J100H Boot repair got error

[mehedihassan]

Failed to initialize eMMC (return code: 0, CMD Error: ) !!!
CMD0 error, cmd response: 0x0, card state: 0 (Card is in unknown state)
GO_IDLE_STATE command failed.
Failed to initialize eMMC (return code: 0, CMD Error: ) !!!
CMD0 error, cmd response: 0x0, card state: 0 (Card is in unknown state)
GO_IDLE_STATE command failed.
Failed to initialize eMMC (return code: 0, CMD Error: ) !!!
CMD0 error, cmd response: 0x0, card state: 0 (Card is in unknown state)
GO_IDLE_STATE command failed.

after Erase Then that error gone
but when i write then i face another error

 

[Madgoeslim]

Failed to initialize eMMC (return code: 0, CMD Error: ) !!!
CMD0 error, cmd response: 0x0, card state: 0 (Card is in unknown state)
GO_IDLE_STATE command failed.
Failed to initialize eMMC (return code: 0, CMD Error: ) !!!
CMD0 error, cmd response: 0x0, card state: 0 (Card is in unknown state)
GO_IDLE_STATE command failed.
Failed to initialize eMMC (return code: 0, CMD Error: ) !!!
CMD0 error, cmd response: 0x0, card state: 0 (Card is in unknown state)
GO_IDLE_STATE command failed.

after Erase Then that error gone
but when i write then i face another error

Hello,
Try checking the smart report, and do the Nand Test before doing the writing process.
If needed, for emcp Hynix, you can do repartitioning too.

Please login to view image

If there is still an error , then the emcp does need to be replaced.

GudLuck

 

[mehedihassan]

Problem solved

 

[mehedihassan]

Connection status: XHCI:HUB3:HUB3:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-3531
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G2b (0x483447326211), rev: 0x01, serial number: 0x45F8CCB8
Manufacturing date: Mar 2015
CID: 90014A48 34473262 110145F8 CCB832E8
CSD: D07F0132 0F5903FF FFFFFFEF 8A4040DA
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)

Current partition access:
Access to boot partition 1
Loading file: "\\%BACKUPS%\Samsung\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\boot1.bin", size: 4 MiB...
Writing boot1 (8192 sectors)... Done in 9.152 s
Current partition access:
Access to boot partition 2
Loading file: "\\%BACKUPS%\Samsung\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\boot2.bin", size: 4 MiB...
Writing boot2 (8192 sectors)... Done in 9.322 s
Current partition access:
Access to replay-protected memory block (RPMB)
Loading file: "\\%BACKUPS%\Samsung\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\rpmb.bin", size: 4 MiB...
Writing rpmb (8192 sectors)... Done in 8.606 s
Current partition access:
Access to user area
Loading file: "\\%BACKUPS%\Samsung\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\userarea_256MiB.bin", size: 256 MiB...
Writing userarea (524288 sectors)... Done in 9 mins 27.631 s
Loading file: "\\%BACKUPS%\Samsung\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\SM-J100H(KTU84P.J100HXXS0API6-4.4.4-KTU84P)[H4G2b]\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Done.
Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.

 

[sujan dey]

Problem solved

plz help me sir, i need this solution ican,t solve this pblem
plz sir help me