Selected model: OPPO CPH2015 (OPPO A31)
Operation: Repair
Software version: 6.2
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM4 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM4 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xF17C4404, 0xAC3B5347, 0xDCE03CD8, 0x591976F8
Get Chip ID... [MT6765]
Get SOC ID... [730C6EEC433121A0FBD6C2411CA27045ED6404B2AE0DE4EAB5565B5DD0218357]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A68433961503301005EBE054773
Load EMI config from database [DB VER: 222 DB DATE: 11-13-2023] OK [1]
Trying EMI [B772E8DA, F83EEC01, 703B5CDE, 4ECF8C5A, 7805E65B, D8F5BD39, 4C76F2A3, C41C94FB, 72ECA8F6, F1ADA01B, AD4E4796, 88F176AB]
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hC9aP3
EMMC_ID : 0x90014A68433961503301005EBE054773
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH2015
Product Name : CPH2015
Product Device : OP4C7D
Product Board : oppo6765_19581
Board Platform : mt6765
Build ID : PPR1.180610.011
Build Date : Tue Mar 9 21:00:49 CST 2021
Display ID : CPH2015EX_11_A.51
Security Patch : 2021-03-05
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : 1615295277
Userdata FS Type : EXT4
Read partition "nvdata"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Repairing IMEI...
IMEI 1: 352094567247843
IMEI 2: 352094567247868
Write IMEI and patch CERT [NVDATA]... OK
Checking patch type... [1]
Patching partition... OK
Save patched partiton... OK
Selected "Auto unlock bootloader"
Read security partition from phone... OK
Decrypting security data... OK
Encrypt security data... OK
Write security partition to phone... OK
Checking additional lock... [DISABLED]
Write IMEI and patch CERT [NVRAM]... OK
Write partition "nvdata"... OK
Repair Security and Patch cert done!
If your phone after repair keeps rebooting - use wipe data option.
Operation: Repair
Software version: 6.2
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM4 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM4 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xF17C4404, 0xAC3B5347, 0xDCE03CD8, 0x591976F8
Get Chip ID... [MT6765]
Get SOC ID... [730C6EEC433121A0FBD6C2411CA27045ED6404B2AE0DE4EAB5565B5DD0218357]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A68433961503301005EBE054773
Load EMI config from database [DB VER: 222 DB DATE: 11-13-2023] OK [1]
Trying EMI [B772E8DA, F83EEC01, 703B5CDE, 4ECF8C5A, 7805E65B, D8F5BD39, 4C76F2A3, C41C94FB, 72ECA8F6, F1ADA01B, AD4E4796, 88F176AB]
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hC9aP3
EMMC_ID : 0x90014A68433961503301005EBE054773
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH2015
Product Name : CPH2015
Product Device : OP4C7D
Product Board : oppo6765_19581
Board Platform : mt6765
Build ID : PPR1.180610.011
Build Date : Tue Mar 9 21:00:49 CST 2021
Display ID : CPH2015EX_11_A.51
Security Patch : 2021-03-05
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : 1615295277
Userdata FS Type : EXT4
Read partition "nvdata"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Repairing IMEI...
IMEI 1: 352094567247843
IMEI 2: 352094567247868
Write IMEI and patch CERT [NVDATA]... OK
Checking patch type... [1]
Patching partition... OK
Save patched partiton... OK
Selected "Auto unlock bootloader"
Read security partition from phone... OK
Decrypting security data... OK
Encrypt security data... OK
Write security partition to phone... OK
Checking additional lock... [DISABLED]
Write IMEI and patch CERT [NVRAM]... OK
Write partition "nvdata"... OK
Repair Security and Patch cert done!
If your phone after repair keeps rebooting - use wipe data option.
