Oppo f11 pro cph1969 come in security lock just download the isp pinouts and make jumpars with ufi isp adapter and clear oppo master lock with ufi box finally job done
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-7268
Boot version: 1.05, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (HS SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hDEaP3 (0x684445615033), rev: 0x03, serial number: 0x1F0300F4
Manufacturing date: Mar 2003
CID: 90014A68 44456150 33031F03 00F436DA
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
EXT_CSD revision: 1.255 (MMC )
Partition info:
Boot1: 32640 KiB (enhanced)
Boot2: 32640 KiB (enhanced)
RPMB: 32640 KiB (enhanced)
User area: -512 bytes(33,423,360 bytes) (enhanced)
GP1: 255.50 MiB (enhanced)
GP2: 255.50 MiB (enhanced)
GP3: 255.50 MiB (enhanced)
GP4: 255.50 MiB (enhanced)
Hardware reset function: 255
Partition configuration: 0xFF
Boot acknowledge is sent during the boot operation
User area is enabled for boot
Partitioning support: 0xFF
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0xFF
Change of boot configuration register bits relating boot mode operation is permanently disabled.
Boot bus conditions: 0xFF
reserved, boot mode: reserved, retain bus width and boot mode
Boot area write protection: 0xFF
Power-on write protection: not possible
Permanent write protection: not possible
Lock status: locked until next power on
User area write protection: 0xFF
Password protection features: disabled
Power-on write protection: not possible
Permanent write protection: not possible
Lock status: locked until next power on
Invalid sector count.
Failed to switch partition to 0, error code: 36
CMD8 error, cmd response: 0x900, card state: 4 (Card is in transfer state)
status: unknown (0)
--- Try to decrease the clock speed ---
plz help
20200319_114721.jpg
20200319_121631.jpg
IMG-20200319-WA0009.jpeg
proxy.php.png