Legitunlocks.com
Martview FX-01 Multifunctional

Oppo F11 CPH1969 MTK Port Only after Wipe Data only

gsmfazal

gsmfazal

Active Member
Feb 28, 2017
25
5
Swat
Hello Team.

I have Oppo F11 CPH1969 Screen Lock. First time i open this model i mean i bricked the warranty sticker before it was cell pack. After Wipe Data Only and FRP Reset when i remove ISP pinouts mobile show only MTK PORT..
I double check points may short with ground but looks like good then i again attached isp pinouts and checked.... Here is the screen shot after Wipe data only ..
Looks like every thing okay but still mobile MTK PORT Only .. Please Team Help..

17405
 
gsmfazal

gsmfazal

Active Member
Feb 28, 2017
25
5
Swat
Ahmadaim1 said:
Send log here
Click to expand...
Interface: UFI High-Speed
Serial number: 0011-8841-6726
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hC8aP (0x68433861503e), rev: 0x03, serial number: 0x6180AAAD
Manufacturing date: Jan 2019
CID: 90014A68 43386150 3E036180 AAAD164C
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 2 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: MT6771, cpu abi: arm64-v8a
manufacturer: OPPO
board: oppo6771_18531, name: CPH1969
brand: OPPO, model: CPH1969 (OPPO F11 Pro)
build model list: CPH1985 (OPPO R15), CPH1987 (OPPO F11 Pro), CPH1969 (OPPO F11 Pro)
build id: PPR1.180610.011, version: 9 Pie (CPH1969EX_11_A.23)
build description: full_oppo6771_18531-user 9 PPR1.180610.011 eng.root.20190824.180751 release-keys
crypto state: encrypted?
crypto state: encrypted?
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-6726
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hC8aP (0x68433861503e), rev: 0x03, serial number: 0x6180AAAD
Manufacturing date: Jan 2019
CID: 90014A68 43386150 3E036180 AAAD164C
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 2 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: MT6771, cpu abi: arm64-v8a
manufacturer: OPPO
board: oppo6771_18531, name: CPH1969
brand: OPPO, model: CPH1969 (OPPO F11 Pro)
build model list: CPH1985 (OPPO R15), CPH1987 (OPPO F11 Pro), CPH1969 (OPPO F11 Pro)
build id: PPR1.180610.011, version: 9 Pie (CPH1969EX_11_A.23)
build description: full_oppo6771_18531-user 9 PPR1.180610.011 eng.root.20190824.180751 release-keys
crypto state: encrypted?
crypto state: encrypted?

Also i upload screen short sir.
 
gsmfazal

gsmfazal

Active Member
Feb 28, 2017
25
5
Swat
This are the first log when i master clear and frp reset.

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-6726
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hC8aP (0x68433861503e), rev: 0x03, serial number: 0x60339ECE
Manufacturing date: Feb 2019
CID: 90014A68 43386150 3E036033 9ECE2658
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
MasterClear [1]... Done
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-6726
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hC8aP (0x68433861503e), rev: 0x03, serial number: 0x60339ECE
Manufacturing date: Feb 2019
CID: 90014A68 43386150 3E036033 9ECE2658
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Clear FRP Lock... Done
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-6726
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hC8aP (0x68433861503e), rev: 0x03, serial number: 0x60339ECE
Manufacturing date: Feb 2019
CID: 90014A68 43386150 3E036033 9ECE2658
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 2 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: MT6771, cpu abi: arm64-v8a
manufacturer: OPPO
board: oppo6771_18531, name: CPH1969
brand: OPPO, model: CPH1969 (OPPO F11 Pro)
build model list: CPH1985 (OPPO R15), CPH1987 (OPPO F11 Pro), CPH1969 (OPPO F11 Pro)
build id: PPR1.180610.011, version: 9 Pie (CPH1969EX_11_A.41)
build description: full_oppo6771_18531-user 9 PPR1.180610.011 eng.root.20191225.044603 release-keys
crypto state: encrypted?
crypto state: encrypted?
 
Ankit_Davgar

Ankit_Davgar

Friend's Martview
Jun 23, 2020
159
85
India
Skype
davgarankit
PayPal:

Donate money to this user
check commoponents sonething wrong with that if not then you have to flash your phone through ufi
 
Ankit_Davgar

Ankit_Davgar

Friend's Martview
Jun 23, 2020
159
85
India
Skype
davgarankit
PayPal:

Donate money to this user
write twsted EXT CSD.
A case happened to me as well.then i flashed the dump file.the device did not turn on.then after that i flash official file still did not turn on, after that i flashed EXT CSD set to On.
 
gsmfazal

gsmfazal

Active Member
Feb 28, 2017
25
5
Swat
Ankit_Davgar said:
write twsted EXT CSD.
A case happened to me as well.then i flashed the dump file.the device did not turn on.then after that i flash official file still did not turn on, after that i flashed EXT CSD set to On.
Click to expand...
Bro EXT CSD file write when device not boot enable ..
 
Ankit_Davgar

Ankit_Davgar

Friend's Martview
Jun 23, 2020
159
85
India
Skype
davgarankit
PayPal:

Donate money to this user
but we can try if something happen with sometime its shows but nothing happen some corruption in device
 
Ahmadaim1

Ahmadaim1

Product Supporter
Aug 10, 2018
207
113
Nigeria
Try to check ur PCB under microscope zoom sometimes tiny line break but u can see it with ur physical eyes
 
You must log in or register to reply here.
Top