phone is dead condition. when i write system file show error rest if the write done.. reprogram emmc but same error. NEED SOLUTION
LOG
Connection status: EHCI:HUB:HUB[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-7943
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x45 (SanDisk)
Product name: DF4064 (0x444634303634), rev: 0x01, serial number: 0x2BE9DF5A
Manufacturing date: May 2017
CID: 45010044 46343036 34012BE9 DF5A545E
CSD: D00F0032 8F5903FF FFFFFFEF 8A404022
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 4270]
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 4 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
crypto state: encrypted?
Selected: [SanDisk] SDINADF4-64G (BGA153)
HEALTH REPORT
Connection status: EHCI:HUB:HUB[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-7943
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... CLK not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x45 (SanDisk)
Product name: DF4064 (0x444634303634), rev: 0x01, serial number: 0x2BE9DF5A
Manufacturing date: May 2017
CID: 45010044 46343036 34012BE9 DF5A545E
CSD: D00F0032 8F5903FF FFFFFFEF 8A404022
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 4270]
User area: 58.24 GiB(62,537,072,640 bytes)
eMMC 5.x Health report:
Device lifetime: Normal
Estimation of the device lifetime (SLC): 10% - 20% device life time used
Estimation of the device lifetime (MLC): 10% - 20% device life time used
Sandisk eMMC5.x Smart report:
Curr State: 3 (HANDLING: Preloading finished, now performing relocations)
Max MLC Percent: 33 Implicit Default: 1
Preloading Mode: 3
Max MLC Sectors: 40307096
Max MLC In Implicit: 40307096
Configured Sectors: 0
Sectors Done: 0
MLC Sectors Done: 0
MLC Percent Done: 0 Unhandled Sectors: 0
ERROR
Connection status: EHCI:HUB:HUB[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-7943
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... CLK not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x45 (SanDisk)
Product name: DF4064 (0x444634303634), rev: 0x01, serial number: 0x2BE9DF5A
Manufacturing date: May 2017
CID: 45010044 46343036 34012BE9 DF5A545E
CSD: D00F0032 8F5903FF FFFFFFEF 8A404022
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 4270]
User area: 58.24 GiB(62,537,072,640 bytes)
Current partition access:
Access to boot partition 1
Writing preloader at 0x00000000 (403 sectors)... Done in 0.082 s
Setting boot partition config to 0x48... Done
Current partition access:
Access to user area
Processing file: "recovery.img"...
Writing recovery at 0x00008000 (29200 sectors)... Done in 5.690 s
Processing file: "md1img.img"...
Writing md1img at 0x08500000 (35349 sectors)... Done in 6.886 s
Processing file: "md1dsp.img"...
Writing md1dsp at 0x09D00000 (1989 sectors)... Done in 0.390 s
Processing file: "md1arm7.img"...
Writing md1arm7 at 0x0A100000 (9 sectors)... Done in 0.003 s
Processing file: "scp.img"...
Writing scp1 at 0x0A900000 (99 sectors)... Done in 0.020 s
Processing file: "scp.img"...
Writing scp2 at 0x0AA00000 (99 sectors)... Done in 0.019 s
Processing file: "lk.img"...
Writing lk at 0x0B000000 (829 sectors)... Done in 0.162 s
Processing file: "lk.img"...
Writing lk2 at 0x0B100000 (829 sectors)... Done in 0.162 s
Processing file: "boot.img"...
Writing boot at 0x0B200000 (21100 sectors)... Done in 4.127 s
Processing file: "logo.bin"...
Writing logo at 0x0C200000 (5746 sectors)... Done in 1.126 s
Processing file: "tee.img"...
Writing tee1 at 0x0CA00000 (477 sectors)... Done in 0.094 s
Processing file: "tee.img"...
Writing tee2 at 0x0CF00000 (477 sectors)... Done in 0.093 s
Processing file: "efuse.img"...
Writing efuse at 0x0D400000 (1 sectors)... Done in 0.002 s
Processing file: "system.img"...
