Realme 2 RMX1805 Dead Boot And Bad Health Repair With Medusa Pro
This Is Bad Health Report
First BackUp Your Security Partition Like :
FSC_PhysPart
FSG_PhysPart
Modem_PahysPart0
Modemst1_PhysPart0
Modemst2_PhysPart0
Oem_PhysPart0
Realme 2 RMX1805 100% Tested Dump File
Download
Tested Full Firmware
DownloadSpecial Thanks To Medusa Pro Team..And For Dump File
This Is Bad Health Report
Code:
Model Settings:[/CENTER]
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC HAG4a2
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A484147346132A5C75A3A6226E1
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG4a2
Product revision : 10.5
Product serial number : (hex) C75A3A62
Manufacturing date : 02/2019
---------------------------------------------------------------
CSD Info
CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x1
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/HAG4a2_17_12_2022_11_47_52.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.7; FW: 1.24.
Samsung eMMC only supports smart report operation!
DEVICE_LIFE_TIME_EST_TYP_B : Exceeded its maximum estimated device life time
DEVICE_LIFE_TIME_EST_TYP_A : 0% - 10% device life time used
PRE_EOL_INFO : Normal
SW: 2.2.4.7; FW: 1.24.
Remove write protect successfully completed.
Disconnected.--------------------------------------------------------------------------------------------------------------------------------------------------------------
This Is good Work Report
This Is good Work Report
Code:
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC HAG4a2
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A484147346132A5C75A3A6226E1
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG4a2
Product revision : 10.5
Product serial number : (hex) C75A3A62
Manufacturing date : 02/2019
---------------------------------------------------------------
CSD Info
CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x1
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/HAG4a2_18_12_2022_11_20_16.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.7; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00000C00) 1536 KB
P04: modemst2 (0000AC28, 00000C00) 1536 KB
P05: persist (0000B828, 00010000) 32 MB
P06: opporeserve1 (0001B828, 00004000) 8 MB
P07: opporeserve2 (0001F828, 00020000) 64 MB
P08: fsc (0003F828, 00000002) 1024 b
P09: ssd (0003F830, 00000010) 8 KB
P10: sbl1 (0003F840, 00000400) 512 KB
P11: rpm (0003FC40, 00000400) 512 KB
P12: tz (00040040, 00001000) 2048 KB
P13: devcfg (00041040, 00000200) 256 KB
P14: sbl1bak (00041240, 00000400) 512 KB
P15: rpmbak (00041640, 00000400) 512 KB
P16: tzbak (00041A40, 00001000) 2048 KB
P17: devcfgbak (00042A40, 00000200) 256 KB
P18: dsp (00042C40, 00008000) 16 MB
P19: DDR (0004C000, 00000040) 32 KB
P20: fsg (0004C040, 00002000) 4 MB
P21: sec (0004E040, 00000020) 16 KB
P22: aboot (0004E060, 00000800) 1024 KB
P23: abootbak (0004E860, 00000800) 1024 KB
P24: modem (0004F060, 00040000) 128 MB
P25: dtbo (0008F060, 00004000) 8 MB
P26: vbmeta (00093060, 00000080) 64 KB
P27: boot (000930E0, 00020000) 64 MB
P28: recovery (000B30E0, 00020000) 64 MB
P29: devinfo (000D30E0, 00000800) 1024 KB
P30: splash (000D4000, 00005800) 11 MB
P31: LOGO (000D9800, 00010000) 32 MB
P32: DRIVER (000E9800, 00010000) 32 MB
P33: cache (000F9800, 00080000) 256 MB
P34: misc (00179800, 00000800) 1024 KB
P35: keystore (0017A000, 00000400) 512 KB
P36: config (0017A400, 00000040) 32 KB
P37: log (0017A440, 00020000) 64 MB
P38: oem (0019A440, 00000800) 1024 KB
P39: limits (0019C000, 00000040) 32 KB
P40: mota (001A0000, 00000400) 512 KB
P41: dip (001A0400, 00000800) 1024 KB
P42: mdtp (001A0C00, 00010000) 32 MB
P43: syscfg (001B0C00, 00000400) 512 KB
P44: mcfg (001B1000, 00002000) 4 MB
P45: lksecapp (001B4000, 00000100) 128 KB
P46: cmnlib (001B4100, 00000800) 1024 KB
P47: cmnlib64 (001B4900, 00000800) 1024 KB
P48: keymaster (001B5100, 00000800) 1024 KB
P49: lksecappbak (001B5900, 00000100) 128 KB
P50: cmnlibbak (001B5A00, 00000800) 1024 KB
P51: cmnlib64bak (001B6200, 00000800) 1024 KB
P52: keymasterbak (001B6A00, 00000800) 1024 KB
P53: apdp (001B8000, 00000200) 256 KB
P54: msadp (001B8200, 00000200) 256 KB
P55: dpo (001B8400, 00000010) 8 KB
P56: logdump (001B8410, 00020000) 64 MB
P57: vm-kystore (001D8410, 00000800) 1024 KB
P58: vm-data (001D8C10, 00005000) 10 MB
P59: hyp (001E0000, 00004000) 8 MB
P60: vm-system (001E4000, 00020000) 64 MB
P61: vm-linux (00204000, 00010000) 32 MB
P62: system (00214000, 006B4800) 3433 MB
P63: vendor (008C8800, 0020FB00) 1055 MB
P64: userdata (00ADC000, 0699FFDF) 52.81 GB
Backuping modemst1 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/HAG4a2_modemst1_0xa028_0xc00_18_12_2022_11_20_16.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.4.7; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/HAG4a2_modemst2_0xac28_0xc00_18_12_2022_11_20_16.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.4.7; FW: 1.24.
