If You Have Any Problem Using Box Or Any Problem Recover Set Post Here

martin1945

Junior Member
Jul 2, 2019
1
0
I want to flash nokia 6.1 plus, TA-1116, but I get this error


Firmware package: DRG-354h-0-00WW-B01 Processing fastboot flashing on Fastboot Device[DRGGAM5883008467] Flashing in progress. Do not turn off the device !!! fastboot capability: 0.0 model: DGW sub_model: none software version: DRG-351F-0-00WW-B04 SW model: 00WW build number: B04 hardware version: 3.0 RF band id: G_850_900_1800_1900W_1_2_5_8L_1_3_5_7_8_28_38_ security version: 4 project code: DRG1 product: fih_sdm660_64 product id: DRGGAM5883008467 sutinfo: PID bootloader type: service battery capacity: 40 SKUID: 600WW Performing authentication for root access... [SERVER] Service unavailable: Internal error 1! Fastboot flashing completed in 0.777 s
 

tedtmobile

Member
Aug 15, 2019
5
0
REDMI 6A TRY TO REMOVE MI ACCOUNT 3 CRIDE CUT MI ACOUNT REMOVED DOND SHOW BUT STILL MI ACCOUNT ACTIVE NEED HELP
 

mustafa_thora

Member
Mar 14, 2017
6
5
islamabad
meizu repair imei but continuously give this message

Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Using Port:
AUTH info: MEIZU, version: 0
Boot META MODE...
Hold the VOL DOWN to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] MediaTek USB Port (COM338)
Connection status: UHCI:HUB:USB 1.10 Full-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2016
Boot META MODE from BootROM ... Error: service [MEIZU_FL] is offline now, please check back later.
error 116
 

ayubalikhan

Junior Member
Sep 4, 2019
4
0
vivo v15 pro after format dead
onnection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-2341
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: 3V6CMB (0x335636434d42), rev: 0x02, serial number: 0xA9246A06
Manufacturing date: Mar 2019
CID: 15010033 5636434D 4202A924 6A0636D6
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 116.48 GiB(125,069,950,976 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KM3V6000CM-BXXX/128G
 

ayubalikhan

Junior Member
Sep 4, 2019
4
0
now giving me this error
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
 

Denny F

Junior Member
Oct 23, 2019
2
0
Failed write qcn by ufi windows 7 64 bit assertion failed .i already by cmd bcdedit..no succses..by net framework nothing too..by aio runtime v2.4.8 nothing happen too.please help me.7592