Logs
Code:
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Sandisk eMMC SEM32G
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 45010053454D33324707F0B7D4969011
Manufacturer ID : 0X45
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : SEM32G
Product revision : 0.7
Product serial number : (hex) F0B7D496
Manufacturing date : 09/2013
---------------------------------------------------------------
CSD Info
CSD : D00F00320F5903FFFFFFFFFF8A40407F
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 10 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Max enhanced data size: 15253504 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 3244032
Number of sectors : 4325376
Device Manufacturer :motorola
Device Platform :msm8960
Build ID :SU6-7.7
Display Build ID :SU6-7.7
Release ID :4.4.4
Device Model :XT1080
Device Name :obake_verizon
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :obake_verizon-user 4.4.4 SU6-7.7 5 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/SEM32G_30_10_2018_21_48_29.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.7; FW: 1.24.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00032000) 100 MB
P02: sbl1 (00032100, 00000BB8) 1500 KB
P03: sbl2 (00032CB8, 00000BB8) 1500 KB
P04: sbl3 (00033870, 00000404) 514 KB
P05: aboot (00034870, 00000400) 512 KB
P06: rpm (00035428, 0000011C) 142 KB
P07: tz (00035810, 000001A4) 210 KB
P08: utags (00035BF8, 00000400) 512 KB
P09: logs (00035FF8, 00000800) 1024 KB
P10: padA (000367F8, 00001808) 3076 KB
P11: sbl2Backup (00038000, 00000BB8) 1500 KB
P12: sbl3Backup (00038BB8, 00001000) 2048 KB
P13: abootBackup (00039BB8, 00000BB8) 1500 KB
P14: rpmBackup (0003A770, 000003E8) 500 KB
P15: tzBackup (0003AB58, 000003E8) 500 KB
P16: utagsBackup (0003AF40, 00000400) 512 KB
P17: padB (0003B340, 00000CC0) 1632 KB
P18: modemst1 (0003C000, 00001800) 3072 KB
P19: modemst2 (0003D800, 00001800) 3072 KB
P20: mbl (0003F000, 00001000) 2048 KB
P21: hob (00040000, 00000500) 640 KB
P22: dhob (00040500, 00000010) 8 KB
P23: persist (00040600, 00004000) 8 MB
P24: ssd (00044600, 00000010) 8 KB
P25: fsg (00044610, 00001800) 3072 KB
P26: sp (00045E10, 00000800) 1024 KB
P27: misc (00046610, 00000400) 512 KB
P28: pds (00046A10, 00001800) 3072 KB
P29: cid (00048210, 00000100) 128 KB
P30: logo (00048310, 00002000) 4 MB
P31: clogo (0004A310, 00002000) 4 MB
P32: devtree (0004C310, 00000800) 1024 KB
P33: boot (0004CC00, 00005000) 10 MB
P34: recovery (00051C00, 00005000) 10 MB
P35: kpan (00056C00, 00004000) 8 MB
P36: cache (0005AC00, 002BCC00) 1402 MB
P37: padC (00317800, 00000800) 1024 KB
P38: system (00318000, 00420000) 2112 MB
P39: customize (00738000, 00008000) 16 MB
P40: userdata (00740000, 032F5F00) 25.48 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SEM32G_Gpt_0x0_0x100_30_10_2018_21_48_29.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.7; FW: 1.24.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SEM32G_Cid_0x48210_0x100_30_10_2018_21_48_29.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.7; FW: 1.24.
Erasing partition GPT... Done.
Erasing partition modem... Done.
Erasing partition sbl1... Done.
Erasing partition sbl2... Done.
Erasing partition sbl3... Done.
Erasing partition aboot... Done.
Erasing partition rpm... Done.
Erasing partition tz... Done.
Erasing partition utags... Done.
Erasing partition logs... Done.
Erasing partition padA... Done.
Erasing partition sbl2Backup... Done.
Erasing partition sbl3Backup... Done.
Erasing partition abootBackup... Done.
Erasing partition rpmBackup... Done.
Erasing partition tzBackup... Done.
Erasing partition utagsBackup... Done.
Erasing partition padB... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Erasing partition mbl... Done.
Erasing partition hob... Done.
Erasing partition dhob... Done.
Erasing partition persist... Done.
Erasing partition ssd... Done.
Erasing partition fsg... Done.
Erasing partition sp... Done.
Erasing partition misc... Done.
Erasing partition pds... Done.
Erasing partition cid... Done.
Erasing partition logo... Done.
Erasing partition clogo... Done.
Erasing partition devtree... Done.
Erasing partition boot... Done.
Erasing partition recovery... Done.
Erasing partition kpan... Done.
Erasing partition cache... Done.
Erasing partition padC... Done.
Erasing partition system... Done.
Erasing partition customize... Done.
Erasing partition userdata... Done.
Erasing is finished.
SW: 1.6.7; FW: 1.24.
Write data verification is enabled.
Write partitions from C:/Users/test/Desktop/kala/Sandisk eMMC SDW32G_Tue Oct 30 2018_20_46_34.mpt file...
Writing partition GPT... Done.
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition sdi... Done.
Writing partition sec... Done.
Writing partition ddr... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition utags... Done.
Writing partition tz... Done.
Writing partition factorytune1... Done.
Writing partition padA... Done.
Writing partition sbl1bak... Done.
Writing partition abootBackup... Done.
Writing partition rpmBackup... Done.
Writing partition utagsBackup... Done.
Writing partition tzBackup... Done.
Writing partition mdm1m9kefs1... Done.
Writing partition mdm1m9kefs2... Done.
Writing partition padB... Done.
Writing partition frp... Done.
Writing partition logs... Done.
Writing partition persist... Done.
Writing partition mdm1hob... Done.
Writing partition mdm1dhob... Done.
Writing partition sp... Done.
Writing partition cid... Done.
Writing partition pds... Done.
Writing partition logo... Done.
Writing partition clogo... Done.
Writing partition misc... Done.
Writing partition padC... Done.
Writing partition mdm1m9kefs3... Done.
Writing partition mdm1m9kefsc... Done.
Writing partition ssd... Done.
Writing partition kpan... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition factorytune2... Done.
Writing partition cache... Done.
SW: 1.6.7; FW: 1.24.