Z3X Pandora Tool 4.9 Update. New devices, new exclusive functions added

[GsmToto]

Pandora Tool 4.9 Released. New devices, new exclusive functions added


Samsung SPD devices added:

Samsung SM-A032F Galaxy A03 Core
Samsung SM-A032M Galaxy A03 Core
Samsung SM-A035F Galaxy A03
Samsung SM-A035G Galaxy A03
Samsung SM-A035M Galaxy A03
Samsung SM-T509 Galaxy Tab A7 10.4
Samsung SM-X200 Galaxy Tab A8 2021
Samsung SM-X205 Galaxy Tab A8 2021
Samsung SM-X205C Galaxy Tab A8 2021
Samsung SM-X205N Galaxy Tab A8 2021

List of supported function for listed Samsung devices (Relock/Unlock Bootloader, Backup/Write/Format RPMB, Erase FRP, Format Flash, Read Info/IMEI/Partitions, Restore From Backup, Unlock Network, Repair, Wipe Data/Partitions, Write Firmware, SET KG state, Repair SN)



SIGMA MTK Devices added:

X-TREME PQ18
X-TREME PQ34
X-TREME PQ36
X-TREME PQ39 Max
X-TREME PQ39 Ultra
X-TREME PQ51

List of supported function for listed VIVO devices(Relock/Unlock Bootloader, Backup/Write/Format RPMB, Erase FRP, Format Flash, Read Info/IMEI/Partitions, Restore From Backup, Unlock Network, Repair, Wipe Data/Partitions, Write Firmware)



Tecno SPD devices added:

BC2c Tecno Pop 4
BD2, BD2p Tecno Pop 5
BD1 Tecno Pop 5 Go
BD4 Tecno Pop 5 LTE

List of supported function for listed Tecno devices (Relock/Unlock Bootloader, Backup/Write/Format RPMB, Erase FRP, Format Flash, Read Info/IMEI/Partitions, Restore From Backup, Unlock Network, Repair, Wipe Data/Partitions, Write Firmware)


Added new checkbox in Setting - General - Allow Beta/Unsafe Operations
This option don't stored in SW settings, need enable every launch


IMPORTANT: Temporary disabled Advanced Authorization in Preloader mode for Vivo on
MT6833, MT6853, MT6893 ( Can be enabled in Setting - General - Allow Beta/Unsafe Operations).
We received some user report about full memory «erase»
At this moment we try to get similar situation on our devices and fix this.


Added Erase FRP And Wipe for MTK

Improved connections UFS

Improved support EROFS

 

[GSMNeon]

Samsung A03 (A035F) U3 IMEI Repair Support Or Not?

 

[Remizbushka]

Dear sir. I tested one of the update models, it doesn't work

Обрана модель: Samsung SM-X200 (Samsung Galaxy Tab A8 2021)
Операція: Read Flash Info
Версія програмного забезпечення: 4.9

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Очікування пристрою... в порядку
Пристрій знайдено COM15
Port: USB\VID_1782&PID_4D00\6&10A64AA0&0&2
Драйвер: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
З'єднання з пристроєм... в порядку
Selected processor: Tiger_T610_64
Завантажити файли... в порядку
З'єднання з першим попереднім завантажувачем... помилка (22)  error 22

 

[Dla331]

Pandora Tool 4.9 Released. New devices, new exclusive functions added


Samsung SPD devices added:

Samsung SM-A032F Galaxy A03 Core
Samsung SM-A032M Galaxy A03 Core
Samsung SM-A035F Galaxy A03
Samsung SM-A035G Galaxy A03
Samsung SM-A035M Galaxy A03
Samsung SM-T509 Galaxy Tab A7 10.4
Samsung SM-X200 Galaxy Tab A8 2021
Samsung SM-X205 Galaxy Tab A8 2021
Samsung SM-X205C Galaxy Tab A8 2021
Samsung SM-X205N Galaxy Tab A8 2021

List of supported function for listed Samsung devices (Relock/Unlock Bootloader, Backup/Write/Format RPMB, Erase FRP, Format Flash, Read Info/IMEI/Partitions, Restore From Backup, Unlock Network, Repair, Wipe Data/Partitions, Write Firmware, SET KG state, Repair SN)



