Post here successfully Unlocked / Repaired / Flashed operations via NCK BOX/Dongle Premium v2

maanarman · Oct 3, 2018

Oppo A71 Factory Reset Done

Code:

 Action : Format UserData.
 Selected OPPO:A71
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Keep VOL+ and VOL- button untill inserting USB cable.
 Detected : Preloader And Gadget Serial (COM325)
 Phone detected...Please wait
 Using Algo 3.
 Helio MT6755 phone detected, swithing to helio api
 Loading Custom Preloader
 BBCHIP MT6755
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010047453642 : 000000000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 -Reading GPT Drive OK
 Detecting format adress....wait!
 Starting generic userdata format...!
 Partition: cache  begin: 0x12d000000       length: 0x10000000     
 Partition: userdata  begin: 0x13d000000       length: 0x265dfbe00     
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.

maanarman · Oct 3, 2018

Qmobile X25 Write FF Done

Code:

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM26)
 Error reading partition info.
 [0]Warning, nvram posible damaged!!.
 Wait untill phone will start charging.
 All done.

Code:

 Flash files count is :12
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM26)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Oct 3, 2018

Qmobile i6 Metal One Write FF Done

Code:

 Flash files count is :10
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A483847316505 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Oct 3, 2018

Qmobile I6i FRP Remove Done

Code:

 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Selected model: ELBRUS
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 768 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+6144Mb) SAMSUNG 0x464a32374d42
 EMMC FW VERSION: 02:00:00:00:00:00:00:00
 EMMC CID: 150100464A32374D42 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9880000       [3.649 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

maanarman · Oct 3, 2018

Samsung J800 Read FF Done

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) SAMSUNG 0x4e355530304d
 EMMC FW VERSION: 02:00:00:00:00:00:00:00
 EMMC CID: 1501004E355530304D : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9420000       [3.645 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM26)
 Build ID: JDQ39
 Display ID: J7209_6.0.1_V1.3
 Version: 4.2.2
 Build Date: Mon Sep 26 17:42:51 CST 2016
 Model: SM-J800FN
 Brand: Samsung
 Device: j7209
 Manufacturer: Samsung
 Region: US
 Mediatek Version Release: J7209_6.0.1_V1.3 20160926-1742
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0x1400000       
 Start processing MBR
 Reading:  BEGIN: 0x1400000        - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0x1480000        - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0x1500000        - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 359891060919908
 IMEI[2] from NVRAM: 359892060919906
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1d00000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x2700000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x3f80000        - LEN: 0x40000         
 Start processing LOGO ......
 Start processing system
 Reading:  BEGIN: 0x4d40000        - LEN: 0x28000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6572_EMMC_Samsung_SM-J800FN_4_2_2_J7209_6_0_1_V1_3 20160926-1742(2018_09_29_20_06)
 Wait untill phone will start charging.
 All done.

maanarman · Oct 6, 2018

Qmobile Blue 5 FRP Remove Done

Code:

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: ELBRUS
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x464531324d42
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 150100464531324D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

Code:

maanarman · Oct 6, 2018

Oppo A37f Remove Locks Done

Code:

Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Factory Format
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM67) detected.
Hello received.
HW ID: 00000000E1507000 MSM8916
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8916
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14.56 GB  Partitions count: 38
[0160B39F]Userdata Size: 11.02 GB
Manufacturer: OPPO
Cpu: arm64-v8a
Build Id: LMY47V
Model: A37f
Android Release: 5.1.1
Android Version: A37fEX_11_171008
Config: diag,serial_smd,rmnet_bam,adb
Security patch: 2017-09-01
Resetting cache , wait
Total blocks 10
Resetting userdata , wait
Total blocks 120
Factory reset done, wait untill phone start
This can take up to 5 min on slow phones.
Restarting phone.....
*************************************
Log saved: C:\Users\test\Documents\NckDongle\qc_module_Logs\reset_userdata_MSM8916_00000000E1507000_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F13.txt
Total Time: 00:00:28
Done.

maanarman · Oct 6, 2018

Oppo A83 Remove Pattern And FRP Done

Code:

