If You Have Any Problem Using Box Or Any Problem Recover Set Post Here

ashaqkulgam

Active Member
 : Jan 28, 2020
 : 23
 : 10
Sir i am new in this section please help me i try to realme rmx1805 to reset its pattern lock with ufi accentdantly i fectory erase emmc not mobile dead in 9008 port please tell me what to do now
 

reza200222

Junior Member
 : Feb 2, 2020
 : 1
 : 0
hi
i do flash Redmi 6a with Auth CRDT

flash error and lose CRDT


Connecting Bootrom...
[SERVER] XIAOMI_FL [cactus_ru,500c6cbb8882397c] cost: 0, retry: 3, your balance: 4
Sending Download Agent...
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0x00, BL ver: 0x00
Secure config: 0x00
SRAM size: 256 KiB
DRAM size: 512 MiB
SOC ID: 500c6cbb8882397c89d3b027fcfdaf91fa386236b70f111611462eb94e272e90
ME ID: 0c5ca10bb53577ef11ad0fe6c8a700da
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: QD63MB (0x514436334d42), rev: 0x01, serial number: 0x6DB4E4DF
Manufacturing date: Oct 2018
CID: 15010051 4436334D 42016DB4 E4DFA521
Capacity: 29.14 GiB(31,293,702,144 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB (key exist)
User area: 29.12 GiB(31,268,536,320 bytes)
USB speed: High-Speed
Verifying SoC: passed
Verifying CID: passed
Writing recovery, size: 64 MiB
Error: -1073414141 (STATUS_DOWNLOAD_EXCEPTION)
Error while flashing images at 0x00000000 !!!
 

IMRAN BAGBAN

Senior Member
 : Oct 4, 2018
 : 65
 : 80
Skype
 :  786
UTH info: MTK, version: 1
BROM version[1]: 7.1917.3.0
DownloadAgent: MTK_AllInOne_DA.bin
hash: e3960c2be7627956e03c11dd24ee726da8ffb92b, size: 13.37 MiB
version: 3.3001.2019-04-22020/02/04 00:37:35, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] MediaTek USB Port (COM5)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2016
Connecting Bootrom...
[SERVER] XIAOMI_FL [cactus,aeaa0805c9a0fec0] ref id: XF04597493563, cost: 3, your balance: 4
Sending Download Agent...
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Secure config: 0x00
Error: -1073348605 (STATUS_BROM_CMD_SEND_DA_FAIL)
[H/W] Fail to download DA to baseband chip's internal SRAM!
There's a cable communication problem or target might be shutdown unexpectedly or target lost power supply
Error: -1073348605 (STATUS_BROM_CMD_SEND_DA_FAIL)
send DA data error. code 0x7024
(boot_rom.cpp, line:328)
You have used 1 available XIAOMI_FL slot for this phone, you have 2 FREE slot left to try again in case this task fails.
You may retry the task for more times without further authorization as long as you don't unplug the USB cable, change brand or model selection or close the application.
 

sali1

Junior Member
 : Sep 18, 2018
 : 4
 : 0
HI

I can't download any firmware from the box support. It keep throwing "Error 402". I've tried restarting the UFI software and also tried different internet connections.
Any Idea how to fix this?

10337
 

Rootcom676

Member
 : Feb 7, 2020
 : 8
 : 0
Hi. I am new to using my UFI box. Can someone help me please. I am factory resetting Oppo AX5 Cph1851. Which ISP pinout do I use for this model? Thank you in advance.
 

voron333

Junior Member
 : Dec 22, 2019
 : 2
 : 0
When flashing Meizu 16x (M1872) to remove the phone code, I get this error:

Model: [Meizu] M1872(16X)
overview:
- Flashing, erase frp, erase userdata supported
for Exynos platform, go to \\FLASH:FASTBOOT
for Qualcomm platform, go to \\FLASH:QUALCOMM
for MediaTek platform, go to \\FLASH:MEDIATEK
- Flashing requires bootloader authorization by server
- Unlock bootloader supported for some Qualcomm and Exynos devices via \\FASTBOOT:SpecialTask
- Any Bootloader authorization will consume credit, use it with caution at your own risk !!!
- To avoid any toubles, please always use official firmware !!!
- Flashing requires server authentication and UFI CREDIT, goto \\ACCOUNT for the list of services and costs
!!! WARNING !!!
- Authorization should only be used for normal flashing with official firmware that match to your model
- Special Tasks are bonus feature, if it fails you can not claim a refund
Reset Flyme Account Lock was released for old models, it will not work for new model.
Any Special Tasks in MediaTek platform require write access and will not work for this model due to secure boot.
- Service cost for [Meizu] M1872:
MEIZU_FL(Bootloader Authorization(QC, MTK, EXYNOS) - Including Identify, Flashing, SpecialTask): 5 credits
MEIZU_UBL(Unlock Bootloader(QC, EXYNOS [Private testing phase])): 10 credits
Do not rename the phone model directory !
Every Special Tasks will needs to use Bootloader Authorization, you pay for authorization not the specific task !!!
You have to select the CORRECT firmware that match your phone model before Identify!!!
--------------------
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM8)
Connection status: RUSB3HUB:RUSB3HUB:USB 2.00 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.7, date: 8-2-2017
Initializing...
MSM Serial number: 0xe0739e73
MSM HW ID: 0x000db0e1 (SDM710)
OEM Public Key Hash: 0xcd55540dcb175cc80762cebf08fafd1232c75d13fd06444048ae94bc94a6132d
SBL SW version: 0
Firehose: prog_firehose_ddr.elf
hash: d58a416cd5aeacb9277703ba566e65a14c716a8b, size: 701.66 KiB
QC_IMAGE_VERSION: BOOT.XF.2.1-00092-SDM710LZB-1
IMAGE_VARIANT: SDM670LA
OEM_IMAGE_VERSION: Mz-Builder-l7
Sending firehose loader... Done
Handshaking...
RF id: 0x2
Secure boot: on
Lock state: locked
PSN: 872HZ6164E00A79A
[SERVER] MEIZU_FL [M1872,e0739e73] ref id: MF02201362658, cost: 5, your balance: 11
Sending ping... Done
INFO: Binary build date: Oct 11 2018 17:52:05
INFO: Chip serial num: 3765673587 (0xe0739e73)
Sending configurations...
MemoryName: UFS
DateTime: Oct 11 2018 - 17:52:05
Version: 1
Firehose configured.
Storage type: UFS
ERROR: Failed to initialize (open whole lun) UFS Device slot 0 partition 0
ERROR: Failed to open the device:3 slot:0 partition:0 error:0
ERROR: OPEN handle NULL and no error, weird 344561188
ERROR: Failed to open device, type:UFS, slot:0, lun:0 error:3
Processing rawprogram_unsparse0.xml
Writing PrimaryGPT at 0x00000000 (5 sectors)... failed
You have used 1 available MEIZU_FL slot for this phone, you have 2 FREE slot left to try again in case this task fails.
You may retry the task for more times without further authorization as long as you don't unplug the USB cable.

