Z3X Post here successfully Unlocked / Repaired / Flashed Phones with Pandora's 2021

Z3X Team

GsmToto

Super Moderator
Jan 1, 2021
3,561
18,043
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Motorola XT2016-1 (Motorola One Macro)
Operation: Erase FRP
Software version: 5.0

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0788
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6771]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM11 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0788
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6771]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x90555C7F, 0xE70D385B, 0x1C2BFB29, 0x8AEF1C1D
Get Chip ID... [MT6771]
Get SOC ID... [33F1EE2A46C5BEBD852D5AB3D51722C6B544C1658D5306BACF 8A8B8BE3540EE7]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [9]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A68433861503E032303AC4D96F1
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hC8aP>
EMMC_ID : 0x90014A68433861503E032303AC4D96F1
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x0000039000 (228.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : motorola
Product Manufacturer : motorola
Product Model : motorola one macro
Product Name : lima_retail
Product Device : lima
Product Board : lima
Board Platform : MT6771
Build ID : PMDS29.70-81-5
Build Date : Thu Jun 25 08:49:10 CDT 2020
Security Patch : 2020-07-01
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : 9047c
Userdata FS Type : F2FS
Read partitions info from phone... OK
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Motorola_XT2016-1%20(Motorola%20One%20Macro)/FRP_BACKUP_(2023-5-11_11-1-44)/"directory
Writting FRP data... OK
Erase FRP done!
 
  • Like
Reactions: SPYROS and tools7

GsmToto

Super Moderator
Jan 1, 2021
3,561
18,043
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Motorola XT2128-1 (Motorola Moto G20)
Operation: Erase FRP
Software version: 5.0
Work ID: 2320842

Waiting for device... OK
Device found at COM38
Port: USB\VID_1782&PID_4D00\5&30CD2A0&0&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Connecting to device... OK
Selected processor: Tiger_T700_64
Load files... OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: ZY32C8LQ75
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : motorola
Product Manufacturer : motorola
Product Model : moto g(20)
Product Name : java_retail
Product Device : java
Product Board : p352
Board Platform : ums512
Build ID : RTAS31.68-66-3
Build Date : Tue Feb 21 13:40:32 CST 2023
Display ID : RTAS31.68-66-3
Security Patch : 2023-03-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 66-3
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!
 
  • Like
Reactions: SPYROS and tools7

GsmToto

Super Moderator
Jan 1, 2021
3,561
18,043
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Itel A551L (Itel A27)
Operation: Erase FRP
Software version: 5.0

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Waiting for device... OK
Device found at COM12
Port: USB\VID_1782&PID_4D00\5&E901492&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Connecting to device... OK
Selected processor: SC9832E
Load files... OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 080003121N022
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Itel
Product Manufacturer : ITEL MOBILE LIMITED
Product Model : itel A551L
Product Name : SU360O
Product Device : itel-A551L-Pro
Product Board : A551L
Board Platform : sp9832e
Build ID : RP1A.201005.001
Build Date : Wed Feb 15 18:55:13 CST 2023
Display ID : A551L-Pro-SU360O-11.0-OP-V028-20
Security Patch : 2023-02-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : OP-V028-20230215
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!
 
  • Like
Reactions: tools7 and SPYROS
Australian single sim OPPO A16s network unlock error

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM6 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x8AF218F3, 0x4E7EE851, 0xC96058AE, 0xE675653F
Get Chip ID... [MT6765]
Get SOC ID... [C7A81304222E8CC438BAA837CF2FD097C52D9A977391D00CE2FC8CD44925C19C]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A68433861503E031012E05E9803
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hC8aP>
EMMC_ID : 0x90014A68433861503E031012E05E9803
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : alps
Product Manufacturer : alps
Product Model : oplus_mssi_64_cn
Product Name : sys_oplus_mssi_64_cn
Product Device : oplus_mssi_64_cn
Product Board : oppo6765
Board Platform : MT6765
Build ID : RP1A.200720.011
Build Date : Fri Jul 23 03:33:33 CST 2021
Display ID : RP1A.200720.011 release-keys
Security Patch : 2021-08-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 1626981447835
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security files... OK
Read security files... OK
Read lock info... error(1)

Selected model: OPPO CPH2271 (OPPO A16s)
Operation: Unlock network
Software version: 5.0
 
  • Like
Reactions: GsmToto

adnan_sabir831

Active Member
Feb 28, 2017
43
8
Peshawar Pakistan
Itel A661L (A49) Done

Selected model: Itel A661L (Itel A49)
Operation: Erase FRP And Wipe
Software version: 5.4
Work ID: 4846772

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM18
Port: USB\VID_1782&PID_4D00\6&236CC9F3&0&1
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9832E
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 076574025Y003370
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Itel
Product Manufacturer : itel
Product Model : itel A661L
Product Name : A661L
Product Device : itel-A661L
Product Board : A661L
Board Platform : sp9832e
Build ID : RP1A.201005.001
Build Date : Tue Aug 2 18:50:18 WIB 2022
Display ID : A661L-V490AE-11.0-OP-V022-202208
Security Patch : 2022-07-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : OP-V022-20220802
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!
 
  • Like
Reactions: GsmToto

hermann07

Active Member
Jul 19, 2017
32
24
ABIDJAN
Skype
hermann0990
Sonork ID
100.1650096
Samsung A042F READ INFO ERROR PLEASE FIX IT
Get device info... OK
EMMC_ID: 0x150100345836324D4200F6E1E4C8B9B7
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: 4X62MB
EMMC_ID : 0x150100345836324D4200F6E1E4C8B9B7
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x0747C00000 (29,12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x00C0000000 (3,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [F2FS] ...
Exception: No mapping for the Unicode character exists in the target multi-byte code page
 
  • Like
Reactions: GsmToto
Top