Dear Friends,
Moto G10 (XT2127) Edl Test point to unbrick, repairs, frp remove, etc with loader.
Like if U Like
Moto G10 (XT2127) Edl Test point to unbrick, repairs, frp remove, etc with loader.
Like if U Like
HOT Motorola G10_XT2127 EDL Test Point
- Thread starter aashiq786anis
- Start date
fagnerlins
Junior Member
Short test point to enter edl mode.
Run blank-flash.bat to unbrick.
XT2127x & XT2127-4
Note : Unbrick restore edl to fastboot mode. Not for frp remove.
fagnerlins
Junior Member
Bypass or online unlock, depends on build number.
Blankflash will not remove frp from Qualcomm motorola.
Don't use blankflash for frp remove.
Franky38
Moderator
- Jul 28, 2018
- 2,552
- 2,566
- PayPal:
-
Good, if the loader is the correct one according to the processor and is patched or edited, with any software you can use it and you have the loader to download the first post of this thread, as you have mentioned nck qualcomm, custom loader section
Exe Version: NCK Box / Dongle Premium v2 - Qualcomm 0.15.4
Brand: Motorola
Model: Moto G84 5G (T3TCS33)
Operation: Reset FRP
How to connect phone:
1. With phone off enter edl mode keep pressing vol+ and vol- buttons and insert usb cable
2. If this metod not work, use edl cable to force emergenty download mode.
3. If this metod not work, use testpoint to force emergenty download mode.
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM12) detected.
Firehose protocol: 2
HW ID: E1601300
PK HASH: ABBCC86FE393B13D59E2A2EC944AF26DA3FA3D4B2A1CCD2FB383C73E0FFFC30D
Using custom loader: programmer.elf
Arhitecture:64 bits
[64]Sending loader, please wait..
Waiting for loader to start...
[0] Send NOP ok, loader start.
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
[0]Partition info read error, aborting.
[2]Error, loader not start.
*************************************
Log saved: C:\nckDongle\qualcomm_module\backup_folder\qc_module_Logs\reset_frp__0000E802E1601300_ABBCC86FE393B13D59E2A2EC944AF26DA3FA3D4B2A1CCD2FB383C73E0FFFC30D2.txt
Total Time: 00:00:16
Done.
Brand: Motorola
Model: Moto G84 5G (T3TCS33)
Operation: Reset FRP
How to connect phone:
1. With phone off enter edl mode keep pressing vol+ and vol- buttons and insert usb cable
2. If this metod not work, use edl cable to force emergenty download mode.
3. If this metod not work, use testpoint to force emergenty download mode.
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM12) detected.
Firehose protocol: 2
HW ID: E1601300
PK HASH: ABBCC86FE393B13D59E2A2EC944AF26DA3FA3D4B2A1CCD2FB383C73E0FFFC30D
Using custom loader: programmer.elf
Arhitecture:64 bits
[64]Sending loader, please wait..
Waiting for loader to start...
[0] Send NOP ok, loader start.
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
[0]Partition info read error, aborting.
[2]Error, loader not start.
*************************************
Log saved: C:\nckDongle\qualcomm_module\backup_folder\qc_module_Logs\reset_frp__0000E802E1601300_ABBCC86FE393B13D59E2A2EC944AF26DA3FA3D4B2A1CCD2FB383C73E0FFFC30D2.txt
Total Time: 00:00:16
Done.
