this is what i did
the phone was encrypted :
and heres the emmc identify log :
Connection status: IUSB3HUB[#11]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8843-4939
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x24555647
Manufacturing date: Nov 2019
CID: 90014A48 43473861 34A22455 5647B6BC
CSD: D0270132 8F5903FF FFFFFFEF 8A400026
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Authentication Key not yet programmed]
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: INFINIX MOBILITY LIMITED
board: Infinix-X650C, name: H626
brand: Infinix, model: Infinix X650C
build model list: Infinix X650C
build id: PPR1.180610.011, version: 9 [Pie] (X650C-H626DEJ-P-200323V280)
build description: full_x650c_h626-user 9 PPR1.180610.011 59058 release-keys
Internal storage: 52.41 GiB
crypto state: unencrypted
eMMC selected: [HYNIX] H9HP52ACPMMDAR-KMM/64GB (BGA254)
what should i do is it ready to install in phone :
plz revert
thanks in advance
the phone was encrypted :
and heres the emmc identify log :
Connection status: IUSB3HUB[#11]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8843-4939
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x24555647
Manufacturing date: Nov 2019
CID: 90014A48 43473861 34A22455 5647B6BC
CSD: D0270132 8F5903FF FFFFFFEF 8A400026
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Authentication Key not yet programmed]
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: INFINIX MOBILITY LIMITED
board: Infinix-X650C, name: H626
brand: Infinix, model: Infinix X650C
build model list: Infinix X650C
build id: PPR1.180610.011, version: 9 [Pie] (X650C-H626DEJ-P-200323V280)
build description: full_x650c_h626-user 9 PPR1.180610.011 59058 release-keys
Internal storage: 52.41 GiB
crypto state: unencrypted
eMMC selected: [HYNIX] H9HP52ACPMMDAR-KMM/64GB (BGA254)
what should i do is it ready to install in phone :
plz revert
thanks in advance
