Solved Nokia 2.1 TA-1080/84/86 TA-1092/93 E2M Flash NBO File DONE(UMT KING)

This topic has been solved

GSM *AR

Junior Member
Apr 30, 2020
4
3
Punjab Pakistan
Tested On TA-1084 & Done
Special thanks

Arslanazed:W:


Brand : Nokia
Operation : Flash Firmware (nb0)
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : A57FDEEB0D02233786D8DDCA8A9889D62F92D43EE56EAC9966024663C39A5B06
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, EMMC, 8 GB
LU Count : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [E2M-0-021Q-NON-HLOS.bin] -> [modem]...Done
Writing [E2M-0-021Q-00WW-1-2-emmc_appsboot.mbn] -> [aboot]...Done
Writing [E2M-0-021Q-00WW-1-2-emmc_appsboot.mbn] -> [abootbak]...Done
Writing [E2M-0-021Q-00WW-1-2-boot.img] -> [boot]...Done
Writing [E2M-0-021Q-00WW-1-2-recovery.img] -> [recovery]...Done
Writing [E2M-0-021Q-00WW-1-2-system.img] -> [system]...Done
Writing [E2M-0-021Q-00WW-1-2-vendor.img] -> [vendor]...Done
Writing [E2M-0-021Q-cmnlib_30.mbn] -> [cmnlib]...Done
Writing [E2M-0-021Q-cmnlib_30.mbn] -> [cmnlibbak]...Done
Writing [E2M-0-021Q-cmnlib64_30.mbn] -> [cmnlib64]...Done
Writing [E2M-0-021Q-cmnlib64_30.mbn] -> [cmnlib64bak]...Done
Writing [E2M-0-021Q-keymaster64.mbn] -> [keymaster]...Done
Writing [E2M-0-021Q-keymaster64.mbn] -> [keymasterbak]...Done
Writing [E2M-00WW-022-splash.img] -> [splash]...Done
Writing [E2M-0-021Q-sbl1.mbn] -> [sbl1]...Done
Writing [E2M-0-021Q-sbl1.mbn] -> [sbl1bak]...Done
Writing [E2M-0-021Q-rpm.mbn] -> [rpm]...Done
Writing [E2M-0-021Q-rpm.mbn] -> [rpmbak]...Done
Writing [E2M-0-021Q-tz.mbn] -> [tz]...Done
Writing [E2M-0-021Q-tz.mbn] -> [tzbak]...Done
Writing [E2M-0-021Q-devcfg.mbn] -> [devcfg]...Done
Writing [E2M-0-021Q-devcfg.mbn] -> [devcfgbak]...Done
Writing [E2M-0-021Q-adspso.bin] -> [dsp]...Done
Writing [E2M-0-021Q-NV-default.mbn] -> [default_nv]...Done
Writing [E2M-0-021Q-hwcfg.img] -> [hwcfg]...Done
Writing [E2M-00WW-001-sutinfo.img] -> [sutinfo]...Done
Writing [systeminfo.img] -> [systeminfo]...Done
Writing [E2M-0-021Q-00WW-1-2-hidden.img] -> [hidden]...Done
Writing [E2M-00WW-005-cda.img] -> [cda]...Done
Writing [E2M-0-021Q-00WW-1-2-cache.img] -> [cache]...Done
Writing [E2M-0-021Q-00WW-1-2-mdtp.img] -> [mdtp]...Done
Writing [E2M-0-021Q-gpt_main0.bin] -> [PrimaryGPT]...Done
Writing [E2M-0-021Q-gpt_backup0.bin] -> [BackupGPT]...Done
Applying Patches................Done
Resetting FRP...Done
Setting Bootable Stroage Drive to 0...Done
Operation Finished.
QcFire Ver. 7.2
 
  • Like
Reactions: Arslanazed

mophat

Active Member
Mar 19, 2019
16
1
FRP AND FLASHING DONE >>> THANKS

Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM47)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : A57FDEEB0D02233786D8DDCA8A9889D62F92D43EE56EAC9966024663C39A5B06
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_021]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, EMMC, 8 GB
LU Count : 1 [0x00E90000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software : 00WW_4_11I, 00WW_4_11I [Tue Jul 20 11:41:11 CST 2021]
Android Ver. : 10
Patch Level : 2021-08-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 7.3
 
  • Like
Reactions: Arslanazed
Top