Z3X Pandora 9.10 NEW Release

[GsmToto]

Selected model: Huawei MRD-LX2 (Huawei Y6 Pime)
Operation: Erase FRP And Wipe
Software version: 9.6
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM4 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM4 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xF93A43AE, 0x14242203, 0xCF322F4F, 0x0280B386
Get Chip ID... [MT6761]
Get SOC ID... [1BDFA4A98239C203E25368A30B8DCEF0F6CFAA29275C9BF1A3 E284B3D6D9836C]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100514436334D4201DD2468EE4607
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: QD63MB
EMMC_ID : 0x150100514436334D4201DD2468EE4607
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 50% - 60% device life time used
DeviceLifeTimeEstB: 50% - 60% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... error(3)
Read partition "frp"... OK
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... [P1] OK
Formatting "cache" partition... [P1] OK
Wipe data done!

 

[GsmToto]

Selected model: Huawei MRD-LX2 (Huawei Y6 Pime)
Operation: Erase FRP And Wipe
Software version: 9.6
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xF93A43AE, 0x14242203, 0xCF322F4F, 0x0280B386
Get Chip ID... [MT6761]
Get SOC ID... [1BDFA4A98239C203E25368A30B8DCEF0F6CFAA29275C9BF1A3 E284B3D6D9836C]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100514436334D4201DD2468EE4607
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: QD63MB
EMMC_ID : 0x150100514436334D4201DD2468EE4607
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 50% - 60% device life time used
DeviceLifeTimeEstB: 50% - 60% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... error(3)
Read partition "frp"... OK
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... [P1] OK
Formatting "cache" partition... [P1] OK
Wipe data done!

 

[GsmToto]

Selected model: Samsung SM-A035M (Samsung Galaxy A03 )
Operation: Erase FRP And Wipe
Software version: 9.7


Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM7
Port: USB\VID_1782&PID_4D00\5&9D182E4&0&6
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T606_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 82322C6Y0093E
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A035M
Product Name : a03ub
Product Device : a03
Product Board : ums9230_25c10
Board Platform : ums9230
Build ID : RP1A.200720.012
Build Date : Wed Mar 6 22:31:00 KST 2024
Firmware Version : A035MUBS6CXC1
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "persistent" partition... OK
Formatting "userdata" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!

 

[msjabar]

Selected model: Samsung SM-A346E (Samsung Galaxy A34 5G)
Operation: Erase FRP
Software version: 9.6
Work ID: 91642773

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM36 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0959
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM36 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0959
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x4034144F, 0x90F9CC5A, 0x5F479C07, 0x79121902
Get Chip ID... [MT6877]
Get SOC ID... [03A78B148298ECE070F2465CFB488E39FE6AB23468FB954AF1EC4BDCD477190F]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [17]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): KM2L9001CM-B518 (0004)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : KM2L9001CM-B518
UFS_FWVER : 0004
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0180000000 (6.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A346E
Product Name : a34xdxx
Product Device : a34x
Product Board : a34x
Board Platform : mt6877
Build ID : SP1A.210812.016
Build Date : Mon May 26 21:22:24 KST 2025
Firmware Version : A346EXXS9CYD1
Userdata FS Type : F2FS
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-A346E%20(Samsung%20Galaxy%20A34%205G)/FRP_BACKUP_(2025-9-30_12-6-49)/
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Erase FRP done!

 

[belaidabed02]

Lenovo TB520FU (Lenovo Yoga Tab Plus) Failed


Selected model: Lenovo TB520FU (Lenovo Yoga Tab Plus)
Operation: Read Flash Info
Software version: 9.7

Waiting for device... OK
Device found at COM41
Port: Quectel QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 3260529199
Sahara ver: 3
OEM PK HASH: 2B0048B31B5BF1385A014E02E93DB15849C331E3DE3407A22DA33295998A7AF4BBA83C57E9EC37FE6B06765DF81C2276
CPU: 002280E1
Vendor: Lenovo
MSM HW ID: 002280E100400000
Prepare loader file... OK
Loader hash: 0CA702927EFCD120471028891471A892FAC258F4
Loader PK hash: 2B0048B31B5BF1385A014E02E93DB15849C331E3DE3407A22DA33295998A7AF4BBA83C57E9EC37FE6B06765DF81C2276
Loader version: 7.0
Sending loader... error(4.1)

 

[GsmToto]

Selected model: Vivo PD2139IF (Vivo Y21 (2021))
Operation: Erase FRP And Wipe
Software version: 9.7
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x063026AD, 0x040EA76F, 0xAAFA7E36, 0xEC05D9C6
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
DA2 auth: disabled
Get device info... OK
EMMC INFO:
EMMC_CNAME: DP6DBB
EMMC_ID : 0x15010044503644424202A91FCABDA88F
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2149
Product Name : 2149
Product Device : 2149
Product Board : k62v1_64_bsp
Board Platform : mt6765
Build ID : SP1A.210812.003
Build Date : Mon Jan 6 15:05:02 CST 2025
Display ID : PD2139JF_EX_A_12.1.10.0.W20.V000L1
Security Patch : 2025-01-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : compiler01061507
Userdata FS Type : EXT4
Read partition "frp"... OK
Format FRP... [P3] OK
Formatting "userdata" partition... [P3] OK
Formatting "cache" partition... [P3] OK
Formatting "metadata" partition... [P3] OK
Formatting "md_udc" partition... [P3] OK
Wipe data done!