Selected model: Motorola Qualcomm
Operation: Read Flash Info
Software version: 9.14
Work ID: 104735971
Waiting for device... OK
Device found at COM12
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 4255829996
Sahara ver: 2
OEM PK HASH: ABBCC86FE393B13D59E2A2EC944AF26DA3FA3D4B2A1CCD2FB383C73E0FFFC30DC1736DCB2752E955A61421C349974F90
CPU: SM4250-AA (Snapdragon 460)
Vendor: Motorola
MSM HW ID: 001360E102E80000
SBL SW Ver: 00000000
Prepare custom loader file... OK
Loader hash: A2E03794C6688B9ED521E0F81C2E318F2F7B914D
Loader PK hash: ABBCC86FE393B13D59E2A2EC944AF26DA3FA3D4B2A1CCD2FB383C73E0FFFC30DC1736DCB2752E955A61421C349974F90
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [EMMC]
Get storage info... OK
Storage info:
Type: EMMC
Name:
Page size: 200
Block size: 200
Partition count: 2
PART0 size: 0x0E8F800000 (58,24Gb)
PART1 size: 0x0000000000 (0Byte(s))
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... error(ERR_SH)
Operation: Read Flash Info
Software version: 9.14
Work ID: 104735971
Waiting for device... OK
Device found at COM12
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 4255829996
Sahara ver: 2
OEM PK HASH: ABBCC86FE393B13D59E2A2EC944AF26DA3FA3D4B2A1CCD2FB383C73E0FFFC30DC1736DCB2752E955A61421C349974F90
CPU: SM4250-AA (Snapdragon 460)
Vendor: Motorola
MSM HW ID: 001360E102E80000
SBL SW Ver: 00000000
Prepare custom loader file... OK
Loader hash: A2E03794C6688B9ED521E0F81C2E318F2F7B914D
Loader PK hash: ABBCC86FE393B13D59E2A2EC944AF26DA3FA3D4B2A1CCD2FB383C73E0FFFC30DC1736DCB2752E955A61421C349974F90
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [EMMC]
Get storage info... OK
Storage info:
Type: EMMC
Name:
Page size: 200
Block size: 200
Partition count: 2
PART0 size: 0x0E8F800000 (58,24Gb)
PART1 size: 0x0000000000 (0Byte(s))
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... error(ERR_SH)
Selected model: Motorola Qualcomm
Operation: Erase FRP
Software version: 9.14
Work ID: 104736050
Waiting for device... OK
Device found at COM12
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 4255829996
Sahara ver: 2
OEM PK HASH: ABBCC86FE393B13D59E2A2EC944AF26DA3FA3D4B2A1CCD2FB383C73E0FFFC30DC1736DCB2752E955A61421C349974F90
CPU: SM4250-AA (Snapdragon 460)
Vendor: Motorola
MSM HW ID: 001360E102E80000
SBL SW Ver: 00000000
Prepare custom loader file... OK
Loader hash: A2E03794C6688B9ED521E0F81C2E318F2F7B914D
Loader PK hash: ABBCC86FE393B13D59E2A2EC944AF26DA3FA3D4B2A1CCD2FB383C73E0FFFC30DC1736DCB2752E955A61421C349974F90
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [EMMC]
Get storage info... OK
Storage info:
Type: EMMC
Name:
Page size: 200
Block size: 200
Partition count: 2
PART0 size: 0x0E8F800000 (58,24Gb)
PART1 size: 0x0000000000 (0Byte(s))
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... error(ERR_SH)
Erase FRP... error(4.0.2)
Operation: Erase FRP
Software version: 9.14
Work ID: 104736050
Waiting for device... OK
Device found at COM12
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 4255829996
Sahara ver: 2
OEM PK HASH: ABBCC86FE393B13D59E2A2EC944AF26DA3FA3D4B2A1CCD2FB383C73E0FFFC30DC1736DCB2752E955A61421C349974F90
CPU: SM4250-AA (Snapdragon 460)
Vendor: Motorola
MSM HW ID: 001360E102E80000
SBL SW Ver: 00000000
Prepare custom loader file... OK
Loader hash: A2E03794C6688B9ED521E0F81C2E318F2F7B914D
Loader PK hash: ABBCC86FE393B13D59E2A2EC944AF26DA3FA3D4B2A1CCD2FB383C73E0FFFC30DC1736DCB2752E955A61421C349974F90
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [EMMC]
Get storage info... OK
Storage info:
Type: EMMC
Name:
Page size: 200
Block size: 200
Partition count: 2
PART0 size: 0x0E8F800000 (58,24Gb)
PART1 size: 0x0000000000 (0Byte(s))
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... error(ERR_SH)
Erase FRP... error(4.0.2)
Operation : Read Info
Waiting for QCOM EDL usb device : OK
USB Port : Qualcomm HS-USB QDLoader 9008 (COM12)
USB Device : oem104.inf v2.1.3.5 12-17-2018 [0x5C6-0x9008]
Connecting device : OK
Reading Chip Info : OK
- Sahara version : 2
- Chip Serial Number : fdaacfec
- MSM HWID : 0x1360e1 | model_id:0x0000 | oem_id:02e8 Lenovo
- OEM PKHASH : abbcc86fe393b13d59e2a2ec944af26da3fa3d4b2a1ccd2fb383c73e0fffc30d
- HW_ID : 001360e102e80000
- CHIP : Qualcomm Snapdragon 460 [SM4250]
Connecting to Server : OK
Sending Firehose Programmer [P1:635036] : OK
Configuring Firehose : OK
Memory Type : eMMC | Block Size 512 | LUN Count 4 | OEM ID 144 | Product hC9aP3
Reading GUID Partition Table : OK [79]
Reading Device Info[basic] : OK
Elapsed Time : 03:55 at [2026/01/05 18:19:44]
Waiting for QCOM EDL usb device : OK
USB Port : Qualcomm HS-USB QDLoader 9008 (COM12)
USB Device : oem104.inf v2.1.3.5 12-17-2018 [0x5C6-0x9008]
Connecting device : OK
Reading Chip Info : OK
- Sahara version : 2
- Chip Serial Number : fdaacfec
- MSM HWID : 0x1360e1 | model_id:0x0000 | oem_id:02e8 Lenovo
- OEM PKHASH : abbcc86fe393b13d59e2a2ec944af26da3fa3d4b2a1ccd2fb383c73e0fffc30d
- HW_ID : 001360e102e80000
- CHIP : Qualcomm Snapdragon 460 [SM4250]
Connecting to Server : OK
Sending Firehose Programmer [P1:635036] : OK
Configuring Firehose : OK
Memory Type : eMMC | Block Size 512 | LUN Count 4 | OEM ID 144 | Product hC9aP3
Reading GUID Partition Table : OK [79]
Reading Device Info[basic] : OK
Elapsed Time : 03:55 at [2026/01/05 18:19:44]
Operation : Remove FRP
Waiting for QCOM EDL usb device : OK
USB Port : Qualcomm HS-USB QDLoader 9008 (COM12)
USB Device : oem104.inf v2.1.3.5 12-17-2018 [0x5C6-0x9008]
Connecting device : OK
Reading Chip Info : OK
- Sahara version : 2
- Chip Serial Number : fdaacfec
- MSM HWID : 0x1360e1 | model_id:0x0000 | oem_id:02e8 Lenovo
- OEM PKHASH : abbcc86fe393b13d59e2a2ec944af26da3fa3d4b2a1ccd2fb383c73e0fffc30d
- HW_ID : 001360e102e80000
- CHIP : Qualcomm Snapdragon 460 [SM4250]
Connecting to Server : OK
Sending Firehose Programmer [P1:635036] : OK
Configuring Firehose : OK
Memory Type : eMMC | Block Size 512 | LUN Count 4 | OEM ID 144 | Product hC9aP3
Reading GUID Partition Table : OK [79]
Reading Device Info[basic] : OK
Removing frp lock : (P1)
WIPE frp : OK
Rebooting device : OK
Elapsed Time : 03:58 at [2026/01/05 18:24:44
Waiting for QCOM EDL usb device : OK
USB Port : Qualcomm HS-USB QDLoader 9008 (COM12)
USB Device : oem104.inf v2.1.3.5 12-17-2018 [0x5C6-0x9008]
Connecting device : OK
Reading Chip Info : OK
- Sahara version : 2
- Chip Serial Number : fdaacfec
- MSM HWID : 0x1360e1 | model_id:0x0000 | oem_id:02e8 Lenovo
- OEM PKHASH : abbcc86fe393b13d59e2a2ec944af26da3fa3d4b2a1ccd2fb383c73e0fffc30d
- HW_ID : 001360e102e80000
- CHIP : Qualcomm Snapdragon 460 [SM4250]
Connecting to Server : OK
Sending Firehose Programmer [P1:635036] : OK
Configuring Firehose : OK
Memory Type : eMMC | Block Size 512 | LUN Count 4 | OEM ID 144 | Product hC9aP3
Reading GUID Partition Table : OK [79]
Reading Device Info[basic] : OK
Removing frp lock : (P1)
WIPE frp : OK
Rebooting device : OK
Elapsed Time : 03:58 at [2026/01/05 18:24:44