New I NEED OPPO F3 ISP

[iory25]

i have oppo f3 when power it , go to recovery, and i cant flash it , blocked at write recovery in the first step, anyone have isp (emmc pinout) help me to solve it

 

[iory25]

log when flash it error

AUTH info: , version: 0
Firmware package: CPH1609EX_11_A.23_180606
BROM version[1]: 7.1703.5.0
Loading DA: MTK_AllInOne_DAA[0].bin (750.62 KiB)
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done.
Detected MediaTek USB Port (COM251)
Connection status: UHCI:HUB:USB 1.16 Full-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2016
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6750, Hw ver: 0xCB00, Sw ver: 0x0001
Secure ver: 0x00, BL ver: 0x00
Secure config: 0x00
SRAM size: 256 KiB
DRAM size: 2 GiB
ME ID: dc6eca2a3a721b31928936b7be043e33
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: RH64MB (0x524836344d42), rev: 0x05, serial number: 0xB22F97F9
Manufacturing date: févr. 2017
CID: 15010052 4836344D 4205B22F 97F92459
Capacity: 58.25 GiB(62,549,655,552 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
USB speed: Full-Speed
Switching to USB High-Speed...
Scanning DA USB High-Speed port... Done.
Detected MediaTek DA USB VCOM (Android) (COM239)
Connection status: EHCI:HUB:USB 1.16 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2016

Verifying SoC: passed
Verifying CID: passed
Erasing recovery [0x00008000-0x0128C3FF]... Error: 0xC0050009 (STATUS_FORMAT_EXCEPTION)
total_blocks: 0
bad_blocks: 0
err_blocks: 0

or

AUTH info: , version: 0
Firmware package: CPH1609EX_11_A.23_180606
BROM version[1]: 7.1703.5.0
Loading DA: MTK_AllInOne_DAA[0].bin (750.62 KiB)
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done.
Detected MediaTek USB Port (COM251)
Connection status: UHCI:HUB:USB 1.16 Full-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2016
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6750, Hw ver: 0xCB00, Sw ver: 0x0001
Secure ver: 0x00, BL ver: 0x00
Secure config: 0x00
SRAM size: 256 KiB
DRAM size: 2 GiB
ME ID: dc6eca2a3a721b31928936b7be043e33
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: RH64MB (0x524836344d42), rev: 0x05, serial number: 0xB22F97F9
Manufacturing date: févr. 2017
CID: 15010052 4836344D 4205B22F 97F92459
Capacity: 58.25 GiB(62,549,655,552 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
USB speed: Full-Speed
Switching to USB High-Speed...
Scanning DA USB High-Speed port... Done.
Detected MediaTek DA USB VCOM (Android) (COM239)
Connection status: EHCI:HUB:USB 1.16 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2016

Verifying SoC: passed
Verifying CID: passed
Writing preloader, size: 183.68 KiB
Error: 0xC0050003 (STATUS_DOWNLOAD_EXCEPTION)

 

[Madgoeslim]

Hello,

From the log above, it seems like the storage can't be erase or format in recovery partition, also can't be write in boot 1 area for preloader.
I don't think ISP is exist for this device. The DA agent is valid so you can flash via USB protocol.
At first, please make Full Backup of this device. So, you have save NV partition, because this device use sign imei, without backup not possible to repair.
After that, do Full Erase, and followed by standart flashing procedure.

If you still face error in writing firmware, means the storage might be damage.
You can check it via chip off methode if possible.