Welcome to Medusa Pro Software version 1.4.1. Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Reader #2: FT SCR2000 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Huawei
Model : Y530-U00
SRF : D:/JTAG/medusa + pro/medusa pro/Y530-U00/Huawei_Y530-U00_EMMC_H4G1D.srf
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto
Connecting...
Device : Hynix eMMC H4G1d
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473164040300A5AE48219B
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G1d
Product revision : 0.3
Product serial number : (hex) A5AE48
Manufacturing date : 02/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : 00111000
Boot partition enable : User area (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Ok
Disk/Image size : e9000000 bytes
Device sector size : 512 bytes
Partition offset : 1589248
Number of sectors : 2097152
Device Manufacturer : Huawei
Device Platform : msm8610
Build ID : HuaweiY530-U00
Display Build ID : Y530-U00V100R001C900B172
Release ID : 4.3
Device Model : HUAWEI Y530-U00
Device Name : Y530-U00
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Build Description : msm7627a-eng 2.3.5 GRJ90 eng.hongtao.20111013.064550 test-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G1d_01_08_2017_16_41_08.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.4.1; FW: 1.20.
P00: GPT (00000000, 00000022)
P01: sbl1 (00000022, 00000400)
P02: sdi (00000422, 00000040)
P03: DDR (00002000, 00000040)
P04: rpm (00004000, 000003E8)
P05: tz (000043E8, 000003E8)
P06: aboot (000047D0, 00002BB0)
P07: pad (00007380, 00000800)
P08: oeminfo (00007B80, 00020000)
P09: modemst1 (00027B80, 00002000)
P10: modemst2 (00029B80, 00002000)
P11: modem (0002C000, 00030000)
P12: fsg (0005C000, 00002000)
P13: fsc (0005E000, 00000002)
P14: ssd (0005E002, 00000010)
P15: log (0005E012, 00010000)
P16: bkbootup (00070000, 00020000)
P17: persist (00090000, 00004000)
P18: boot (00094000, 00006000)
P19: recovery (0009A000, 00008000)
P20: cust (000A2000, 00080000)
P21: cache (00122000, 00060000)
P22: misc (00182000, 00002000)
P23: system (00184000, 00200000)
P24: userdata (00384000, 00200000)
P25: grow (00584000, 001C3FDF)
Repairing from file "D:/JTAG/medusa + pro/medusa pro/Y530-U00/Huawei_Y530-U00_EMMC_H4G1D.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing sbl1 partition... Done.
Writing sdi partition... Done.
Writing DDR partition... Done.
Writing rpm partition... Done.
Writing tz partition... Done.
Writing aboot partition... Done.
Writing pad partition... Done.
Writing oeminfo partition... Done.
Writing modemst1 partition... Done.
Writing modemst2 partition... Done.
Writing modem partition... Done.
Writing fsg partition... Done.
Writing fsc partition... Done.
Writing ssd partition... Done.
Writing log partition... Done.
Writing bkbootup partition... Done.
Writing persist partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing cust partition... Done.
Writing cache partition... Done.
Writing misc partition... Done.
Writing system partition... Done.
Writing userdata partition... Done.
Writing grow partition... Done.
Smart Repair is successfully complete.
SW: 1.4.1; FW: 1.20.
Disconnected.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Reader #2: FT SCR2000 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Huawei
Model : Y530-U00
SRF : D:/JTAG/medusa + pro/medusa pro/Y530-U00/Huawei_Y530-U00_EMMC_H4G1D.srf
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto
Connecting...
Device : Hynix eMMC H4G1d
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info
CID : 90014A4834473164040300A5AE48219B
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G1d
Product revision : 0.3
Product serial number : (hex) A5AE48
Manufacturing date : 02/2014
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : 00111000
Boot partition enable : User area (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Ok
Disk/Image size : e9000000 bytes
Device sector size : 512 bytes
Partition offset : 1589248
Number of sectors : 2097152
Device Manufacturer : Huawei
Device Platform : msm8610
Build ID : HuaweiY530-U00
Display Build ID : Y530-U00V100R001C900B172
Release ID : 4.3
Device Model : HUAWEI Y530-U00
Device Name : Y530-U00
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Build Description : msm7627a-eng 2.3.5 GRJ90 eng.hongtao.20111013.064550 test-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G1d_01_08_2017_16_41_08.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.4.1; FW: 1.20.
P00: GPT (00000000, 00000022)
P01: sbl1 (00000022, 00000400)
P02: sdi (00000422, 00000040)
P03: DDR (00002000, 00000040)
P04: rpm (00004000, 000003E8)
P05: tz (000043E8, 000003E8)
P06: aboot (000047D0, 00002BB0)
P07: pad (00007380, 00000800)
P08: oeminfo (00007B80, 00020000)
P09: modemst1 (00027B80, 00002000)
P10: modemst2 (00029B80, 00002000)
P11: modem (0002C000, 00030000)
P12: fsg (0005C000, 00002000)
P13: fsc (0005E000, 00000002)
P14: ssd (0005E002, 00000010)
P15: log (0005E012, 00010000)
P16: bkbootup (00070000, 00020000)
P17: persist (00090000, 00004000)
P18: boot (00094000, 00006000)
P19: recovery (0009A000, 00008000)
P20: cust (000A2000, 00080000)
P21: cache (00122000, 00060000)
P22: misc (00182000, 00002000)
P23: system (00184000, 00200000)
P24: userdata (00384000, 00200000)
P25: grow (00584000, 001C3FDF)
Repairing from file "D:/JTAG/medusa + pro/medusa pro/Y530-U00/Huawei_Y530-U00_EMMC_H4G1D.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing sbl1 partition... Done.
Writing sdi partition... Done.
Writing DDR partition... Done.
Writing rpm partition... Done.
Writing tz partition... Done.
Writing aboot partition... Done.
Writing pad partition... Done.
Writing oeminfo partition... Done.
Writing modemst1 partition... Done.
Writing modemst2 partition... Done.
Writing modem partition... Done.
Writing fsg partition... Done.
Writing fsc partition... Done.
Writing ssd partition... Done.
Writing log partition... Done.
Writing bkbootup partition... Done.
Writing persist partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing cust partition... Done.
Writing cache partition... Done.
Writing misc partition... Done.
Writing system partition... Done.
Writing userdata partition... Done.
Writing grow partition... Done.
Smart Repair is successfully complete.
SW: 1.4.1; FW: 1.20.
Disconnected.
