Oppo Tool Guide Flash Tool Use Qualcomm Chips
**************************************
***********************************
Driver: Driver_Qualcomm_Oppo.rar
******************************************
--------------------------------------------------
-Unzip the download and run the file Rom Msm8x39DownloadTool.exe (If error, then install the NET Framework 4.0 offline)
- Select Model number corresponding to the file name gpt_main0_partition_msm_xxxxx.xml.bin (rom files in the directory, is xxxxx Phone model number). Then select OK (Depending on the ROM that k steps or offline)
- Select Verify (as shown below) and then wait one tool it's time to check
- When the tool press OK as shown below is offline.
- Mark as shown below, then select Start
- Turn off the phone (should remove the battery, insert it again if possible), hold down (Volume +) and connected to the computer. This time on the tool bar appeared blue run away, just keep quiet buttons (Volume +) for the blue bar running 4 to 5 times and then let go of the button (Volume +) out
- Wait until the word blue USB stand is completed unbrick:
- When finished running and then wait 10 seconds before unplugging cables reach and hold the power button 15-30s when the vibrator 1 is.
DownloadTool_1612.8 By Jamil Mobile
Pass
**************************************
***********************************
Driver: Driver_Qualcomm_Oppo.rar
******************************************
--------------------------------------------------
-Unzip the download and run the file Rom Msm8x39DownloadTool.exe (If error, then install the NET Framework 4.0 offline)
- Select Model number corresponding to the file name gpt_main0_partition_msm_xxxxx.xml.bin (rom files in the directory, is xxxxx Phone model number). Then select OK (Depending on the ROM that k steps or offline)
- Select Verify (as shown below) and then wait one tool it's time to check
- When the tool press OK as shown below is offline.
- Mark as shown below, then select Start
- Turn off the phone (should remove the battery, insert it again if possible), hold down (Volume +) and connected to the computer. This time on the tool bar appeared blue run away, just keep quiet buttons (Volume +) for the blue bar running 4 to 5 times and then let go of the button (Volume +) out
- Wait until the word blue USB stand is completed unbrick:
- When finished running and then wait 10 seconds before unplugging cables reach and hold the power button 15-30s when the vibrator 1 is.
DownloadTool_1612.8 By Jamil Mobile
Pass
Last edited:
