How to..,
1. Connect the RP2350 Hardware Pwner to the PC.
2. Put the iPhone or iPad into DFU Mode.
3. Connect the device to the RP2350 USB-A port.
4. Reconnect the RP2350 board to start the pwn process.
5. Connect the device to PC with a normal cable (Device Pwned).
6. Open EFT Pro → Apple › Ramdisk › OneClick › Boot Passcode/Hello iOS 11.x – 26.x One Click → press Start.
7. Follow the EFT Pro log steps guide.
8. Select Backup to save the Ramdisk-mode data.
9. Erase Device.
10. Select Restore to restore a previously created backup.
Activate first ur USBLITER8, i use RP2350 USB-A waveshare
USBLITER8 is now activated
problem of phone IPHONE UNAVAILABLE
now put in dfu mode
then open EFT Pro → Apple › Ramdisk › OneClick › Boot Passcode/Hello iOS 11.x – 26.x One Click → press Start.
i select mehod 1
backup passcode
erase all content setting
after erase all content setting, repeat in method1
then restore backup passcode
disable update reset & skip setup
done
usbliter8 firmware link
link1
link2
1. Connect the RP2350 Hardware Pwner to the PC.
2. Put the iPhone or iPad into DFU Mode.
3. Connect the device to the RP2350 USB-A port.
4. Reconnect the RP2350 board to start the pwn process.
5. Connect the device to PC with a normal cable (Device Pwned).
6. Open EFT Pro → Apple › Ramdisk › OneClick › Boot Passcode/Hello iOS 11.x – 26.x One Click → press Start.
7. Follow the EFT Pro log steps guide.
8. Select Backup to save the Ramdisk-mode data.
9. Erase Device.
10. Select Restore to restore a previously created backup.
Activate first ur USBLITER8, i use RP2350 USB-A waveshare
USBLITER8 is now activated
problem of phone IPHONE UNAVAILABLE
now put in dfu mode
then open EFT Pro → Apple › Ramdisk › OneClick › Boot Passcode/Hello iOS 11.x – 26.x One Click → press Start.
i select mehod 1
backup passcode
erase all content setting
after erase all content setting, repeat in method1
then restore backup passcode
disable update reset & skip setup
done
usbliter8 firmware link
link1
link2