Action : Boot Info.
 Selected OPPO:A83
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Keep VOL- button untill inserting USB cable.
 Detected : MediaTek USB Port (COM6)
 Boot mode: Brom
 Phone detected...Please wait
 Using Algo 3.
 Helio MT6763 phone detected, swithing to helio api
 Loading Custom Preloader
 BBCHIP MT6763
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 90014A48424734 : 000000000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: N6F26Q
 Version: 7.1.1
 Build Date: Thu Aug  2 17:54:35 CST 2018
 Mediatek Version Release: A83js_11_A.18_180802
 Model: OPPO A83js
 Brand: OPPO
 Device: M6763D
 Display ID: A83jsEX_11_A.18_180802
 [3]OPPO IMEI: 867611030180836
 SN: ZHPRLRSWZDQGRWS4
 Wait untill phone will start charging.
 All done.

Code:

 Action : Format UserData.
 Selected OPPO:A83
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Keep VOL- button untill inserting USB cable.
 Detected : MediaTek USB Port (COM6)
 Boot mode: Brom
 Phone detected...Please wait
 Using Algo 3.
 Helio MT6763 phone detected, swithing to helio api
 Loading Custom Preloader
 BBCHIP MT6763
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 90014A48424734 : 000000000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 -Reading GPT Drive OK
 Detecting format adress....wait!
 Starting generic userdata format...!
 Partition: cache  begin: 0x160800000       length: 0x10000000     
 Partition: userdata  begin: 0x170800000       length: 0x5d63fbe00     
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.

Code:

 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: A83
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Keep VOL- button untill inserting USB cable.
 Detected : MediaTek USB Port (COM6)
 Boot mode: Brom
 Phone detected...Please wait
 Using Algo 3.
 Helio MT6763 phone detected, swithing to helio api
 Loading Custom Preloader
 BBCHIP MT6763
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 90014A48424734 : 000000000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 -Reading GPT Drive OK
 Starting helio frp, not disconnect phone untill done
 [0]FRP Reset Done.
 [2]FRP Reset Done.
 All done.

maanarman · Oct 6, 2018

Oale X2 Read FF Done

Code:

Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A483847316505 : 00000000000000
 EMMC UA SIZE: 0x1d2000000    
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 -Reading GPT Drive OK
 Build ID: LMY47I
 Display ID: LMY47I test-keys
 Version: 5.1
 Build Date: Tue Jun 27 19:40:23 CST 2017
 Model: gxq6580_weg_l
 Brand: alps
 Device: gxq6580_weg_l
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000        
 Start processing nvram
 IMEI[1] from NVRAM: 354741100564831
 IMEI[2] from NVRAM: 354741100564849
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000        
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000        
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000        
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000      
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000        
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000      
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_10_01_16_29)
 Wait untill phone will start charging.
 All done.

maanarman · Oct 6, 2018

Logs

Code:

 Flash files count is :10
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM64)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A483847316505 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM72)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Oct 6, 2018

Logs

Code:

 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+8192Mb) HYNIX 0x2058494e5948
 EMMC FW VERSION: 16:00:00:00:00:00:00:00
 EMMC CID: 90014A2058494E5948 : 00000000000000
 EMMC UA SIZE: 0xe7000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe7600000       [3.615 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: LMY47I
 Display ID: X5_80L_WE_3GW_B15_EMMC_32_8_QHD_MT_M2491D_MT_D1_MioneR2 20171227.190653
 Version: 6.0
 Build Date: Mon Dec 25 19:06:53 CST 2017
 Model: Mione R2
 Brand: Mione R2
 Device: Mione R2
 Region: US
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_YUANDA6580.WE.L
 IMEI[1]: 352759081822590
 IMEI[2]: 352759081822608
 Wait untill phone will start charging.
 All done.