Writing sparse image system at 0x0E000000 (13631488 sectors)... Wrote 27132 blocks, expected to write 1703936 blocks
LOG
Connection status: EHCI:HUB:HUB[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-7943
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x45 (SanDisk)
Product name: DF4064 (0x444634303634), rev: 0x01, serial number: 0x2BE9DF5A
Manufacturing date: May 2017
CID: 45010044 46343036 34012BE9 DF5A545E
CSD: D00F0032 8F5903FF FFFFFFEF 8A404022
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 4270]
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 4 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
crypto state: encrypted?
Selected: [SanDisk] SDINADF4-64G (BGA153)
HEALTH REPORT
Connection status: EHCI:HUB:HUB[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-7943
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... CLK not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x45 (SanDisk)
Product name: DF4064 (0x444634303634), rev: 0x01, serial number: 0x2BE9DF5A
Manufacturing date: May 2017
CID: 45010044 46343036 34012BE9 DF5A545E
CSD: D00F0032 8F5903FF FFFFFFEF 8A404022
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 4270]
User area: 58.24 GiB(62,537,072,640 bytes)
eMMC 5.x Health report:
Device lifetime: Normal
Estimation of the device lifetime (SLC): 10% - 20% device life time used
Estimation of the device lifetime (MLC): 10% - 20% device life time used
Sandisk eMMC5.x Smart report:
Curr State: 3 (HANDLING: Preloading finished, now performing relocations)
Max MLC Percent: 33 Implicit Default: 1
Preloading Mode: 3
Max MLC Sectors: 40307096
Max MLC In Implicit: 40307096
Configured Sectors: 0
Sectors Done: 0
MLC Sectors Done: 0
MLC Percent Done: 0 Unhandled Sectors: 0
ERROR
Connection status: EHCI:HUB:HUB[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-7943
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... CLK not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x45 (SanDisk)
Product name: DF4064 (0x444634303634), rev: 0x01, serial number: 0x2BE9DF5A
Manufacturing date: May 2017
CID: 45010044 46343036 34012BE9 DF5A545E
CSD: D00F0032 8F5903FF FFFFFFEF 8A404022
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 4270]
User area: 58.24 GiB(62,537,072,640 bytes)
Current partition access:
Access to boot partition 1
Writing preloader at 0x00000000 (403 sectors)... Done in 0.082 s
Setting boot partition config to 0x48... Done
Current partition access:
Access to user area
Processing file: "recovery.img"...
Writing recovery at 0x00008000 (29200 sectors)... Done in 5.690 s
Processing file: "md1img.img"...
Writing md1img at 0x08500000 (35349 sectors)... Done in 6.886 s
Processing file: "md1dsp.img"...
Writing md1dsp at 0x09D00000 (1989 sectors)... Done in 0.390 s
Processing file: "md1arm7.img"...
Writing md1arm7 at 0x0A100000 (9 sectors)... Done in 0.003 s
Processing file: "scp.img"...
Writing scp1 at 0x0A900000 (99 sectors)... Done in 0.020 s
Processing file: "scp.img"...
Writing scp2 at 0x0AA00000 (99 sectors)... Done in 0.019 s
Processing file: "lk.img"...
Writing lk at 0x0B000000 (829 sectors)... Done in 0.162 s
Processing file: "lk.img"...
Writing lk2 at 0x0B100000 (829 sectors)... Done in 0.162 s
Processing file: "boot.img"...
Writing boot at 0x0B200000 (21100 sectors)... Done in 4.127 s
Processing file: "logo.bin"...
Writing logo at 0x0C200000 (5746 sectors)... Done in 1.126 s
Processing file: "tee.img"...
Writing tee1 at 0x0CA00000 (477 sectors)... Done in 0.094 s
Processing file: "tee.img"...
Writing tee2 at 0x0CF00000 (477 sectors)... Done in 0.093 s
Processing file: "efuse.img"...
Writing efuse at 0x0D400000 (1 sectors)... Done in 0.002 s
Processing file: "system.img"...
Writing sparse image system at 0x0E000000 (13631488 sectors)... Wrote 27132 blocks, expected to write 1703936 blocks
Last edited: