Logs
Code:
Welcome to Medusa Pro Software version 1.6.1.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Reader #2: FT SCR2000 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QE13MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100514531334D420D7D8DDA174467
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE13MB
Product revision : 0.13
Product serial number : (hex) 7D8DDA17
Manufacturing date : 04/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : a3e00000 bytes
Device sector size : 512 bytes
Partition offset : 2424832
Number of sectors : 7077888
Device Manufacturer :motorola
Device Platform :msm8937
Build ID :NCQS26.69-64-2
Release ID :7.1.1
Device Model :Moto E (4)
Device Name :sperry_sprint
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QE13MB_24_07_2018_18_17_23.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.1; FW: 1.23.
P00: GPT (00000000, 00000100) 128 KB
P01: sbl1 (00000100, 00000400) 512 KB
P02: rpm (00000500, 00000200) 256 KB
P03: tz (00000900, 00000E00) 1792 KB
P04: devcfg (00001900, 00000100) 128 KB
P05: aboot (00001B00, 00000C00) 1536 KB
P06: cmnlib (00002700, 00000200) 256 KB
P07: cmnlib64 (00002900, 00000200) 256 KB
P08: keymaster (00002B00, 00000200) 256 KB
P09: prov (00002D00, 00000180) 192 KB
P10: sbl1bak (00002F00, 00000400) 512 KB
P11: rpmbak (00003300, 00000200) 256 KB
P12: tzbak (00003700, 00000E00) 1792 KB
P13: devcfgbak (00004700, 00000100) 128 KB
P14: abootbak (00004900, 00000C00) 1536 KB
P15: cmnlibbak (00005500, 00000200) 256 KB
P16: cmnlib64bak (00005700, 00000200) 256 KB
P17: keymasterbak (00005900, 00000200) 256 KB
P18: provbak (00005B00, 00000180) 192 KB
P19: modem (00005D00, 00032000) 100 MB
P20: fsc (00037D00, 00000002) 1024 b
P21: ssd (00037D02, 00000010) 8 KB
P22: dsp (00037D12, 00008000) 16 MB
P23: DDR (0003FE00, 00000040) 32 KB
P24: sec (0003FE40, 00000020) 16 KB
P25: utags (0003FF00, 00000400) 512 KB
P26: utagsBackup (00040300, 00000400) 512 KB
P27: modemst1 (00040700, 00001000) 2048 KB
P28: modemst2 (00041700, 00001000) 2048 KB
P29: fsg (00042700, 00004000) 8 MB
P30: persist (00046700, 00010000) 32 MB
P31: frp (00056700, 00000400) 512 KB
P32: cid (00056B00, 00000100) 128 KB
P33: logo (00056C00, 00008000) 16 MB
P34: carrier (0005EC00, 00008000) 16 MB
P35: metadata (00066C00, 00000400) 512 KB
P36: kpan (00067000, 00004000) 8 MB
P37: boot (0006B000, 00008000) 16 MB
P38: recovery (00073000, 000080C8) 16.1 MB
P39: misc (0007B100, 00000800) 1024 KB
P40: limits (0007B900, 00000040) 32 KB
P41: mota (0007BA00, 00000400) 512 KB
P42: dip (0007BE00, 00000800) 1024 KB
P43: syscfg (0007C600, 00000400) 512 KB
P44: logs (0007CA00, 00001000) 2048 KB
P45: apdp (0007DA00, 00000200) 256 KB
P46: msadp (0007DC00, 00000200) 256 KB
P47: dpo (0007DE00, 00000010) 8 KB
P48: padA (0007DF00, 00002100) 4.125 MB
P49: sp (00080000, 00004000) 8 MB
P50: hw (00084000, 00004000) 8 MB
P51: oem (00088000, 00148000) 656 MB
P52: cache (001D0000, 00080000) 256 MB
P53: system (00250000, 006C0000) 3456 MB
P54: userdata (00910000, 0140EFDF) 10.03 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QE13MB_Gpt_0x0_0x100_24_07_2018_18_17_23.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.1; FW: 1.23.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QE13MB_Cid_0x56b00_0x100_24_07_2018_18_17_23.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.1; FW: 1.23.
Please select file.
Selected file: F:/MOTOROLA/XT1766/SPERRY_SPRINT_NCQS26.69-64-5_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml/flashfile.xml.
File parsing finished.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Write data verification is enabled.
Writing. Please wait...
Writing partition sbl1... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition devcfg... Done.
Writing partition aboot... Done.
Writing partition cmnlib... Done.
Writing partition cmnlib64... Done.
Writing partition keymaster... Done.
Writing partition prov... Done.
Writing partition modem... Done.
Writing partition dsp... Done.
Erasing partition DDR... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Writing partition fsg... Done.
Writing partition logo... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition oem... Done.
Erasing partition cache... Done.
Writing is finished.
SW: 1.6.1; FW: 1.23.
