Z3X Pandora PRO 8.7/ 8.8 Released. New Samsung added

[Alijaan]

plz up date oppoo vivio new secutity patch

 

[an.khan143]

oppo a72 working ?

 

[msjabar]

Selected model: Xiaomi 11 Lite 5G NE (Lisa)
Operation: Erase FRP
Software version: 8.8
Work ID: 69893743

Waiting for device... OK
Device found at COM35
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 254528466
Sahara ver: 2
OEM PK HASH: 1BEBE3863A6781DB4B01086063007334DE9E5CA14971C7C4F4358EC9D79CDA4692CE5E948C6FD409408F4C919FCADFE3
CPU: SM7325 (Snapdragon 778G 5G)
Vendor: Xiaomi
MSM HW ID: 001920E100720000
SBL SW Ver: 00000000
Prepare loader file... downloading... OK
Loader hash: 75735EE266D69077F1C2B623158AC0FC4017C88A
Loader PK hash: 1BEBE3863A6781DB4B01086063007334DE9E5CA14971C7C4F4358EC9D79CDA4692CE5E948C6FD409408F4C919FCADFE3
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [UFS]
Storage info:
Type: UFS
Name:
Page size: 1000
Block size: 1000
Partition count: 6
LU0 size: 0x3AFE000000 (235.97Gb)
LU1 size: 0x0001000000 (16.00Mb)
LU2 size: 0x0001000000 (16.00Mb)
LU3 size: 0x0002000000 (32.00Mb)
LU4 size: 0x008F800000 (2.24Gb)
LU5 size: 0x0002000000 (32.00Mb)
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : Xiaomi
Product Manufacturer : Xiaomi
Product Model : 2109119DG
Product Name : lisa_global
Product Device : lisa
Product Board : lisa
Board Platform : lahaina
Build ID : RKQ1.211001.001
Build Date : Tue Dec 17 10:33:06 UTC 2024
Security Patch : 2024-11-01
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : V816.0.11.0.UKOMIXM
Userdata FS Type : F2FS
MiAcc Find Device : Enabled
Erase FRP... OK
Done!

 

[yurais]

Selected model: Mediatek Mediatek
Operation: Wipe Data
Software version: 7.12


Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x420C483B, 0x03AC0807, 0x0814898B, 0xBC4365FA
Get Chip ID... [MT6833]
Get SOC ID... [7022FCEA02F8AK5AFDD812732FFF96B62S23AEC1F8716DB648 D78BA275E6C0F5]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [14]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD6010S41334135363R126FA3E62D59EM
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: A3A561
EMMC_ID : 0xD6010341K34135363D126FA3E62D59EM
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E67800000 (57.62Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: info not available
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : ZTE
Product Manufacturer : ZTE
Product Model : ZTE 7540N
Product Name : P633F08_2
Product Device : P633F08
Product Board : Crabapple
Board Platform : mt6833
Build ID : RP1A.200720.011
Build Date : Wed Jun 19 16:56:04 CST 2024
Display ID : MyOS11.1.3_7540N_PJ_VDC_ZA
Security Patch : 2024-06-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 20240619.162606
Userdata FS Type : F2FS
Formatting "userdata" partition... OK
Formatting "metadata" partition... OK
Wipe data done!

Hello boss.

Any chance to get the Testpoint please ?

 

[GsmToto]

Selected model: Mediatek Mediatek
Operation: Wipe Data
Software version: 8.8



Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM19 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x420C483B, 0x03AC0807, 0x0814898B, 0xBC4365FA
Get Chip ID... [MT6833]
Get SOC ID... [7022FCEA02F8A25AFDD812732FFF96B62223AEC1F8716DB648 D78BA275E6C0F8]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [14]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD60103413341353631126FA3E62D59E5
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: A3A561
EMMC_ID : 0xD60103413341353631126FA3E62D59E5
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E67800000 (57.62Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: info not available
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : ZTE
Product Manufacturer : ZTE
Product Model : ZTE 7540N
Product Name : P633F08_2
Product Device : P633F08
Product Board : Crabapple
Board Platform : mt6833
Build ID : RP1A.200720.011
Build Date : Wed Jun 19 16:56:04 CST 2024
Display ID : MyOS11.1.3_7540N_PJ_VDC_ZA
Security Patch : 2024-06-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 20240619.162606
Userdata FS Type : F2FS
Formatting "userdata" partition... OK
Formatting "metadata" partition... OK
Wipe data done!

 

[msjabar]

Selected model: Samsung SM-A245F (Galaxy A24)
Operation: Erase FRP
Software version: 8.9
Work ID: 70310902

Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM36 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM36 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xFE0A9D5B, 0xCADACA99, 0xB506E944, 0x323F7648
Get Chip ID... [MT1208]
Get SOC ID... [0323FAABB8004C7D0EEB7EAD3C4BCD91B31141603BF8F2902FA4B1498A7CDA2C]
Get sec config... OK [000000E5]
Send AUTH file... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Setup device enviroment... OK
Setup device parametres... OK
Get device info... OK
UFS CID (FW VER): KM5L9001DM-B424 ()
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : KM5L9001DM-B424
UFS_FWVER :
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A245F
Product Name : a24nsxx
Product Device : a24
Build ID : SP1A.210812.016
Build Date : Thu Feb 6 13:06:08 KST 2025
Firmware Version : A245FXXS8CYB1
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-A245F%20(Galaxy%20A24)/FRP_BACKUP_(2025-4-24_17-3-57)/
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: TCL 8192A
Operation: Erase FRP
Software version: 8.9