SIGMA MTK Devices added:

X-TREME PQ18
X-TREME PQ34
X-TREME PQ36
X-TREME PQ39 Max
X-TREME PQ39 Ultra
X-TREME PQ51

List of supported function for listed VIVO devices(Relock/Unlock Bootloader, Backup/Write/Format RPMB, Erase FRP, Format Flash, Read Info/IMEI/Partitions, Restore From Backup, Unlock Network, Repair, Wipe Data/Partitions, Write Firmware)



Tecno SPD devices added:

BC2c Tecno Pop 4
BD2, BD2p Tecno Pop 5
BD1 Tecno Pop 5 Go
BD4 Tecno Pop 5 LTE

List of supported function for listed Tecno devices (Relock/Unlock Bootloader, Backup/Write/Format RPMB, Erase FRP, Format Flash, Read Info/IMEI/Partitions, Restore From Backup, Unlock Network, Repair, Wipe Data/Partitions, Write Firmware)


Added new checkbox in Setting - General - Allow Beta/Unsafe Operations
This option don't stored in SW settings, need enable every launch


IMPORTANT: Temporary disabled Advanced Authorization in Preloader mode for Vivo on
MT6833, MT6853, MT6893 ( Can be enabled in Setting - General - Allow Beta/Unsafe Operations).
We received some user report about full memory «erase»
At this moment we try to get similar situation on our devices and fix this.


Added Erase FRP And Wipe for MTK

Improved connections UFS

Improved support EROFS

advance authorization not work ..it stuck at setup download info...

 

[tuserhp]

Pandora 4.9 : AFH / Mega / Mirror / MediaFire

 

[Mojofixs]

Selected model: Samsung SM-A035F (Samsung Galaxy A03 )
Operation: Read Flash Info
Software version: 4.9

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Waiting for device... OK
Device found at COM25
Port: USB\VID_1782&PID_4D00\6&DA81BC7&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Connecting to device... OK
Selected processor: SC9863A
Load files... OK
Connect preloader 1... error(32)




please fix your loader...

 

[Remizbushka]

Works very well, needs TP​

Обрана модель: Samsung SM-X200 (Samsung Galaxy Tab A8 2021)
Операція: Read Partitions
Версія програмного забезпечення: 4.9

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Очікування пристрою... в порядку
Пристрій знайдено COM15
Port: USB\VID_1782&PID_4D00\6&10A64AA0&0&2
Драйвер: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
З'єднання з пристроєм... в порядку
Selected processor: Tiger_T610_64
Завантажити файли... в порядку
З'єднання з першим попереднім завантажувачем... в порядку
З'єднання з другим попереднім завантажувачем... в порядку
З'єднання з loader 1... в порядку
З'єднання з loader 2... в порядку
Серійний номер: 81C20B8J02833
Читання інформації про розділи... в порядку
Перевірка стану A/B... в порядку
Читання інформації про продукт... [EXT4] ... в порядку
Product Brand        : samsung
Product Manufacturer : samsung
Product Model        : SM-X200
Product Name         : gta8wifixx
Product Device       : gta8wifi
Build ID             : TP1A.220624.014
Build Date           : Fri Dec 16 17:42:50 KST 2022
Display ID           : TP1A.220624.014.X200XXU1CVL5
Security Patch       : 2022-11-01
Version SDK          : 33
Version Release      : 13
Version Codename     : REL
Firmware Version     : X200XXU1CVL5

 

[repaire-fix]

i request pandora team please fix this argent.

