UFi Poco X3 Pro ufs 3.1 Ufi Error: No UFS device detected.Mipi Medusa Easy Jtag Plus read ok.Ufi team bad

[mathew_di]

Welcome to MiPi Box
MiPi Connected
Selected UFS interface
Please click <Connect IC> button to initial IC
Model Settings:
Interface : UFS
Gear : HS-G2A
VCC: 2.6V VCCQ: 1.8V
Connected. Reading information
Manufacturer Name: SAMSUNG
Product Name: KLUDG4UHDC-B0E1
Serial Number: 4CF3C5855F19
OEM ID: SAMSUNG_OEM_ID
[NAME] ROW_SZ, PageSz, PageCount.
[Unit0] 117GB, 4096, 30922752.
[BootA] 8MB, 4096, 2048.
[BootB] 8MB, 4096, 2048.
[Unit3] 32MB, 4096, 8192.
[Unit4] 1GB, 4096, 262144.
[Unit5] 160MB, 4096, 40960.
[RPMB] 16MB, 256, 65536.
[Attribute] WR:4B, RD:4B.
[Descriptor] WR:256B, RD:256B.
------------------------------------------
FLAGS:
fPermanentWPEn = 0h
fPermanentDisableFwUpdate = 0h
ATTRIBUTES:
Boot LUN Enable: 01h(Enabled boot from Boot LU A)
CLK Frequency: 00h(19.2MHz QCOM)
Descriptor Lock(OTP): 00h(Not Locked)
DESCRIPTOR - DEVICE:
Boot Enable: 01h(Boot feature enabled)
UFS Version: 3.1
Manufacturing Date: 2020-12
bUFSFeaturesSupport: 0001h
wDeviceVersion: 0000h
DESCRIPTOR - GEOMETRY:
Total Capacity: 0x1dcc800000(119GB)
DESCRIPTOR - HEALTH:
Device life time method A: 2h(10%-20% device life time used)
Device life time method B: 2h(10%-20% device life time used)
Pre End of Life: 1h(Normal. Consumed less than 80% of reserved blocks)
DESCRIPTOR - STRING:
Firmware Version: 0200
RPMB:
Counter: 28212

LUN0 GPT
PrimaryGPT_0: 0x0 - 0x6000 (24.00KB)
switch: 0x6000 - 0x7000 (8.00KB)
ssd: 0x8000 - 0xf000 (32.00KB)
dbg: 0x10000 - 0x17000 (32.00KB)
bk01: 0x18000 - 0x1f000 (32.00KB)
bk02: 0x20000 - 0x3f000 (128.00KB)
bk03: 0x40000 - 0x7f000 (256.00KB)
bk04: 0x80000 - 0xff000 (512.00KB)
keystore: 0x100000 - 0x17f000 (512.00KB)
frp: 0x180000 - 0x1ff000 (512.00KB)
countrycode: 0x200000 - 0x3ff000 (2.00MB)
misc: 0x400000 - 0x7ff000 (4.00MB)
vm-data: 0x800000 - 0xbff000 (4.00MB)
bk06: 0xc00000 - 0xfff000 (4.00MB)
logfs: 0x1000000 - 0x17ff000 (8.00MB)
ffu: 0x1800000 - 0x1fff000 (8.00MB)
oops: 0x2000000 - 0x2fff000 (16.00MB)
devinfo: 0x3000000 - 0x3fff000 (16.00MB)
oem_misc1: 0x4000000 - 0x4fff000 (16.00MB)
metadata: 0x5000000 - 0x5fff000 (16.00MB)
bk08: 0x6000000 - 0x7f5b000 (31.36MB)
splash: 0x7f5c000 - 0x9fff000 (32.64MB)
bk09: 0xa000000 - 0xbfff000 (32.00MB)
super: 0xc000000 - 0x22bfff000 (8.50GB)
logdump: 0x22c000000 - 0x22ffff000 (64.00MB)
minidump: 0x230000000 - 0x237fff000 (128.00MB)
rawdump: 0x238000000 - 0x23ffff000 (128.00MB)
imagefv: 0x240000000 - 0x2401ff000 (2.00MB)
recovery: 0x240200000 - 0x2481ff000 (128.00MB)
cache: 0x248200000 - 0x2601ff000 (384.00MB)
exaid: 0x260200000 - 0x2781ff000 (384.00MB)
cust: 0x278200000 - 0x2b81ff000 (1.00GB)
userdata: 0x2b8200000 - 0x1d7d7fa000 (107.08GB)
BackupGPT_0: 0x1d7d7fb000 - 0x7d7ff000 (20.00KB)
------------------------------------------

