LG MS345 Dead Boot Repair Done with MedusaPro
Welcome to Medusa Pro Software version 1.3.4. Started.
Reader #0: FT SCR2000 0
Reader #1: Generic EMV Smartcard Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : MS345
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_MS345_EMMC_QN1SMB.srf
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto
Connecting...
Device : Samsung eMMC QN1SMB
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info
CID : 150100514E31534D42019B2EDAF162DB
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QN1SMB
Product revision : 0.1
Product serial number : (hex) 9B2EDAF1
Manufacturing date : 06/2015
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/QN1SMB_02_04_2017_17_53_15.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.4; FW: 1.16.
P00: GPT (00000000, 00000400)
P01: sbl1 (00000400, 00000400)
P02: tz (00000800, 00000400)
P03: hyp (00000C00, 00000400)
P04: rpm (00001000, 00000400)
P05: aboot (00001400, 00001000)
P06: pad (00002400, 00000C00)
P07: sbl1bak (00003000, 00000400)
P08: tzbak (00003400, 00000400)
P09: hypbak (00003800, 00000400)
P10: rpmbak (00003C00, 00000400)
P11: abootbak (00004000, 00001000)
P12: misc (00005000, 00008000)
P13: persist (0000D000, 00008000)
P14: metadata (00015000, 00000400)
P15: modemst1 (00015400, 00000C00)
P16: modemst2 (00016000, 00000C00)
P17: laf (00016C00, 0000C000)
P18: boot (00022C00, 0000C000)
P19: recovery (0002EC00, 0000C000)
P20: fsg (0003AC00, 00000C00)
P21: fsc (0003B800, 00000400)
P22: ssd (0003BC00, 00000400)
P23: DDR (0003C000, 00000400)
P24: sec (0003C400, 00000400)
P25: encrypt (0003C800, 00000400)
P26: eksst (0003CC00, 00000400)
P27: rct (0003D000, 00000400)
P28: sns (0003D400, 00004000)
P29: factory (00041400, 00010000)
P30: fota (00051400, 00010000)
P31: drm (00061400, 00004000)
P32: mpt (00065400, 0000C000)
P33: modem (00071400, 00020000)
P34: persistent (00091400, 00001000)
P35: system (00092400, 004ACC00)
P36: cache (0053F000, 001A9000)
P37: userdata (006E8000, 007A0000)
P38: grow (00E88000, 00007FDF)
Erasing. Please wait... Done.
SW: 1.3.4; FW: 1.16.
Reapairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/LG_MS345_EMMC_QN1SMB.srf".
Write data verification is enabled.
Switched to user area.
Writing GPT partition... Done.
Writing sbl1 partition... Done.
Writing tz partition... Done.
Writing hyp partition... Done.
Writing rpm partition... Done.
Writing aboot partition... Done.
Writing pad partition... Done.
Writing misc partition... Done.
Writing laf partition... Done.
Writing boot partition... Done.
Writing sec partition... Done.
Smart Repair is successfully complete.
SW: 1.3.4; FW: 1.16.
Disconnected.
Welcome to Medusa Pro Software version 1.3.4. Started.
Reader #0: FT SCR2000 0
Reader #1: Generic EMV Smartcard Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : MS345
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_MS345_EMMC_QN1SMB.srf
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto
Connecting...
Device : Samsung eMMC QN1SMB
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info
CID : 150100514E31534D42019B2EDAF162DB
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QN1SMB
Product revision : 0.1
Product serial number : (hex) 9B2EDAF1
Manufacturing date : 06/2015
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/QN1SMB_02_04_2017_17_53_15.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.4; FW: 1.16.
P00: GPT (00000000, 00000400)
P01: sbl1 (00000400, 00000400)
P02: tz (00000800, 00000400)
P03: hyp (00000C00, 00000400)
P04: rpm (00001000, 00000400)
P05: aboot (00001400, 00001000)
P06: pad (00002400, 00000C00)
P07: sbl1bak (00003000, 00000400)
P08: tzbak (00003400, 00000400)
P09: hypbak (00003800, 00000400)
P10: rpmbak (00003C00, 00000400)
P11: abootbak (00004000, 00001000)
P12: misc (00005000, 00008000)
P13: persist (0000D000, 00008000)
P14: metadata (00015000, 00000400)
P15: modemst1 (00015400, 00000C00)
P16: modemst2 (00016000, 00000C00)
P17: laf (00016C00, 0000C000)
P18: boot (00022C00, 0000C000)
P19: recovery (0002EC00, 0000C000)
P20: fsg (0003AC00, 00000C00)
P21: fsc (0003B800, 00000400)
P22: ssd (0003BC00, 00000400)
P23: DDR (0003C000, 00000400)
P24: sec (0003C400, 00000400)
P25: encrypt (0003C800, 00000400)
P26: eksst (0003CC00, 00000400)
P27: rct (0003D000, 00000400)
P28: sns (0003D400, 00004000)
P29: factory (00041400, 00010000)
P30: fota (00051400, 00010000)
P31: drm (00061400, 00004000)
P32: mpt (00065400, 0000C000)
P33: modem (00071400, 00020000)
P34: persistent (00091400, 00001000)
P35: system (00092400, 004ACC00)
P36: cache (0053F000, 001A9000)
P37: userdata (006E8000, 007A0000)
P38: grow (00E88000, 00007FDF)
Erasing. Please wait... Done.
SW: 1.3.4; FW: 1.16.
Reapairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/LG_MS345_EMMC_QN1SMB.srf".
Write data verification is enabled.
Switched to user area.
Writing GPT partition... Done.
Writing sbl1 partition... Done.
Writing tz partition... Done.
Writing hyp partition... Done.
Writing rpm partition... Done.
Writing aboot partition... Done.
Writing pad partition... Done.
Writing misc partition... Done.
Writing laf partition... Done.
Writing boot partition... Done.
Writing sec partition... Done.
Smart Repair is successfully complete.
SW: 1.3.4; FW: 1.16.
Disconnected.
