Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : W5001P-F3102-8.1-OP-V071-20210319
Ver. Incmt : OP-V071-20210319
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2021-03-05
Build Time : 19.03.2021
Product Model : itel W5001P
Product Brand : Itel
Product Name : F3102
Product Device : itel-W5001P
Product Manfct : itel
Product Info : F3102
Product Board : itel-W5001P
Board Platform : sp7731e
Platform Version: MOCORTM_17C_W18.31.2_P27_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.31.2_P27
HW Version: sc7731e_modem
CMP_Time : 01-16-2020 20:28:37
MODEM TAG : MOCORTM_17C_W18.31.2_P27_Debug_FM_BASE_17C_W18.31.2_P27_sc7731e_modem_pike2_pub
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:42
FRP Information
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : W5001P-F3102-8.1-OP-V071-20210319
Ver. Incmt : OP-V071-20210319
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2021-03-05
Build Time : 19.03.2021
Product Model : itel W5001P
Product Brand : Itel
Product Name : F3102
Product Device : itel-W5001P
Product Manfct : itel
Product Info : F3102
Product Board : itel-W5001P
Board Platform : sp7731e
Platform Version: MOCORTM_17C_W18.31.2_P27_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.31.2_P27
HW Version: sc7731e_modem
CMP_Time : 01-16-2020 20:28:37
MODEM TAG : MOCORTM_17C_W18.31.2_P27_Debug_FM_BASE_17C_W18.31.2_P27_sc7731e_modem_pike2_pub
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:42
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : W5001P-F3102-8.1-OP-V071-20210319
Ver. Incmt : OP-V071-20210319
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2021-03-05
Build Time : 19.03.2021
Product Model : itel W5001P
Product Brand : Itel
Product Name : F3102
Product Device : itel-W5001P
Product Manfct : itel
Product Info : F3102
Product Board : itel-W5001P
Board Platform : sp7731e
Platform Version: MOCORTM_17C_W18.31.2_P27_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.31.2_P27
HW Version: sc7731e_modem
CMP_Time : 01-16-2020 20:28:37
MODEM TAG : MOCORTM_17C_W18.31.2_P27_Debug_FM_BASE_17C_W18.31.2_P27_sc7731e_modem_pike2_pub
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:42
FRP Information
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : W5001P-F3102-8.1-OP-V071-20210319
Ver. Incmt : OP-V071-20210319
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2021-03-05
Build Time : 19.03.2021
Product Model : itel W5001P
Product Brand : Itel
Product Name : F3102
Product Device : itel-W5001P
Product Manfct : itel
Product Info : F3102
Product Board : itel-W5001P
Board Platform : sp7731e
Platform Version: MOCORTM_17C_W18.31.2_P27_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.31.2_P27
HW Version: sc7731e_modem
CMP_Time : 01-16-2020 20:28:37
MODEM TAG : MOCORTM_17C_W18.31.2_P27_Debug_FM_BASE_17C_W18.31.2_P27_sc7731e_modem_pike2_pub
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:42