NOKIA C2 FLASH DONE WITH BEST

Faizan siddiqui

Friend's Martview
Apr 3, 2017
199
115
Karachi pakistan
Skype
[email protected]
LOGS

Code:
Phone found!
Series 40 Device detected!
read info...  - Ok

Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm704__03.82.mcusw
PPM : rm704__03.82.ppm_m_a
CNT : rm704__03.82.image_m_a_magenta_059C1L7
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
->  Check SW version...
FlashFile version : 03.82
Phone version : 03.42 11-05-11 RM-704 (c) Nokia           
->  Check SW version : Upgrade
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Check communication with phone...
Batery voltage : 3681 mV
-> Batery voltage less, than 3,7V (3681mV). Continue at user risk
Reboot....

-> If Phone start charge - just reinsert battery fast

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.44_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm704__03.82.mcusw
Image : rm704__03.82.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:05
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01940000
Erasing, wait ...
Erase done, time : 00:02:11
Write , Start : 0x40280000 , Len : 0x018C0000
Flashing , wait ...
Region flash done, time : 00:00:36
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0xE70B

   ===Flashing [PPM]===
File : rm704__03.82.ppm_m_a
Image : package_m_a.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41BC0000 , Len : 0x00600000
Erasing, wait ...
Erase done, time : 00:00:18
Write , Start : 0x41BC0000 , Len : 0x003479DC
Flashing , wait ...
Region flash done, time : 00:00:04
CRC check passed , 0xBFB8

   ===Flashing [CNT]===
File : rm704__03.82.image_m_a_magenta_059C1L7
Image : package_m_a_magenta_059C1L7.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x421C0000 , Len : 0x01C60000
Erasing, wait ...
Erase done, time : 00:05:07
Write , Start : 0x421C0000 , Len : 0x009E0000
Flashing , wait ...
Region flash done, time : 00:00:17
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:09
No write data, skip
CRC check passed , 0x495E

Flashing done!
Total flash time : 00:08:56
Reboot phone now...

Reading Phone Info....
Connected phone -   C2-00
Software Info:     V 03.82 17-10-11 RM-704 (c) Nokia           
IMEI:  357415042292804
PPM version :   V 03.82 17-10-11 RM-704 (c) Nokia             M_A
Product code:  059J4Z7
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 42 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:09:48
Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info...  - Ok

Set phone in Normal mode...
Restarting...
Done!

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Phone disconected!

Connect phone on selected interface...
 
Top