Lg ms323 dead boot repair done with medusa pro

[maanarman]

Welcome to Medusa Pro Software version 1.3.0. Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: FT SCR2000 0
Reader #3: FT SCR2000 1


Please disconnect battery and USB cable.






Model Settings:
Interface : eMMC
Brand : LG
Model : MS323
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_MS323_EMMC.SRF
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto


Connecting...
Device : Hynix eMMC H4G1d
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info


CID : 90014A4834473164040501A1C5334133
Manufacturer ID : 0X90
Device/BGA : BGA(Discrete embeded)
OEM/Application ID : 0X4A
Product name : H4G1d
Product revision : 0.5
Product serial number : (hex)1A1C533
Manufacturing date : 04/2014
---------------------------------------------------------------
CSD Info


CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info


Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Boot partition enable : Device not boot enabled (default)


Partition config : 00000000
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G1d_26_01_2017_19_24_46.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.0; FW: 1.15.
Erasing. Please wait... Done.
SW: 1.3.0; FW: 1.15.
Reapairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/LG_MS323_EMMC.SRF".
Write data verification is enabled.


Switched to user area.
Writting GPT partition... Done.
Writting modem partition... Done.
Writting sbl1 partition... Done.
Writting rpm partition... Done.
Writting tz partition... Done.
Writting sdi partition... Done.
Writting aboot partition... Done.
Writting rpmb partition... Done.
Writting tzb partition... Done.
Writting abootb partition... Done.
Writting pad partition... Done.
Writting modemst1 partition... Done.
Writting modemst2 partition... Done.
Writting CustomPart partition... Done.


Smart Repair is successfully complete.
SW: 1.3.0; FW: 1.15.
Disconnected.


After Repair Updete

Done ...........