UMT mi note 9 mi account & frp done umt

[Yogesh B N]

Brand : Xiaomi
Model : Note 9
Operation : Reset Mi Account
Connection Mode : BROM (Hold Key for BROM Mode)
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM40
Port Name: MediaTek USB Port_V1632 (COM40)
Path: \\?\usb#vid_0e8d&pid_0003#5&854f772&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0707, [MT6768]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM40)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Unable to read!
Userdata is NOT ENCRYPTED
Resetting Mi Account...
- Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.9]

Brand : Xiaomi
Model : Note 9
Operation : Reset FRP
Connection Mode : BROM (Hold Key for BROM Mode)
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM40
Port Name: MediaTek USB Port_V1632 (COM40)
Path: \\?\usb#vid_0e8d&pid_0003#5&854f772&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0707, [MT6768]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM40)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Unable to read!
Userdata is NOT ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.9]

 

[Alexandre ribeiro]

Marca: Xiaomi
Modelo: Nota 9
Operação: redefinir conta Mi
Modo de conexão: BROM (tecla segure para o modo BROM)
Segure VOL UP + DOWN e conecte o cabo USB.
Alguns telefones podem ter combinações de teclas diferentes para o modo BROM.
Aguardando dispositivo no modo BROM ...
Porta: COM40
Nome da porta: MediaTek USB Port_V1632 (COM40)
Caminho: \\? \ Usb # vid_0e8d & pid_0003 # 5 & 854f772 & 0 & 2 # {86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0707, [MT6768]
Informações de hardware: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: Verdadeiro
DA Auth: True
Desativando WatchDog ...
- sucesso
Enviando dados de Payload ...
- Carga enviada
Iniciando transferência de controle ...
- Feito
Esperando pelo resultado ...
- Resultado: 0xA1A2A3A4
Desativar sucesso de autenticação
Esperando o telefone no modo Flash ...
Conecte o telefone desligado em 30 segundos ...
Porta: Porta USB MediaTek_V1632 (COM40)
Conectado ao BROM.
Enviando Agente de Download ...
conectar estágio final de DA: 2, habilitar DRAM no 1º DA: 0
Conectado ao Agente de Download ..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Unable to read!
Userdata is NOT ENCRYPTED
Resetting Mi Account...
- Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.9]

Brand : Xiaomi
Model : Note 9
Operation : Reset FRP
Connection Mode : BROM (Hold Key for BROM Mode)
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM40
Port Name: MediaTek USB Port_V1632 (COM40)
Path: \\?\usb#vid_0e8d&pid_0003#5&854f772&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0707, [MT6768]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Desativar sucesso de autenticação
Esperando o telefone no modo Flash ...
Conecte o telefone desligado em 30 segundos ...
Porta: Porta USB MediaTek_V1632 (COM40)
Conectado ao BROM.
Enviando Agente de Download ...
conectar estágio final de DA: 2, habilitar DRAM no 1º DA: 0
Conectado ao Agente de Download ..
Sincronizando com o alvo ...
Lendo tabela de partição ...
Armazenamento: eMMC
Lendo informações do dispositivo ...
Incapaz de ler!
Dados do usuário NÃO ESTÃO ENCRYPTED
Redefinindo FRP ...
Reinicialização de FRP concluída.
Desconecte a bateria / cabo e ligue o telefone.
[UltimateMTK Ver. 3,9]

 

[Alexandre ribeiro]

amigo ele nao bloqueia novamente quando coloca o chip ou quando coneca no wifi nao me tire esta duvida por favor

 

[waleedwww]

what about connecting wifi after reset ?

 

[Yogesh B N]

working fine