 

[abrapy]

A035M unlock network not working

Selected model: Spreadtrum Spreadtrum
Operation: Unlock network
Software version: 4.10
Work ID: 1380314

Waiting for device... OK
Device found at COM124
Port: USB\VID_1782&PID_4D00\6&C1A2E2F&0&1
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Connecting to device... OK
Selected processor: Tiger_T606_64
Load files... OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 82318B6Y02F79
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A035M
Product Name : a03ub
Product Device : a03
Build ID : SP1A.210812.016
Build Date : Sun Oct 2 01:03:25 KST 2022
Display ID : SP1A.210812.016.A035MUBS1BVJ1
Security Patch : 2022-10-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : A035MUBS1BVJ1
Check security state... OK [2]
Check patch state... OK
Read patch data... OK
Correct patch... OK
Patch data... error(3.2)

 

[repaire-fix]

I Don't know what was the problem...this update...every update i facing one or one problem

Please login to view image

 

[Mojofixs]

Selected model: OPPO CPH2251 (OPPO Reno 6 5G)
Operation: Restore From Backup
Software version: 4.10

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to BOX in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0959
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM24 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0959
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x9FB2090B, 0xA9217960, 0xA8A642BB, 0xD127A259
Get Chip ID... [MT6877]
Get SOC ID... [4A026BC72F41CD16A235515DC32EF9E3B3FC5FA2CEE8381C370BCE80F8845BC6]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [17]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): H9HQ15AFAMBDAR (A043)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9HQ15AFAMBDAR
UFS_FWVER : A043
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0200000000 (8.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : alps
Product Manufacturer : alps
Product Model : oplus_mssi_64_cn_armv82
Product Name : sys_oplus_mssi_64_cn_armv82
Product Device : oplus_mssi_64_cn_armv82
Product Board : oplus6877
Board Platform : MT6877
Build ID : RP1A.200720.011
Build Date : Tue Oct 12 01:02:09 CST 2021
Display ID : RP1A.200720.011 release-keys
Security Patch : 2021-09-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 1633971144638
Restore Backup done!



PLEASE MAKE THIS DEVICE SUPPORT IMEI REPAIR THANKS!

 

[GsmToto]

Lenovo TB-J616F FRP done see log,

Selected model: Lenovo Mediatek
Operation: Erase FRP
Software version: 4.4

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to BOX in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
Device found at COM45 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0813
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6785]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0813
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6785]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
Device found at COM45 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0813
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6785]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xCA4847EF, 0x298A4D3C, 0x8090AF86, 0xA1E28364
Get Chip ID... [MT6785]
Get SOC ID... [3009D97FC7D87CA3D5B642AB47F16B3D2329BA00838BA08888 9E4EE02185FF5C]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [12]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): H9HQ15ACPMBDAR (A002)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9HQ15ACPMBDAR
UFS_FWVER : A002
BLOCK_SIZE: 0x0000001000 (4,00Kb)
UFS_LU0 : 0x0000400000 (4,00Mb)
UFS_LU1 : 0x0000400000 (4,00Mb)
UFS_LU2 : 0x1DCB000000 (119,17Gb)
RAM INFO:
INT_SRAM: 0x0000080000 (512,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... OK
Product Brand : Lenovo
Product Manufacturer : LENOVO
Product Model : Lenovo TB-J616F
Product Name : TB-J616F
Product Device : TB-J616F
Product Board : p11
Board Platform : mtk
Build ID : RP1A.200720.011
Build Date : Tue Jan 18 07:41:08 CST 2022
Display ID : TB-J616F_S000044_220118_ROW
Security Patch : 2021-12-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : TB-J616F_S000044_220118_ROW
Read partition "frp"... OK
Backup saved to HYPERLINK C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Lenovo_MT6785/FRP_BACKUP_(2023-4-10_10-59-40)/"directory
Writting FRP data... OK
Erase FRP done!

 

[samim vai]

vivo y16 y01 y91c same model not work plz fix problem

 

[injinia]

Pandora Tool 4.9 Released. New devices, new exclusive functions added


Samsung SPD devices added:

Samsung SM-A032F Galaxy A03 Core
Samsung SM-A032M Galaxy A03 Core
Samsung SM-A035F Galaxy A03
Samsung SM-A035G Galaxy A03
Samsung SM-A035M Galaxy A03
Samsung SM-T509 Galaxy Tab A7 10.4
Samsung SM-X200 Galaxy Tab A8 2021
Samsung SM-X205 Galaxy Tab A8 2021
Samsung SM-X205C Galaxy Tab A8 2021
Samsung SM-X205N Galaxy Tab A8 2021

