Welcome to Medusa Pro Software version 2.1.1.
Started.
Reader #0: Generic EMV Smartcard Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
ERROR[001]: Can not connect. No target device present.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC hC8aP
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A68433861503E0361681EF916D5
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : hC8aP
Product revision : 0.3
Product serial number : (hex) 61681EF9
Manufacturing date : 01/2019
---------------------------------------------------------------
CSD Info
CSD : D02700328F5903FFFFFFFFEF8E400043
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 8Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x02) 00000010
Boot bus width : x8 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 30531584 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/hC8aP_25_07_2020_15_14_47.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.1; FW: 1.24.
P00: GPT (00000000, 00000040) 32 KB
P01: boot_para (00000040, 00000800) 1024 KB
P02: recovery (00000840, 00020000) 64 MB
P03: para (00020840, 00000400) 512 KB
P04: opporeserve1 (00020C40, 00004000) 8 MB
P05: opporeserve2 (00024C40, 00020000) 64 MB
P06: opporeserve3 (00044C40, 00020000) 64 MB
P07: oppo_custom (00064C40, 00000800) 1024 KB
P08: expdb (00065440, 0000A000) 20 MB
P09: frp (0006F440, 00000800) 1024 KB
P10: nvcfg (0006FC40, 00010000) 32 MB
P11: nvdata (0007FC40, 00020000) 64 MB
P12: metadata (0009FC40, 00010000) 32 MB
P13: protect1 (000AFC40, 00004000) 8 MB
P14: protect2 (000B3C40, 000043C0) 8.469 MB
P15: seccfg (000B8000, 00004000) 8 MB
P16: persist (000BC000, 00018000) 48 MB
P17: sec1 (000D4000, 00001000) 2048 KB
P18: proinfo (000D5000, 00001800) 3072 KB
P19: md1img (000D6800, 00032000) 100 MB
P20: spmfw (00108800, 00000800) 1024 KB
P21: scp1 (00109000, 00003000) 6 MB
P22: scp2 (0010C000, 00003000) 6 MB
P23: sspm_1 (0010F000, 00000800) 1024 KB
P24: sspm_2 (0010F800, 00000800) 1024 KB
P25: cam_vpu1 (00110000, 00007800) 15 MB
P26: cam_vpu2 (00117800, 00007800) 15 MB
P27: cam_vpu3 (0011F000, 00007800) 15 MB
P28: gz1 (00126800, 00008000) 16 MB
P29: gz2 (0012E800, 00008000) 16 MB
P30: nvram (00136800, 00020000) 64 MB
P31: lk (00156800, 00002800) 5 MB
P32: lk2 (00159000, 00002800) 5 MB
P33: boot (0015B800, 00010000) 32 MB
P34: logo (0016B800, 00008000) 16 MB
P35: dtbo (00173800, 00008000) 16 MB
P36: tee1 (0017B800, 00002800) 5 MB
P37: tee2 (0017E000, 00006000) 12 MB
P38: odm (00184000, 00080000) 256 MB
P39: vendor (00204000, 00218000) 1072 MB
P40: system (0041C000, 00A68000) 5.203 GB
P41: cache (00E84000, 000D8000) 432 MB
P42: userdata (00F5C000, 065027DF) 50.5 GB
P43: otp (0745E7DF, 00015800) 43 MB
P44: flashinfo (07473FDF, 00008000) 16 MB
Backuping nvdata partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/hC8aP_nvdata_0x7fc40_0x20000_25_07_2020_15_14_47.bin file...
Reading. Please wait...
ERROR[011]: Read error.
Attempting to read...
Done.
Elapsed time 00:00:39
SW: 2.1.1; FW: 1.24.
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 8f800000 bytes
Device sector size : 512 bytes
Partition offset : 4308992
Number of sectors : 10911744
Build ID : PPR1.180610.011
Release ID : 9
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : full_oppo6771_18531-user 9 PPR1.180610.011 eng.root.20191225.044603 release-keys
---------------------------------------------------------------Reset operation finished
Backuping FRP data...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/FRP_0x6f440_0x800_25_07_2020_15_15_43.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.1.1; FW: 1.24.
Removing FRP. Please wait... Done.
SW: 2.1.1; FW: 1.24.