LUN1 GPT
PrimaryGPT_1: 0x0 - 0x6000 (24.00KB)
xbl_config: 0x6000 - 0x85000 (512.00KB)
xbl: 0x86000 - 0x785000 (7.00MB)
last_parti: 0x786000 - 0x7fa000 (468.00KB)
BackupGPT_1: 0x7fb000 - 0x7ff000 (20.00KB)
------------------------------------------

LUN2 GPT
PrimaryGPT_2: 0x0 - 0x6000 (24.00KB)
xbl_configbak: 0x6000 - 0x85000 (512.00KB)
xblbak: 0x86000 - 0x785000 (7.00MB)
last_parti: 0x786000 - 0x7fa000 (468.00KB)
BackupGPT_2: 0x7fb000 - 0x7ff000 (20.00KB)
------------------------------------------

LUN3 GPT
PrimaryGPT_3: 0x0 - 0x6000 (24.00KB)
bk31: 0x6000 - 0xd000 (32.00KB)
cdt: 0xe000 - 0x2d000 (128.00KB)
bk32: 0x2e000 - 0x105000 (864.00KB)
ddr: 0x106000 - 0x205000 (1.00MB)
bk33: 0x206000 - 0x305000 (1.00MB)
last_parti: 0x306000 - 0x1ffa000 (28.96MB)
BackupGPT_3: 0x1ffb000 - 0x1fff000 (20.00KB)
------------------------------------------

LUN4 GPT
PrimaryGPT_4: 0x0 - 0x6000 (24.00KB)
multiimgoem: 0x6000 - 0xd000 (32.00KB)
multiimgqti: 0xe000 - 0x15000 (32.00KB)
secdata: 0x16000 - 0x1d000 (32.00KB)
limits: 0x1e000 - 0x25000 (32.00KB)
bk41: 0x26000 - 0x3f000 (104.00KB)
qupfw: 0x40000 - 0x5f000 (128.00KB)
qupfwbak: 0x60000 - 0x7f000 (128.00KB)
apdp: 0x80000 - 0xbf000 (256.00KB)
msadp: 0xc0000 - 0xff000 (256.00KB)
vbmeta: 0x100000 - 0x11f000 (128.00KB)
storsec: 0x120000 - 0x13f000 (128.00KB)
vbmeta_system: 0x140000 - 0x15f000 (128.00KB)
vbmeta_vendor: 0x160000 - 0x17f000 (128.00KB)
devcfg: 0x180000 - 0x1bf000 (256.00KB)
devcfgbak: 0x1c0000 - 0x1ff000 (256.00KB)
aop: 0x200000 - 0x27f000 (512.00KB)
aopbak: 0x280000 - 0x2ff000 (512.00KB)
uefivarstore: 0x300000 - 0x37f000 (512.00KB)
catefv: 0x380000 - 0x3ff000 (512.00KB)
cmnlib: 0x400000 - 0x4ff000 (1.00MB)
cmnlibbak: 0x500000 - 0x5ff000 (1.00MB)
cmnlib64: 0x600000 - 0x6ff000 (1.00MB)
cmnlib64bak: 0x700000 - 0x7ff000 (1.00MB)
bk43: 0x800000 - 0x8ff000 (1.00MB)
keymaster: 0x900000 - 0x9ff000 (1.00MB)
keymasterbak: 0xa00000 - 0xaff000 (1.00MB)
bluetooth: 0xb00000 - 0xbff000 (1.00MB)
dip: 0xc00000 - 0xcff000 (1.00MB)
catecontentfv: 0xd00000 - 0xdff000 (1.00MB)
bk44: 0xe00000 - 0x15ff000 (8.00MB)
bk44: 0x1600000 - 0x17ff000 (2.00MB)
cateloader: 0x1800000 - 0x19ff000 (2.00MB)
uefisecapp: 0x1a00000 - 0x1bff000 (2.00MB)
uefisecappbak: 0x1c00000 - 0x1dff000 (2.00MB)
toolsfv: 0x1e00000 - 0x1fff000 (2.00MB)
abl: 0x2000000 - 0x21ff000 (2.00MB)
ablbak: 0x2200000 - 0x23ff000 (2.00MB)
tz: 0x2400000 - 0x27ff000 (4.00MB)
tzbak: 0x2800000 - 0x2bff000 (4.00MB)
bk45: 0x2c00000 - 0x2fff000 (4.00MB)
spunvm: 0x3000000 - 0x37ff000 (8.00MB)
hyp: 0x3800000 - 0x3fff000 (8.00MB)
hypbak: 0x4000000 - 0x47ff000 (8.00MB)
gsort: 0x4800000 - 0x57ff000 (16.00MB)
dtbo: 0x5800000 - 0x77ff000 (32.00MB)
ifaa: 0x7800000 - 0xb7ff000 (64.00MB)
logo: 0xb800000 - 0xf7ff000 (64.00MB)
dsp: 0xf800000 - 0x137ff000 (64.00MB)
boot: 0x13800000 - 0x1b7ff000 (128.00MB)
bk47: 0x1b800000 - 0x1cdff000 (22.00MB)
core_nhlos: 0x1ce00000 - 0x277ff000 (170.00MB)
modem: 0x27800000 - 0x3b7ff000 (320.00MB)
last_parti: 0x3b800000 - 0x3fffa000 (71.98MB)
BackupGPT_4: 0x3fffb000 - 0x3ffff000 (20.00KB)
------------------------------------------