List of supported function for listed Samsung devices (Relock/Unlock Bootloader, Backup/Write/Format RPMB, Erase FRP, Format Flash, Read Info/IMEI/Partitions, Restore From Backup, Unlock Network, Repair, Wipe Data/Partitions, Write Firmware, SET KG state, Repair SN)



SIGMA MTK Devices added:

X-TREME PQ18
X-TREME PQ34
X-TREME PQ36
X-TREME PQ39 Max
X-TREME PQ39 Ultra
X-TREME PQ51

List of supported function for listed VIVO devices(Relock/Unlock Bootloader, Backup/Write/Format RPMB, Erase FRP, Format Flash, Read Info/IMEI/Partitions, Restore From Backup, Unlock Network, Repair, Wipe Data/Partitions, Write Firmware)



Tecno SPD devices added:

BC2c Tecno Pop 4
BD2, BD2p Tecno Pop 5
BD1 Tecno Pop 5 Go
BD4 Tecno Pop 5 LTE

List of supported function for listed Tecno devices (Relock/Unlock Bootloader, Backup/Write/Format RPMB, Erase FRP, Format Flash, Read Info/IMEI/Partitions, Restore From Backup, Unlock Network, Repair, Wipe Data/Partitions, Write Firmware)


Added new checkbox in Setting - General - Allow Beta/Unsafe Operations
This option don't stored in SW settings, need enable every launch


IMPORTANT: Temporary disabled Advanced Authorization in Preloader mode for Vivo on
MT6833, MT6853, MT6893 ( Can be enabled in Setting - General - Allow Beta/Unsafe Operations).
We received some user report about full memory «erase»
At this moment we try to get similar situation on our devices and fix this.


Added Erase FRP And Wipe for MTK

Improved connections UFS

Improved support EROFS

Pandora tool please add new loader for spd device like x6511b new security also check some model are incorrect like kg5j its mtk but on tool is showing spd

Add more flashing SPD device is too much dead after FRP

 

[jalal123]

Oppo A31Network Unlock-Oppo CPH2015 Network Lock​

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to BOX in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM6 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x572EFEEC, 0x6FC9E810, 0xE3A81DC5, 0x139EF377
Get Chip ID... [MT6765]
Get SOC ID... [89E2C28A2A64DF88A40AECE3BF8E557CE97901FA66417D0886B4822843C9B30B]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A684339615033015A581A6C2763
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hC9aP3
EMMC_ID : 0x90014A684339615033015A581A6C2763
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Manufacturer : OPPO
Product Board : oppo6765_19581
Board Platform : MT6765
Build ID : PPR1.180610.011
Build Date : Tue Mar 9 21:00:49 CST 2021
Security Patch : 2021-03-05
Version SDK : 28
Version Release : 9
Version Codename : REL
Read security partition from phone... OK
Read security files... OK
Read security files... OK
Read lock info... OK
Read partition "nvdata"... OK
Read NVDATA files... OK
Read IMEI... OK
Unlock... OK [DF1, DF2]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

Selected model: OPPO CPH2015 (OPPO A31)
Operation: Unlock network
Software version: 4.10

 

[IrfanMithani4882]

V23E still not supported please add this model please


Search DA... not found
Advanced Authorization (Preloader) not supported for this CPU

Selected model: Vivo PD2150F (Vivo V23e)
Operation: Read Flash Info
Software version: 5.0
Work ID: 1956305

 

[mpingojr]

MDM FILE TESTED VIA PANDORA PERMANENT

Nokia C31
Nokia c30
Nokia c20
Nokia c1 2nd edition
Nokia G10
Nokia G21
Nokia c01 plus
Nokia c21 plus

Tecno
Spark 8C
spark 9T
Spark 7
Pop 5 pro

Infinix
X6511G
X665
X657
X6511B

Samsung
A032f u1 & u2
A035 u1 & u2 repair and no service

ufi
A045f
A022f u3
Sumaphonez
whatsapp +255659581643