- Jun 10, 2019
- 1,319
- 901
Redmi 10c (Fog) Hang on Logo Fix Using Fastboot Mode
Is your Redmi 10c stuck on the logo screen, refusing to boot up? Don't worry, we've got you covered. This guide will walk you through the steps to resolve the hang on logo issue using fastboot mode and a small file we've shared. Please note that in some cases, unlocking the bootloader may be necessary. The file provided allows you to flash or rewrite the boot partition, facilitating an easy repair process for your Redmi 10c. Follow these steps carefully, and make sure to use the recommended Mi Flash Tool for a seamless experience.
Step 1: Download Necessary Files
Ensure you have the required files downloaded before proceeding. This includes the small file provided for fixing the hang on logo issue and the Mi Flash Tool.
Link:- Redmi 10C (fog) FIX Hang Fastboot Mode
Step 2: Unlock Bootloader (If Required)
If your device's bootloader is locked, you may need to unlock it before proceeding with the fix. Follow the official Xiaomi bootloader unlocking procedure, which typically involves obtaining an unlock code and using Mi Unlock Tool.
Step 3: Boot into Fastboot Mode
Power off your Redmi 10c completely. Press and hold the volume down button and the power button simultaneously until the fastboot logo appears on the screen.
Step 4: Connect Your Device to PC
Connect your Redmi 10c to your PC using a USB cable while in fastboot mode.
Step 5: Use Mi Flash Tool
Launch the Mi Flash Tool on your PC. Select the appropriate ROM folder and ensure that your device is recognized by the tool.
Step 6: Flash or Rewrite Boot Partition
Locate the small file you downloaded for fixing the hang on logo issue. This file is designed to flash or rewrite the boot partition. Follow the on-screen instructions in Mi Flash Tool to initiate the process.
Step 7: Wait for Completion
Allow the flashing process to complete. Do not disconnect your device during this time. Once finished, your Redmi 10c should automatically reboot.
Step 8: Verify Fix
After the reboot, check if the hang on logo issue is resolved. Your Redmi 10c should now boot up without any problems.
By following these steps and using the recommended Mi Flash Tool, you can easily fix the hang on logo issue on your Redmi 10c (Fog). Always exercise caution when flashing files and ensure compatibility with your device model.
If you find my post helpful, press like button✌