- Jun 10, 2019
- 1,770
- 1,345
Jio Bharat V3 4G JBV191M1 Flash File and Tool
BOOT KEY
Step-by-Step Flashing Guide
- Charge your phone – Make sure your Jio Bharat V3 has at least 50% battery. A low battery can interrupt the process or prevent the phone from being detected.
- Run the flash tool as administrator – Right-click the tool and select Run as administrator. This is the official tool provided by Jiobharat, and it’s completely free.
- Load the firmware – In the tool, load the .pac file you extracted earlier.
- Click the Play button – Once you hit Play (the green triangle icon), the tool will start waiting for your device to connect.
- Connect your phone – Power off your phone completely. Then hold the Option and Call buttons together while connecting the USB cable to your PC.
- Install SPD Drivers ( if needed ) – If it’s your first time flashing, the tool might not detect the device. Just install the SPD drivers included in the package.
- Check Device Manager – You should see SPD Diag Port under Ports. That means the connection is successful and the flashing has started.
Download Link
- Jio Bharat V3 4G JBV191M1: - Download Link
If you find my post helpful, press like button✌