Infinity Preloader to brom mode

[Gsm_Master]

Hello
I cant enter to brom mode.The port is detected mediatek preloader.
How to enter to brom mode?
Phone model is infinix x665b.Need to remove frp.

Here is log

gui: Default
S/N: 47198877 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.37
Load IDBase v723487 Ok

Update configuration...
Configuration [12060] updated

Load IDBase v723487 Ok
Operation : Identify Device [ v2.37 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
[+] SecureData Backup
[+] AutoBoot
[+] Read Deep Info: PRL, HW, DEBUG
[+] FireFly : AutoEMI
[+] FireFly : FireFly UNI-Proto
[+] Smart Service
[-] Local SLA
[-] Force BROM
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM4)
MODE: PRELOADER PORT
PORT: 4
Waiting BOOT ack...
PRELOADER: ACK confirm FAIL
BROM: Init BROM
BROM init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]

BROM: SecLevel: 0x00000005
BROM: SecMode : SBC+SDA
BROM: BROM|BL : 0xFF|0x03
BROM: PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...
BROM : Reset Interface
PTFN: MediaTek PreLoader USB VCOM (Android) (COM4)
MODE: PRELOADER PORT
PORT: 4
Waiting BOOT ack...
PRELOADER: ACK confirmed
BROM: Init BROM
BROM init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]

BROM: SecLevel: 0x00000005
BROM: SecMode : SBC+SDA
BROM: BROM|BL : 0xFF|0x03
BROM: PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...

BROM : 0x00007024 : DA SEND ERROR
ERROR : SECURE BOOT : SELECTED DA NOT SUPPORTED IN CURRENT DEVICE STATE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC
Retrieve device config...

1. What to do [MTK sec 2022] models that can not boot - GSM-Forum
2. Try loaders:
1. 0_base/BASE_v2112/MTK_AllInOne_DA.bin

Ok

Error : Fail to init protocol
>>> Remove battery and cable. Check cable/connection/drivers and repeat operation!

Reconnect Power/Cable now

 

[Infinity-Box]

Hi,
It may be you should use test-point.
See #CM2MT2 boot issues manual [MTK sec 2022] models that can not boot - GSM-Forum

 

[Gsm_Master]

Hi,
It may be you should use test-point.
See #CM2MT2 boot issues manual [MTK sec 2022] models that can not boot - GSM-Forum

No tp for this model

 

[Infinity-Box]

No tp for this model

Are you sure?

 

[Gsm_Master]

Are you sure?

Yes i searched everywhere.But no test point.Phone model is infinix x665b.

 

[Najmul007]

Yes i searched everywhere.But no test point.Phone model is infinix x665b.

i have test point

 

[Gsm_Master]

i have test point

Would be great,if you ll help

 

[combin]

Are you sure?

i post infinix hot11s x6812 test point world first

 

[Zaheero]

Hi,
It may be you should use test-point.
See #CM2MT2 boot issues manual [MTK sec 2022] models that can not boot - GSM-Forum

Sir One of my Friend Installed Flexihub On my PC for Unlocking a Samsung FRP Remotely. I don't know that it will happen a problem with my CM2 Dongle.

this error showDongle misconfiguration. Contact to support!

So, I am telling very Sorry Sir.
I will never use this kind of software. Please Help me to Solve my issue this time. Thanks in Advance.
Serial no CF728D56

 

[Zaheero]

Sir One of my Friend Installed Flexihub On my PC for Unlocking a Samsung FRP Remotely. I don't know that it will happen a problem with my CM2 Dongle.

this error showDongle misconfiguration. Contact to support!

So, I am telling very Sorry Sir.
I will never use this kind of software. Please Help me to Solve my issue this time. Thanks in Advance.
Serial no CF728D56

 

[Infinity-Box]

Sir One of my Friend Installed Flexihub On my PC for Unlocking a Samsung FRP Remotely. I don't know that it will happen a problem with my CM2 Dongle.

this error showDongle misconfiguration. Contact to support!

So, I am telling very Sorry Sir.
I will never use this kind of software. Please Help me to Solve my issue this time. Thanks in Advance.
Serial no CF728D56

very nice story

Your dongle was damaged with sharing tool.

Now use FREE repair How to repair dongle after network sharing - FREE - Infinity Box Dongle [CM2] [BEST] Support