- Mar 9, 2019
- 30
- 8
Pinout sirOppo A7 Cph-1901 Remove Pin Lock And Frp Lock Done With Ufi-Box Offline Work
Remove User-Lock/Pin Lock
Remove Frp Lock
Ufi-Log Model Detail
After Remove Lock Set Working Fine
oppo a7 isp pinout
- Thread starter Ghanshyam
- Start date
Deepesh Sharma
Friend's Martview
sir im just a newbee do you have other photos that has exact point on?
pardon me i just need exact point like i said im begener i dont want to kill a phone -_-
pardon me i just need exact point like i said im begener i dont want to kill a phone -_-
pls help me, current oppo A7 CPH 1905 device dont read eMMC with boX UFI.
pls give solutions:
Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-7178
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RH64AB (0x524836344142), rev: 0x05, serial number: 0x18F8688B
Manufacturing date: Dec 2018
CID: 15010052 48363441 420518F8 688BC51A
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Factory Reset...
Creating filesystem with parameters:
Size: 268435456
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 65536
Block groups: 2
Reserved block group size: 15
Created filesystem with 13/16384 inodes and 2091/65536 blocks
Writing cache... Wrote 70549436 blocks, expected to write 65536 blocks
Done
Creating filesystem with parameters:
Size: 56119767040
Block size: 4096
Blocks per group: 32768
Inodes per group: 8176
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 13701115
Block groups: 419
Reserved block group size: 1024
Created filesystem with 11/3425744 inodes and 261095/13701115 blocks
Writing userdata... Unknown chunk type 0x0000 at 0x00E0F0C4
Wrote 50411258 blocks, expected to write 13701115 blocks
Done
Done
pls give solutions:
Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-7178
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RH64AB (0x524836344142), rev: 0x05, serial number: 0x18F8688B
Manufacturing date: Dec 2018
CID: 15010052 48363441 420518F8 688BC51A
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Factory Reset...
Creating filesystem with parameters:
Size: 268435456
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 65536
Block groups: 2
Reserved block group size: 15
Created filesystem with 13/16384 inodes and 2091/65536 blocks
Writing cache... Wrote 70549436 blocks, expected to write 65536 blocks
Done
Creating filesystem with parameters:
Size: 56119767040
Block size: 4096
Blocks per group: 32768
Inodes per group: 8176
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 13701115
Block groups: 419
Reserved block group size: 1024
Created filesystem with 11/3425744 inodes and 261095/13701115 blocks
Writing userdata... Unknown chunk type 0x0000 at 0x00E0F0C4
Wrote 50411258 blocks, expected to write 13701115 blocks
Done
Done
