Nokia 2 ( TA-1011 ) Rawprogram write failed! Writing Firmware Failed Please Help Me

All TECH 4 You

Friend's Martview
Feb 26, 2019
673
288
Ahemdabad,Gujrat
Hello Everyone Today In My Shop Come Nokia 2 TA-1011 With hang On LOGO Condition Than Decide Flash IN Octoplus FRP Tool Than I Download This Firmware "E1M-0680-0-00WW-B02.nb0.7z" From Support Site But Again-4 This Error Coming During Firmware Update So Please Help Me


Here LOG:


Platform: NOKIA
Selected model: TA-1011
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don’t turn off phone and don’t disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage.
Put the phone into EDL mode:
  1. Attach testpoint as shown in Help manual;
  2. Connect USB cable;
  3. Release testpoint after 3-5 seconds.
Found phone on COM292
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 009600E100000000
QC CPU: Snapdragon 210 MSM8909
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Writing firmware...
Selected firmware files:
H:\Chinese Firmware\Nokia\Nokia 2 TA-1011\E1M-0680-0-00WW-B02.nb0.7z\E1M-0680-0-00WW-B02.nb0\E1M-0680-0-00WW-B02.nb0
Loading firmware...
Firmware version: 1.0
Firmware model: E1M
Writing PrimaryGPT...
Writing rpm...
Writing rpmbak...
Writing sbl1...
Writing sbl1bak...
Writing tz...
Writing tzbak...
Writing cmnlib...
Writing cmnlibbak...
Writing keymaster...
Writing keymasterbak...
Writing splash...
Writing ftm...
Writing boot...
Writing system...
Erasing partition userdata...
Rawprogram write failed!
Writing Firmware Failed
Rebooting phone
Backup saved as NOKIA_TA-1011_12-02-2020_19-08-23.dump file
Performed by 1.8.6.0 Software version.

Here DUMP File:https://www.mediafire.com/file/55xy1...8-23.dump/file


Note:Before Flashing Mobile Was Hang On LOGO But Now Mobile Totally DEAD So Please Solve My Problem & Nothing Show Any Action In Device Manager


So Please Solve My Problem


Thanks & Regards By:All TECH 4 You
 

All TECH 4 You

Friend's Martview
Feb 26, 2019
673
288
Ahemdabad,Gujrat
& Many Time This Error Come Not Write Firmware:


Platform: NOKIA
Selected model: TA-1011
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don’t turn off phone and don’t disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage.
Put the phone into EDL mode:
  1. Attach testpoint as shown in Help manual;
  2. Connect USB cable;
  3. Release testpoint after 3-5 seconds.
Found phone on COM292
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 009600E100000000
QC CPU: Snapdragon 210 MSM8909
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Writing firmware...
Selected firmware files:
H:\Chinese Firmware\Nokia\Nokia 2 TA-1011\E1M-0680-0-00WW-B02.nb0.7z\E1M-0680-0-00WW-B02.nb0\E1M-0680-0-00WW-B02.nb0
Rebooting phone
Backup saved as NOKIA_TA-1011_12-02-2020_19-54-42.dump file
Performed by 1.8.6.0 Software version.

Please Help Me Because Now Mobile Totally DEAD Before Write Firmware HANG On LOGO if Have Any TESTED Firmware Please Upload Here

Thanks &Regards By:All TECH 4 You
 

imphal mobile

Friend's Martview
Nov 11, 2019
101
30
i had face similar issue.. but i extract file from alive phone of same model n flash .. ..


Sent From MI MAX Using Martview Forum App
 

Franky38

Product Supporter
Jul 28, 2018
1,823
2,158
PayPal:

Donate money to this user
Good, within the nokia 2 family there are three models, TA 1035, TA1029, TA1011, if I'm not mistaken for that, the error comes from the firmware downloaded by the user All TECH 4 You belongs to nokia 2 1029, apart from there may be failures, errors, bugs in the software, anyway try this firmware a priori is TA-1011.

Link Firmware: StackPath
 

Attachments

  • Password Nokia 2 TA-1011.txt
    15 bytes · Views: 69
Last edited:
Top