Huawei Y7p
ART-L29
Job ID: 000000000190D0AB
2025-11-30 07:35:23
Starting Reset FRP
Selected phone model: ART-TL00X
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: DUJ6R20109002162
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: ART-L29
System: ARTH-L29 10.1.0.227(C185E2R3P1)
Android Version: 10
Base Version: ART-LGRP2-OVS 10.1.0.227
Custom Version: ARTH-L29-CUST 10.1.0.2(C185)
Preload Version: ARTH-L29-PRELOAD 10.1.0.1(C185R3)
C_Version: C185
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 3 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: ART-L29
System: ARTH-L29 10.1.0.227(C185E2R3P1)
Resetting FRP...
Writing FRP partition..
Rebooting device...
Reset FRP done.
Performed by 1.3.5.4 Software version.
Error: Failed to handshake (3) the remote service
2025-11-30 07:40:47
Starting Reset Huawei ID
Selected phone model: ART-TL00X
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: DUJ6R20109002162
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: ART-L29
System: ARTH-L29 10.1.0.227(C185E2R3P1)
Android Version: 10
Base Version: ART-LGRP2-OVS 10.1.0.227
Custom Version: ARTH-L29-CUST 10.1.0.2(C185)
Preload Version: ARTH-L29-PRELOAD 10.1.0.1(C185R3)
C_Version: C185
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 3 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: ART-L29
System: ARTH-L29 10.1.0.227(C185E2R3P1)
Resetting Huawei ID...
Rebooting device...
Warning: Please perform "Clear data" manually via Recovery Mode, if your device doesn`t start properly!
Reset Huawei ID done.
Performed by 1.3.5.4 Software version.
ART-L29
Job ID: 000000000190D0AB
2025-11-30 07:35:23
Starting Reset FRP
Selected phone model: ART-TL00X
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: DUJ6R20109002162
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: ART-L29
System: ARTH-L29 10.1.0.227(C185E2R3P1)
Android Version: 10
Base Version: ART-LGRP2-OVS 10.1.0.227
Custom Version: ARTH-L29-CUST 10.1.0.2(C185)
Preload Version: ARTH-L29-PRELOAD 10.1.0.1(C185R3)
C_Version: C185
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 3 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: ART-L29
System: ARTH-L29 10.1.0.227(C185E2R3P1)
Resetting FRP...
Writing FRP partition..
Rebooting device...
Reset FRP done.
Performed by 1.3.5.4 Software version.
Error: Failed to handshake (3) the remote service
2025-11-30 07:40:47
Starting Reset Huawei ID
Selected phone model: ART-TL00X
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: DUJ6R20109002162
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: ART-L29
System: ARTH-L29 10.1.0.227(C185E2R3P1)
Android Version: 10
Base Version: ART-LGRP2-OVS 10.1.0.227
Custom Version: ARTH-L29-CUST 10.1.0.2(C185)
Preload Version: ARTH-L29-PRELOAD 10.1.0.1(C185R3)
C_Version: C185
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 3 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: ART-L29
System: ARTH-L29 10.1.0.227(C185E2R3P1)
Resetting Huawei ID...
Rebooting device...
Warning: Please perform "Clear data" manually via Recovery Mode, if your device doesn`t start properly!
Reset Huawei ID done.
Performed by 1.3.5.4 Software version.