DTPro Huawei Y6 2018 - IMEI repair Ok

DTPro Tool

Rich90

Junior Member
Nov 20, 2020
2
0
Colombia
23/12/2020 5:29:19 p.m. - Autodetect COM port and phone type start!
23/12/2020 5:29:19 p.m. - Found COM port
23/12/2020 5:29:19 p.m. - Found phone type Selected: Huawei Android phone (Qualcomm CPU)
23/12/2020 5:29:19 p.m. - New IMEI 1 : N/A
23/12/2020 5:29:19 p.m. - New Bluetooth MAC : skip
23/12/2020 5:29:19 p.m. - New WiFi MAC : skip
23/12/2020 5:29:19 p.m. - New SN : skip
23/12/2020 5:29:19 p.m. - New PCB SN : skip
23/12/2020 5:29:19 p.m. - New Vendor : skip
23/12/2020 5:29:19 p.m. - New Country : skip
23/12/2020 5:29:19 p.m. - New Model : skip
23/12/2020 5:29:19 p.m. - Checking DB Started
23/12/2020 5:29:19 p.m. - Connecting to phone....
23/12/2020 5:29:19 p.m. - Connected!
23/12/2020 5:29:19 p.m. - CP State: ready
23/12/2020 5:29:19 p.m. - Read phone basic info...
23/12/2020 5:29:19 p.m. - Read phone secure info...

23/12/2020 5:29:20 p.m. - Phone info data backup Unsupported for Qualcomm devices

23/12/2020 5:29:20 p.m. - Read from DataBase!
23/12/2020 5:29:20 p.m. - Read from database success!
23/12/2020 5:29:20 p.m. - Read from DataBase!
23/12/2020 5:29:20 p.m. - Read from DataBase success!
23/12/2020 5:29:20 p.m. - Writing SN...
23/12/2020 5:29:20 p.m. - Write SN success!
23/12/2020 5:29:20 p.m. - Phone secure identify start
23/12/2020 5:29:20 p.m. - Phone secure identify success!
23/12/2020 5:29:20 p.m. - Writing MAC...
23/12/2020 5:29:20 p.m. - Read from DataBase...
23/12/2020 5:29:21 p.m. - Read from DataBase success!
23/12/2020 5:29:21 p.m. - Write MAC success!
23/12/2020 5:29:21 p.m. - Writing IMEI start
23/12/2020 5:29:21 p.m. - Reading from DataBase...
23/12/2020 5:29:21 p.m. - Read from DataBase success!
23/12/2020 5:29:21 p.m. - Write IMEI success!
23/12/2020 5:29:21 p.m. - Writing Vendor and Country...
23/12/2020 5:29:21 p.m. - Read from DataBase ...
23/12/2020 5:29:21 p.m. - Read from DataBase not supported for this model, skipped!!
23/12/2020 5:29:21 p.m. - Writing device model...
23/12/2020 5:29:21 p.m. - Read from DataBase...
23/12/2020 5:29:21 p.m. - Read from DataBase Fail!
23/12/2020 5:29:21 p.m. - Write device model not supported for this model, skipped!!!
23/12/2020 5:29:21 p.m. - Write SIMCARD mode not supported for this model, skipped!
23/12/2020 5:29:21 p.m. - Synchronize NV...
23/12/2020 5:29:21 p.m. - Synchronize NV success!
23/12/2020 5:29:21 p.m. - Factory reset...
23/12/2020 5:29:21 p.m. - Factory reset success!
23/12/2020 5:29:21 p.m. - Finished!

23/12/2020 5:29:22 p.m. - Reset phone to factory default to complete operation. If reset failed.
23/12/2020 5:29:22 p.m. - For Change vendor id and country Use NVreconstructor and repeat operation.
23/12/2020 5:29:22 p.m. - For repair Fingerprints Use NVrecontructor Special button or Write NV
 

DTPRO Tool

Product Manager
Sep 3, 2018
4,568
4,056
Skype
nico_2202
please how to repair imei huawei y6 with picture ??
1 enable DBA port and Use QCOMM Module for repair IMEI
2 Write Xloader or Board Software with DTI and repair IMEI using QCOMM Module


please always post complete Model -
If you need Help contact to our assistant - WhatsApp +573046501469
 
Last edited:
  • Like
Reactions: Ahmed_Dooha
Top