I tried it several times, please return the spent 5 credits. Thanks.
 

Ahmadaim1

Product Supporter
 : Aug 10, 2018
 : 195
 : 100
 :  Nigeria
When flashing Meizu 16x (M1872) to remove the phone code, I get this error:

Model: [Meizu] M1872(16X)
overview:
- Flashing, erase frp, erase userdata supported
for Exynos platform, go to \\FLASH:FASTBOOT
for Qualcomm platform, go to \\FLASH:QUALCOMM
for MediaTek platform, go to \\FLASH:MEDIATEK
  • Flashing requires bootloader authorization by server
  • Unlock bootloader supported for some Qualcomm and Exynos devices via \\FASTBOOT:SpecialTask
  • Any Bootloader authorization will consume credit, use it with caution at your own risk !!!
  • To avoid any toubles, please always use official firmware !!!
  • Flashing requires server authentication and UFI CREDIT, goto \\ACCOUNT for the list of services and costs
!!! WARNING !!!
  • Authorization should only be used for normal flashing with official firmware that match to your model
  • Special Tasks are bonus feature, if it fails you can not claim a refund
Reset Flyme Account Lock was released for old models, it will not work for new model.
Any Special Tasks in MediaTek platform require write access and will not work for this model due to secure boot.
- Service cost for [Meizu] M1872:
MEIZU_FL(Bootloader Authorization(QC, MTK, EXYNOS) - Including Identify, Flashing, SpecialTask): 5 credits
MEIZU_UBL(Unlock Bootloader(QC, EXYNOS [Private testing phase])): 10 credits
Do not rename the phone model directory !
Every Special Tasks will needs to use Bootloader Authorization, you pay for authorization not the specific task !!!
You have to select the CORRECT firmware that match your phone model before Identify!!!
--------------------
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM8)
Connection status: RUSB3HUB:RUSB3HUB:USB 2.00 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.7, date: 8-2-2017
Initializing...
MSM Serial number: 0xe0739e73
MSM HW ID: 0x000db0e1 (SDM710)
OEM Public Key Hash: 0xcd55540dcb175cc80762cebf08fafd1232c75d13fd06444048ae94bc94a6132d
SBL SW version: 0
Firehose: prog_firehose_ddr.elf
hash: d58a416cd5aeacb9277703ba566e65a14c716a8b, size: 701.66 KiB
QC_IMAGE_VERSION: BOOT.XF.2.1-00092-SDM710LZB-1
IMAGE_VARIANT: SDM670LA
OEM_IMAGE_VERSION: Mz-Builder-l7
Sending firehose loader... Done
Handshaking...
RF id: 0x2
Secure boot: on
Lock state: locked
PSN: 872HZ6164E00A79A
[SERVER] MEIZU_FL [M1872,e0739e73] ref id: MF02201362658, cost: 5, your balance: 11
Sending ping... Done
INFO: Binary build date: Oct 11 2018 17:52:05
INFO: Chip serial num: 3765673587 (0xe0739e73)
Sending configurations...
MemoryName: UFS
DateTime: Oct 11 2018 - 17:52:05
Version: 1
Firehose configured.
Storage type: UFS
ERROR: Failed to initialize (open whole lun) UFS Device slot 0 partition 0
ERROR: Failed to open the device:3 slot:0 partition:0 error:0
ERROR: OPEN handle NULL and no error, weird 344561188
ERROR: Failed to open device, type:UFS, slot:0, lun:0 error:3
Processing rawprogram_unsparse0.xml
Writing PrimaryGPT at 0x00000000 (5 sectors)... failed
You have used 1 available MEIZU_FL slot for this phone, you have 2 FREE slot left to try again in case this task fails.
You may retry the task for more times without further authorization as long as you don't unplug the USB cable.

I tried it several times, please return the spent 5 credits. Thanks.
Try firehouse loader from signed firmware
 
Reactions: bavi_gsm

pikinetelephone

Junior Member
 : Jan 15, 2020
 : 4
 : 0
hello every body
since i have my ufi boxe only once time i have use server credit to unlock a xiaomi phone since that server never work here and i have many job to do cant you help me please ?