LUN5 GPT
PrimaryGPT_5: 0x0 - 0x6000 (24.00KB)
fsg: 0x6000 - 0x805000 (8.00MB)
fsc: 0x806000 - 0x845000 (256.00KB)
bk51: 0x846000 - 0x8ff000 (744.00KB)
bk52: 0x900000 - 0x9ff000 (1.00MB)
modemst1: 0xa00000 - 0x11ff000 (8.00MB)
modemst2: 0x1200000 - 0x19ff000 (8.00MB)
persist: 0x1a00000 - 0x59ff000 (64.00MB)
persistbak: 0x5a00000 - 0x99ff000 (64.00MB)
last_parti: 0x9a00000 - 0x9ffa000 (5.98MB)
BackupGPT_5: 0x9ffb000 - 0x9fff000 (20.00KB)
------------------------------------------
------------------------------------------
Reading Andriod Info
ManfcID = QUALCOMM
MName = QSSI
Model = QSSI SYSTEM IMAGE FOR ARM64
BuildID = SKQ1.211006.001
Android = 12
S Patch = 2022-04-01
Region = EN-GB
CPUApi = ARM64-V8A
Base = ANDROID-XIAOMI

2023_10_16_21_49_IMG_1693.MOV

 

[mathew_di]

ufs 3.1 error ufi team.
When will you update to UFS 3.1 box?

 

[aftab_ansari5287]

ufs 3.1 error ufi team.
When will you update to UFS 3.1 box?

Dear [B]mathew_di[/B]
UFS 3.1 is not supported in the Ufi UFS box. Supported protocol upto UFS 2.2 . Currently there is no support but the developer has said that support may be available in the future.

 

[mathew_di]

Dear [B]mathew_di[/B]
UFS 3.1 is not supported in the Ufi UFS box. Supported protocol upto UFS 2.2 . Currently there is no support but the developer has said that support may be available in the future.

If other UFS can make boxes, why can't UFI? I think they should add them. People trust UFI and always think it is the best.

 

[mathew_di]

If necessary, let UFS 3.0 and 3.1 process slowly, but let it support UFI.

For example, if they wanted activation for UFS 3.0 and 3.1, I would give it to them. We are making money and I think you should solve this and earn money too.

 

[aftab_ansari5287]

Hmm, people trust the Ufi box. But we will get support of UFS 3.1 in future. Anyway the developers are working on it, soon we all will get the update.

 

[mathew_di]

Hmm, people trust the Ufi box. But we will get support of UFS 3.1 in future. Anyway the developers are working on it, soon we all will get the update.

This is good news, God willing, you will release updates soon and we can operate UFI UFS 3.1.

 

[TriddicK]

UFi - Sukses Replace CPU & Repair UFS 3.1 with UFI-UFS Poco X3 Pro
This post write about one year ago... 3.1 working with ufi ufs...Check video in post..

 

[mathew_di]

UFi - Sukses Replace CPU & Repair UFS 3.1 with UFI-UFS Poco X3 Pro
This post write about one year ago... 3.1 working with ufi ufs...Check video in post..

My brother is very bad with Medusa and Easy Plus. I couldn't get the UFI.ufs 2.1 A51 UFS chip to read with UFI, but it read MIPI directly and took a backup.

UFS 3.1 reads whatever it wants, it did not read any model I tried. Currently, while the x3 pro UFS chip is working with Medusa Easy, I cannot do it with UFI and UFI is no longer available and is sold for the same price as Medusa.

Everything is clear, the best jtag box medusa and easy plus

 

[mathew_di]

 

[htelecom]

Hmm, people trust the Ufi box. But we will get support of UFS 3.1 in future. Anyway the developers are working on it, soon we all will get the update.

Developers are not working. They are sleeping. Do not fool people