UFi new box adoptore 2in 1 bga 221 nd 254 not detecting 221 ics

[Dmind956]

hi i buy new box ...
bga 254 detecting ,, but bga221 not detecting in my adoptore


direct ic jumping detecting


help plz
Connection status: EHCI:HUB:HUB[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8844-3966
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.0 V, VCCQ: 2.8 V
Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Card might be DEAD, for moviNAND(Samsung) eMMC you may update the firmware with TestPoint ! ---

 

[aftab_ansari5287]

hi i buy new box ...
bga 254 detecting ,, but bga221 not detecting in my adoptore


direct ic jumping detecting


help plz
Connection status: EHCI:HUB:HUB[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8844-3966
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.0 V, VCCQ: 2.8 V
Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Card might be DEAD, for moviNAND(Samsung) eMMC you may update the firmware with TestPoint ! ---

Try Cleaning the Pin of the BGA Socket once Then Try to check eMMC.

 

[Dmind956]

i tried same not working