 

[GsmToto]

Selected model: Tecno KF6n (Tecno Spark 7)
Operation: Disable Orange State
Software version: 9.7

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM5 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xAE19E225, 0x1873E38B, 0x2DE542E9, 0x3C22A0E7
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DP6DAB
EMMC_ID : 0x15010044503644414202DB52CED5A841
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x0E8F800000 (58,24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO KF6n
Product Name : KF6n-RU
Product Device : TECNO-KF6n
Product Board : TECNO-KF6n
Board Platform : mt6765
Build ID : RP1A.200720.011
Build Date : Fri May 5 11:39:03 CST 2023
Display ID : TECNO-R-64-230504V467
Security Patch : 2023-05-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 230505V143
Userdata FS Type : F2FS
Checking disable possiblity... OK [POSSIBLE WITH BOOT UNLOCK]
Disable orange state... OK
Disable orange state done!

 

[GsmToto]

Selected model: Tecno CH6T (Tecno Camon 18T)
Operation: Repair
Software version: 9.7

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xC47CCF42, 0x2FB17488, 0xC0FBA7BC, 0x1111CF1A
Get Chip ID... [MT6768]
Get SOC ID... [7FE8E37BE96909C30AFED960820B1E921BC67A121FE98FFC0C F2294E6E1DD19D]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100445636444142028F22DC1E78A6
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DV6DAB
EMMC_ID : 0x150100445636444142028F22DC1E78A6
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1EC00000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO CH6h
Product Name : CH6h-AS
Product Device : TECNO-CH6h
Product Board : TECNO-CH6h
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Wed Oct 11 17:35:03 CST 2023
Display ID : TECNO-S-64-231011V439
Security Patch : 2023-10-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 231011V656
Userdata FS Type : F2FS
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Read IMEI... OK
IMEI: 350000000000000
Repairing IMEI...
IMEI: 35000000000000
Write IMEI [NVDATA]... OK
Write IMEI [NVRAM]... OK
Write partition "nvdata"... OK
Write partition "nvram"... OK
Repair Security done!

 

[aliipi]

pandora tea in hybernate mode i think no update for infinix techno itel vivo redmi xioumi 2025 security.

 

[GSM YOUSAF]

add latest

 

[GsmToto]

Selected model: Infinix X689F (Infinix Hot 11)
Operation: Erase FRP And Wipe
Software version: 9.8
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x1DDD46B1, 0xE7E51586, 0x406122EF, 0x5CBB597D
Get Chip ID... [MT6765]
Get SOC ID... [F73B29B3E0138C6ABDA349A1373DE8AD4908AF6B451CE17DB6 D09793D5200221]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010044503644414202BA3A6A8478D1
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DP6DAB
EMMC_ID : 0x15010044503644414202BA3A6A8478D1
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 20% - 30% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX MOBILITY LIMITED
Product Model : Infinix X688B
Product Name : X688B-GL
Product Device : Infinix-X688B
Product Board : Infinix-X688B
Board Platform : mt6765
Build ID : RP1A.200720.011
Build Date : Fri Mar 24 20:50:43 CST 2023
Display ID : X688B-H659ABCDEFGHIJKLMNO-R-GL-230324V865
Firmware Version : 230324V619
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_X689F%20(Infinix%20Hot%2011)/FRP_BACKUP_(2025-10-25_21-5-33)/
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... [P1] OK
Formatting "cache" partition... [P1] OK
Formatting "metadata" partition... [P1] OK
Formatting "md_udc" partition... [P1] OK
Wipe data done!

 

[GsmToto]

Selected model: Oukitel C51
Operation: Erase FRP
Software version: 9.8

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM5
Port: USB\VID_1782&PID_4D00\5&2A74FA45&0&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T612_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: C51000000050000
Flash Type: UFS
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : OUKITEL
Product Manufacturer : OUKITEL
Product Model : C51
Product Name : C51_U_EEA
Product Device : C51
Product Board : ums9230_6h10
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Fri Feb 28 19:42:15 CST 2025
Display ID : OUKITEL_C51_U_EEA_V16_28022025
Security Patch : 2025-02-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 20250228
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[asad10]

View attachment 79412

Pandora 9.8 Release

Please login to view image

Please login to view image

Please login to view image

Added support new MTK phones (new method)
(latest security not supported !!!)
MOTOROLA Moto G72 4G XT2255-1, XT2255-2, XT2255-3
Oppo Find N3 Flip CPH2519, PHT110
Oppo Find X6 PGFM10
Oppo Find X7 PHZ110
Reno12 Pro PJW110
VIVO X90 PD2241F
VIVO iQOO Neo 8 Pro PD2302
VIVO X100 5G PD2309
VIVO S18 Pro PD2344
VIVO V40 Pro PD2362F
VIVO iQOO Z9 Turbo Plus PD2417
TCL Tab 10 NxtPaper 5G 9199S
TCL 50 XL 5G T702W