 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+8192Mb) HYNIX 0x2058494e5948
 EMMC FW VERSION: 16:00:00:00:00:00:00:00
 EMMC CID: 90014A2058494E5948 : 00000000000000
 EMMC UA SIZE: 0xe7000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe7600000       [3.615 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM26)
 -Reading GPT Drive OK
 Build ID: LMY47I
 Display ID: X5_80L_WE_3GW_B15_EMMC_32_8_QHD_MT_M2491D_MT_D1_MioneR2 20171227.190653
 Version: 6.0
 Build Date: Mon Dec 25 19:06:53 CST 2017
 Model: Mione R2
 Brand: Mione R2
 Device: Mione R2
 Manufacturer: Mione R2
 Region: US
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_YUANDA6580.WE.L
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 352759081822590
 IMEI[2] from NVRAM: 352759081822608
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_Mione R2_Mione R2_6_0_ALPS_L1_MP6_V2_YUANDA6580_WE_L(2018_09_23_19_25)
 Wait untill phone will start charging.
 All done.

maanarman · Oct 6, 2018

Logs

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM140)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 256 MB  DRAM
 ----------------------------------------------------
 EMMC: (14Gb+2048Mb) SAMSUNG 0x4e3958524d42
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 1501004E3958524D42 : 00000000000000
 EMMC UA SIZE: 0x70000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x70420000       [1.754 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM203)
 Build ID: JDQ39
 Display ID: ALPS.JB3.MP.V1
 Version: 4.4.4
 Build Date: Tue Dec  1 20:48:24 CST 2015
 Model: SM-G530F
 Brand: samsung
 Device: SM-G530F
 Manufacturer: SM-G530F
 Region: US
 Mediatek Version Release: ALPS.JB3.MP.V1
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0x600000       
 Start processing MBR
 Reading:  BEGIN: 0x600000         - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0x680000         - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0x700000         - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 355345151210234
 IMEI[2] from NVRAM: 355345151210242
 Start processing PROTECT_F
 Reading:  BEGIN: 0xf00000         - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x1900000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x2f80000        - LEN: 0x40000         
 Start processing LOGO ......
 Start processing system
 Reading:  BEGIN: 0x3d40000        - LEN: 0x23000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6572_EMMC_samsung_SM-G530F_4_4_4_ALPS_JB3_MP_V1(2018_09_29_20_21)
 Wait untill phone will start charging.
 All done.

maanarman · Oct 6, 2018

Logs

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Phone detected...Please wait
 Using Algo 3.
 Helio MT6797 phone detected, swithing to helio api
 BBCHIP MT6797
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 150100424A4E42 : 000000000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 -Reading GPT Drive OK
 Build ID: MRA58K
 Display ID: alps-mp-m0.mp9-V1.78.1_nb6797.6c.m_P10
 Version: 6.0
 Build Date: 2016Äê 09ÔÂ 20ÈÕ ÐÇÆÚ¶þ 15:53:12 CST
 Model: k15tb_a
 Brand: alps
 Device: k15tb_a
 Manufacturer: alps
 Mediatek Version Release: alps-mp-m0.mp9-V1.78.1_nb6797.6c.m_P10
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing recovery
 Start processing custom.img
 Reading:  BEGIN: 0x1088000        - LEN: 0x12c00000     
 Start processing frp ......
 Reading:  BEGIN: 0x14688000       - LEN: 0x100000       
 Start processing nvcfg ......
 Reading:  BEGIN: 0x14788000       - LEN: 0x800000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x14f88000       - LEN: 0x2000000       
 Start processing protect1 ......
 Reading:  BEGIN: 0x18f88000       - LEN: 0x800000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x19788000       - LEN: 0x878000       
 Start processing proinfo
 Reading:  BEGIN: 0x1aa00000       - LEN: 0x300000       
 Start processing md1img
 Start processing md1dsp
 Start processing md1arm7
 Start processing md3img
 Start processing scp1 ......
 Reading:  BEGIN: 0x1d100000       - LEN: 0x100000       
 Start processing scp2 ......
 Reading:  BEGIN: 0x1d200000       - LEN: 0x100000       
 Start processing nvram
 IMEI[1] from NVRAM: 352195080599220
 IMEI[2] from NVRAM: 352195080599238
 Start processing lk ......
 Start processing boot
 Start processing logo ......
 Start processing trustzone
 Start processing system
 Reading:  BEGIN: 0x20800000       - LEN: 0xa0000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6797_EMMC_alps_k15tb_a_6_0_alps-mp-m0_mp9-V1_78_1_nb6797_6c_m_P10(2018_09_30_14_09)
 Wait untill phone will start charging.
 All done.

