong Sim Card And Enter Unlock Code

it's Done


Example:
Have try the above method still no way.......ouch!!!!!!!!
 
Top