Backuping fsg partition...
Opening C:/Program Files/Medusa Pro Software/Backups/HAG4a2_fsg_0x4c040_0x2000_18_12_2022_11_20_16.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.2.4.7; FW: 1.24.
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 2179072
Number of sectors : 7030784
Device Manufacturer : OPPO
Build ID : PKQ1.190319.001
Release ID : 9
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : S88051AA1-user 9 PKQ1.190319.001 eng.root.20201120.092029 release-keys
---------------------------------------------------------------
Samsung eMMC only supports smart report operation!
DEVICE_LIFE_TIME_EST_TYP_B : 0% - 10% device life time used
DEVICE_LIFE_TIME_EST_TYP_A : 0% - 10% device life time used
PRE_EOL_INFO : Normal
SW: 2.2.4.7; FW: 1.24.
Selected file: C:/Users/Bacha Irfan/Desktop/RMX1805EX_11_A.70_200914_568ab934/RMX1805EX_11_A.70_200914_568ab934/RMX1805EX_11_A.70_200914_568ab934/New folder/rawprogram0.xml
Selected file: C:/Users/Bacha Irfan/Desktop/RMX1805EX_11_A.70_200914_568ab934/RMX1805EX_11_A.70_200914_568ab934/RMX1805EX_11_A.70_200914_568ab934/New folder/patch0.xml.
Selected rawprogram XML file: C:/Users/Bacha Irfan/Desktop/RMX1805EX_11_A.70_200914_568ab934/RMX1805EX_11_A.70_200914_568ab934/RMX1805EX_11_A.70_200914_568ab934/New folder/rawprogram0.xml.
Switched to user area.
Backuping. Please wait...
Reading partition modemst1... Done.
Reading partition modemst2... Done.
Backuping finished.
Writing. Please wait...
Write data verification is enabled.
Writing partition oppodycnvbk... Done.
Writing partition oppostanvbk... Done.
Writing partition persist... Done.
Writing partition opporeserve1... Done.
Writing partition opporeserve2... Done.
Writing partition sbl1... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition devcfg... Done.
Writing partition sbl1bak... Done.
Writing partition rpmbak... Done.
Writing partition tzbak... Done.
Writing partition devcfgbak... Done.
Writing partition dsp... Done.
File C:/Users/Bacha Irfan/Desktop/RMX1805EX_11_A.70_200914_568ab934/RMX1805EX_11_A.70_200914_568ab934/RMX1805EX_11_A.70_200914_568ab934/New folder/sec.dat open failed.
Writing partition aboot... Done.
Writing partition abootbak... Done.
Writing partition modem... Done.
Writing partition dtbo... Done.
Writing partition vbmeta... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition LOGO... Done.
Writing partition DRIVER... Done.
Writing partition cache... Done.
Writing partition mdtp... Done.
Writing partition lksecapp... Done.
Writing partition cmnlib... Done.
Writing partition cmnlib64... Done.
Writing partition keymaster... Done.
Writing partition lksecappbak... Done.
Writing partition cmnlibbak... Done.
Writing partition cmnlib64bak... Done.
Writing partition keymasterbak... Done.
Writing partition apdp... Done.
Writing partition system... Done.
Writing partition vendor... Done.
Writing partition userdata... Done.
Switched to user area.
Writing MBR...Done.
Writing primary GPT...Done.
Writing partition BackupGPT... Done.
Writing finished.
SW: 2.2.4.7; FW: 1.24.
Disconnected.
First BackUp Your Security Partition Like :
FSC_PhysPart
FSG_PhysPart
Modem_PahysPart0
Modemst1_PhysPart0
Modemst2_PhysPart0
Oem_PhysPart0
Realme 2 RMX1805 100% Tested Dump File
Download
Tested Full Firmware
Download