maanarman · Oct 6, 2018

Logs

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x464531324d42
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 150100464531324D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM26)
 -Reading GPT Drive OK
 Build ID: NRD90M
 Version: 7.0
 Build Date: Tue Feb  6 09:37:53 CST 2018
 Model: QMobile Blue 5
 Brand: QMobile
 Manufacturer: QMobile
 Display ID: QMobile Blue5_MP_06_02
 Device: QMobile_Blue_5
 Mediatek Version Release: alps-mp-n0.mp2-V1_wtk6580.we.n
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 357615090045000
 IMEI[2] from NVRAM: 357615095045005
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing trustzone
 Start processing nvdata ......
 Reading:  BEGIN: 0x5aa0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0xa200000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xb000000        - LEN: 0xac000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_QMobile_QMobile Blue 5_7_0_alps-mp-n0_mp2-V1_wtk6580_we_n(2018_10_03_16_00)
 Wait untill phone will start charging.
 All done.

maanarman · Oct 9, 2018

Logs

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x4b3758564d42
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 1501004B3758564D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM26)
 Build ID: KOT49H
 Display ID: 01-12-2015-V3
 Version: 4.4.2
 Build Date: Mon Jan 12 14:47:04 CST 2015
 Model: TANGO A5
 Brand: iDROID
 Device: J608_PUBLIC
 Manufacturer: iDROID
 Region: US
 Mediatek Version Release: ALPS.KK1.MP1.V2.10
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0xc00000       
 Start processing MBR
 Reading:  BEGIN: 0xc00000         - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0xc80000         - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0xd00000         - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 354989068422514
 IMEI[2] from NVRAM: 354989068422522
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1500000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x1f00000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x4980000        - LEN: 0x600000       
 Start processing LOGO ......
 Start processing EBR2
 Reading:  BEGIN: 0x5300000        - LEN: 0x200           
 Start processing system
 Reading:  BEGIN: 0x5d80000        - LEN: 0x38400000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6582_EMMC_iDROID_TANGO A5_4_4_2_ALPS_KK1_MP1_V2_10(2018_10_08_17_25)
 Wait untill phone will start charging.
 All done.

maanarman · Oct 9, 2018

Gfive Smart 2 Write Flash Done

Code:

 Flash files count is :6
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM140)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 90014A483447326111 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM203)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Oct 9, 2018

Qmobile X30 Write FF Done

Code:

 Flash files count is :12
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 90014A483447326111 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Oct 9, 2018

Logs

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+8192Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 86:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe7000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe7600000       [3.615 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 -Reading GPT Drive OK
 Build ID: LMY47I
 Display ID: C5P_80L_WE_3GW_B15_EMMC_32_8_DDR2_QHD_DCHS_356_D2Q_mione_R5_20171214-171824
 Version: 6.0
 Build Date: Thu Dec 14 17:18:24 CST 2017
 Model: mione R5
 Brand: mione R5
 Device: mione R5
 Manufacturer: mione R5
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_YUANDA6580.WE.L
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 352759082303657
 IMEI[2] from NVRAM: 352759082303665
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_mione R5_mione R5_6_0_ALPS_L1_MP6_V2_YUANDA6580_WE_L(2018_10_07_17_38)
 Wait untill phone will start charging.
 All done.

Code:

maanarman · Oct 10, 2018

Oale X2 Write FF Done

Code:

 Flash files count is :11
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM70)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM17)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Oct 11, 2018

Oale X1 Read FF Done

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 -Reading GPT Drive OK
 Build ID: LMY47I
 Display ID: Z6U190HF_YT_V006En
 Version: 5.1
 Build Date: Wed Jul 19 11:37:34 CST 2017
 Model: gxq6580_weg_l
 Brand: alps
 Device: gxq6580_weg_l
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 354741098856108
 IMEI[2] from NVRAM: 354741098856116
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_10_10_21_13)
 Wait untill phone will start charging.
 All done.

Post here successfully Unlocked / Repaired / Flashed operations via NCK BOX/Dongle Premium v2

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview