Free Motorola Nougat 2017 FRP Reset Done Without Device

Admin

Administrator
Oct 21, 2016
1,110
2,748
Pakistan
Skype
marhabamobiles
Sonork ID
100.1640287



Motorola Nougat FRP Reset Pack GsmMarhaba
1. Install "MotoService"
2. After "MotoService" installation, Don't Run Just Close it
3. Install MotoServiceOptions
4. Install minimal_adb_fastboot_v1.1.3
5. Open "MotoService" Normally and minimize Login menus.
6. Turn the Mobile off and then on again in "FASTBOOT" mode (POWER +
VOLUME -), select "FACTORY MODE" and press Power.
Computer:
7. Open the "MotoService" program, go to "Options" - "Port Setup", see if the
On the display, the device will select the number you wish to place.
Press "Assing", and "Done"
8. In the "MotoService" Menu select "Power Test", done this on the device port will appear
Again "Tower Test" press this option again, after this will open a window and
Press "Yes"
9. After complete Remove your handset and switch it back on FACTORY MODE and connect to the computer,
This will enable the option to Enable USB debugging check the option and ok.

10. ADB Commands:
Put These Command:
adb devices
adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1

If Above Command not Working Then Try This Command:
adb shell am start -n com.google.android.gsf.login/

If Above Command not Working Then Try This Command:
adb shell am start -n com.google.android.gsf.login.LoginActivity

11. Restart you Phone. it will be unlocked Done....!!
 

Rosney

Junior Member
Apr 6, 2017
2
0
USA
im having the problem motoservice says Reading Data but nothing happens, stays in there and show no device info, please help. The second windows that appears after "you have reached.....", that says "Device 1 not detected......." is not appearing, an motoservice just stays at "reading Data "
 
Last edited:

suban.imran

Member
Nov 27, 2016
6
0
pakistan



Motorola Nougat FRP Reset Pack GsmMarhaba
1. Install "MotoService"
2. After "MotoService" installation, Don't Run Just Close it
3. Install MotoServiceOptions
4. Install minimal_adb_fastboot_v1.1.3
5. Open "MotoService" Normally and minimize Login menus.
6. Turn the Mobile off and then on again in "FASTBOOT" mode (POWER +
VOLUME -), select "FACTORY MODE" and press Power.
Computer:
7. Open the "MotoService" program, go to "Options" - "Port Setup", see if the
On the display, the device will select the number you wish to place.
Press "Assing", and "Done"
8. In the "MotoService" Menu select "Power Test", done this on the device port will appear
Again "Tower Test" press this option again, after this will open a window and
Press "Yes"
9. After complete Remove your handset and switch it back on FACTORY MODE and connect to the computer,
This will enable the option to Enable USB debugging check the option and ok.

10. ADB Commands:
Put These Command:
adb devices
adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1

If Above Command not Working Then Try This Command:
adb shell am start -n com.google.android.gsf.login/

If Above Command not Working Then Try This Command:
adb shell am start -n com.google.android.gsf.login.LoginActivity

11. Restart you Phone. it will be unlocked Done....!!
nice sharing GOOOOOOOOOOOOOOOOOOOOOOD
 
Top