Please login to view image

Added support Mediatek devices
Blackview BL9000 Pro, BV7300, BV8100, BV8200, Tab 10 WiFi, Active 7, Color 6, Oscal Pilot 1,
Oscal Spider 10, Hero 10, Mega 1, Oscal Elite 1
Nothing Phone 1, Phone 2 Pro, Phone 2A, Phone 2A Plus

Please login to view image

Added support Unisoc devices
Blackview BV4800 Pro, Wave 8, Tab 9 WiFi, Tab 90, Tab 60 Pro, Tab 60 Pro Kids, Tab 80 Kids,
Wave 8C, BV6200 Plus, Tab 20 Kids, Tab 20 WiFi, Oscal Pad 30 WiFi, Oscal Flat 2, Oscal Pad 5,
Oscal Pad 90, Oscal Pad 9
Doogee Blade 10 Max, Fire 6, Fire 6 Power, S Punk Pro, T10W, T30SE, Tab A9, Tab A9 Pro, U11 Pro
Hisense E20, E20S, E32 Lite, U60, U965 2024, U71 Pro, Y81 Pro, F30S, U50, E50s, U965 2020,
U962 2019, U71, U61, U70, U50 3G, U41 Lite, U601, E34, E70 Pro, E71

Please login to view image

Fixed some bugs
MEGA: https://mega.nz/file/SF0xHY7D...

where is anticreak where is meta frp reset 2025 you always slower loser team

 

[GsmToto]

Selected model: Itel A661W (Itel A58)
Operation: Erase FRP And Wipe
Software version: 9.8

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM12
Port: USB\VID_1782&PID_4D00\5&227DB1D&0&3
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC7731E
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Itel
Product Manufacturer : ITEL MOBILE LIMITED
Product Model : itel P661W
Product Name : P661W
Product Device : P661W
Product Board : P661W
Board Platform : sp7731e
Build ID : RP1A.201005.001
Build Date : Sat Mar 26 16:08:14 WIB 2022
Display ID : P661W-F3120-11.0-OP-V034-20220326
Security Patch : 2022-03-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 275
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!

 

[Saaquib124]

VIVO V40 PRO UNLOCK FAILS IN PANDORA NEW UPDATE

Selected model: Vivo PD2417 (Vivo iQOO Z9 Turbo Plus)
Operation: Erase FRP
Software version: 9.8

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1296
Get sec config... error
Detect chip [MT0000]
Library Version [2]
Select platform... error

 

[Saaquib124]

VIVO X100 UNLOCK FAILS IN PANDORA NEW UPDATE


Selected model: Vivo PD2309 (Vivo X100 Pro)
Operation: Flash (Download only)
Software version: 9.9
If BROM was disabled and you want write preloader partition not compatible for this model, phone will bricked. Recovery possible only with ISP mode.
Continue? YES

Parse scatter file... OK
Load Rom Images... OK
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1236
Get sec config... error
Detect chip [MT0000]
Library Version [2]
Select platform... error

 

[arumarzia]

Add new mtk & add vivo new security

 

[GsmToto]

Selected model: Infinix X6525 (Infinix Smart 8)
Operation: Erase FRP And Wipe
Software version: 9.9

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\6&234F0BFF&0&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 12271334A5001778
Flash Type: EMMC
Read partitions info... error
Backup partitions...
Read partitions info... OK OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: EXT4] ... OK
Done!

 

[GsmToto]

Selected model: OPPO CPH1909 (OPPO A5s)
Operation: Erase FRP And Wipe
Software version: 9.9
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xD576968B, 0x5D381BF3, 0x2051666A, 0x9A1AE382
Get Chip ID... [MT6765]
Get SOC ID... [0C2532A6080850813D8DA5213B9A8C5DB76BE5B8DDE276EF07 CA7C5BB6CDAF24]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A68423861503E03AC2656AA86BF
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hB8aP>
EMMC_ID : 0x90014A68423861503E03AC2656AA86BF
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: info not available
DeviceLifeTimeEstB: 60% - 70% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : OPPO A5s
Product Name : CPH1909
Product Device : CPH1909
Board Platform : mt6765
Build ID : O11019
Build Date : Fri Mar 19 19:50:28 CST 2021
Display ID : CPH1909EX_11_A.46
Security Patch : 2021-04-05
Version SDK : 27
Version Release : 8.1.0
Version Codename : REL
Firmware Version : 1616154627
Userdata FS Type : EXT4
Read partition "frp"... OK
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... [P1] OK
Formatting "cache" partition... [P1] OK
Formatting "metadata" partition... [P1] OK
Wipe data done!

 

[deedar dda]

plz z3x team add vivo new security