oppo A1K cph1923 dead after format and dead boot repair done. no tension very simjple by great UFI BOX

salim sadman

Active Member
Aug 20, 2019
26
7
Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number:
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QD63MB (0x514436334d42), rev: 0x03, serial number: 0x72F00665
Manufacturing date: Aug 2019
CID: 15010051 4436334D 420372F0 066586CC
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: OPPO
board: oppo6762_18540, name: CPH1923
brand: OPPO, model: CPH1923 (OPPO A1k)
build model list: CPH1923 (OPPO A1k)
build id: PPR1.180610.011, version: 9 Pie (CPH1923EX_11_A.26)
build description: full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20200105.204639 release-keys

crypto state: encrypted?
crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMQD60003M-BXXX/32G




salim sadman
 
Top