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E1]
Active sec flags: [SBC]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xFFC27FE4, 0x65138B6D, 0x23A7CA2C, 0x11D4558B
Get Chip ID... [MT6761]
Get SOC ID... [61972248BA3C118D7C921615282771AA39961A6EE9E84EFE14 2AA39F0C7D33E6]
Get sec config... OK [000000E1]
Get hw mode... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD601034133413535311248BEE7D1195F
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: A3A551
EMMC_ID : 0xD601034133413535311248BEE7D1195F
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x073A000000 (28.91Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: info not available
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : TCL
Product Model : 8192A
Product Name : 8192A
Product Device : Freyr_10_1_4G
Product Board : tb8766p1_64_bsp
Board Platform : mt6761
Build ID : TP1A.220624.014
Build Date : Tue Nov 28 10:23:13 HKT 2023
Display ID : 01
Security Patch : 2023-10-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : KYO3
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/TCL_8192A/FRP_BACKUP_(2025-4-26_10-11-23)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!

 

[msjabar]

Selected model: Samsung SM-A245F (Galaxy A24)
Operation: Erase FRP
Software version: 8.9
Work ID: 70752113

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM33 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM33 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x2E42336A, 0x378BD369, 0x3C028FCF, 0x02C4A6B6
Get Chip ID... [MT1208]
Get SOC ID... [6424ED6F69EB0D12C5C4112BA79B9B48886E9DE194C243E84E241A701246C34B]
Get sec config... OK [000000E5]
Send AUTH file... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Setup device enviroment... OK
Setup device parametres... OK
Get device info... OK
UFS CID (FW VER): MT128GAXAU2U228C ()
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : MT128GAXAU2U228C
UFS_FWVER :
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A245F
Product Name : a24nsxx
Product Device : a24
Build ID : SP1A.210812.016
Build Date : Tue Dec 3 14:15:30 KST 2024
Firmware Version : A245FXXU8CXL1
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-A245F%20(Galaxy%20A24)/FRP_BACKUP_(2025-4-28_10-56-33)/
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Loading packet file... OK
Init partition data... OK
Init files... OK
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM81
Port: USB\VID_1782&PID_4D00\7&335A793&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Load files... OK
Selected processor: SC9863A_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 0161A08S2310001D
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : RMX3231
Product Name : RMX3231BA
Product Device : RMX3231
Product Board : RMX3231
Board Platform : sp9863a
Build ID : RP1A.201005.001
Build Date : Tue Mar 22 16:53:21 CST 2022
Display ID : RMX3231EU_11.A.72
Security Patch : 2022-03-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 295
Userdata FS Type : F2FS
Executing _BKF_PhaseCheck...
ReadFlashByID... OK
Executing _BKF_ProdNV...
ReadFlashByID... OK
Executing _BKF_NV_LTE...
ReadFlashByID... OK
Executing _REPARTITION_...
ForceRepartitionByID... OK
Flashing NV_LTE...
ReadFlashByID... OK
DownloadByID... OK
Flashing ProdNV...
DownloadByID... OK
Executing PhaseCheck...
DownloadByID... OK
SetTimeStamp... OK
Executing EraseUBOOT...
EraseFlashByID... OK
Executing EraseUBOOTLOG...
EraseFlashByID... OK
Flashing SPLLoader...
DownloadByID... OK
Flashing VBMETA...
DownloadByID... OK
Flashing OCDT...
DownloadByID... OK
Flashing VBMETA_SYSTEM...
DownloadByID... OK
Flashing VBMETA_SYSTEM_EXT...
DownloadByID... OK
Flashing VBMETA_VENDOR...
DownloadByID... OK
Flashing VBMETA_PRODUCT...
DownloadByID... OK
Flashing Modem_LTE...
DownloadByID... OK
Flashing Modem_LTE_DELTANV...
DownloadByID... OK
Flashing DSP_LTE_LTE...
DownloadByID... OK
Flashing DSP_LTE_GGE...
DownloadByID... OK
Flashing DFS...
DownloadByID... OK
Flashing GPS_GL...
DownloadByID... OK
Flashing GPS_BD...
DownloadByID... OK
Flashing Modem_WCN...
DownloadByID... OK
Flashing BOOT...
DownloadByID... OK
Flashing DTBO...
DownloadByID... OK
Flashing My_preload...
DownloadByID... OK
Flashing Super...
DownloadByID... OK
Flashing Cache...
DownloadByID... OK
Flashing UserData...
DownloadByID... OK
Flashing BootLogo...
DownloadByID... OK
Flashing Fastboot_Logo...
DownloadByID... OK
Flashing Socko...
DownloadByID... OK
Flashing Odmko...
DownloadByID... OK
Executing FLASH_LTE...
EraseFlashByID... OK
Executing EraseMisc...
EraseFlashByID... OK
Executing EraseSysdumpdb...
EraseFlashByID... OK
Flashing Trustos...
DownloadByID... OK
Flashing Teecfg...
DownloadByID... OK
Flashing SML...
DownloadByID... OK
Flashing Persist...
DownloadByID... OK
Executing EraseMetadata...
EraseFlashByID... OK
Flashing UBOOTLoader...
DownloadByID... OK
Flashing done!