Redmi 6A FRP Lock Remove with Hydra Tool
Code:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Service Function
Factory Reset Protection[FRP]
Auto
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Searching for MTK Device...Found
MTK Port Type : Flashmode BROM
FriendlyName : MTK USB Port (COM10)
Device : /5&30124de0&0&1
SymbolicName : \\?\usb#vid_0e8d&pid_0003#5&30124de0&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver : 02/07/2018,2.0.0.6 ;DriverVer=mm/dd/yyyy,w.x.y.z
Service : usbser
Openning Port [COM10] Ok
Handshaking...Ok
HwCode : 0766 {MT6765/MT8768t}
Hwver : 0000
Target config : E7
SBC : 01 (True)
SLA : 02 (True)
DAA : 04 (True)
SWJTAG : 06 (True)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 20 (True)
MEMWRITE : 40 (True)
CMD_C8 : 80 (True)
Connection : BROM
HW Subcode : 8A00
HW Subcode : CA00
SW Ver : 0000
ME_ID : F84D130CA8CFF97C93CF68279978A48A
SOC_ID : 279A9057E7A1F27F17027AC4FE090B2E00DEC7F8EA9EB0074C734C90B9ADCCC4
Exploiting Device...
Successfully Exploited..
Handshaking...Ok
Dumping Preloader from Bootrom..
Seeking preloader address..Found @ 0x00200BC4
Starting to dump...
Prel Size : 0x000363E4
Successfully dump preloader.. [C:\Hydra Tool\Boot\PreloaderDump\preloader_cactus.bin]
Target config : 00
SBC : 00 (False)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
Connection : BROM
Preparing Download Agent..[MTK_AllInOne_DA_5.2152.bin]
Patching da2 ... Ok
Uploading Stage 1....
Successfully uploaded stage 1, jumping ..
Executing JUMP_DA Address @ 0x00200000
Jumping to 0x00200000 Ok 0xC0
Successfully received DA sync
ONNECTION_AGENT : brom
DRAM config needed for : 90014A4841473461
Sending auto preloader from dump... [preloader_cactus.bin]
Sending emi data.. [DRAM setup passed.]
Sending emi data succeeded.
Uploading stage 2...
Upload data was accepted. Jumping to stage 2...
Successfully uploaded stage 2
ERAM Size : 0x000000000003A000-232 KB
IRAM Size : 0x0000000080000000-2 GB
EMMC Boot1 Size : 0x0000000000400000-4 MB
EMMC Boot2 Size : 0x0000000000400000-4 MB
EMMC RPMB Size : 0x0000000000400000-4 MB
EMMC USER Size : 0x00000003AB400000-14,676 GB
EMMC CID : 90014A484147346132A533DABD8CB5E5 - HAG4a2
HW-CODE : 0x766
HWSUB-CODE : 0x8A00
HW-VERSION : 0xCA00
SW-VERSION : 0x0
CHIP-EVOLUTION : 0x0
DA-VERSION : 1.0
Speed : high-speed
Upload data was accepted. Jumping to stage 2...
DA Extensions successfully added
Reading Partition Table ..
Partition Count : 43
--------------- Reading build.prop content ---------------
Brand : xiaomi
Model : Redmi 6A
Product : cactus
ID : O11019
SDK : 27
Release : 8.1.0
ABI : armeabi-v7a
CPU abilist : armeabi-v7a,armeabi
Locale : en-GB
Description : cactus-user 8.1.0 O11019 V9.6.18.0.OCBMIFD release-keys
Miui Ver : V9
Device : cactus
Display ID : O11019
Security Patch : 2018-08-01
Fingerprint : xiaomi/cactus/cactus:8.1.0/O11019/V9.6.18.0.OCBMIFD:user/release-keys
StorageType : mtp
--------------- end of build.prop content ---------------
Reading IMEI........
IMEI1 : 86843**********
IMEI2 : 86843**********
-------------------------------
Bootloader Status...
Bootloader : Unlocked
-------------------------------
Backing up Security..
- preloader(preloader.bin), 512 KB = Ok [preloader_cactus.bin]
*Creating Scatter file... C:\Hydra Tool\Backup\MTKBKUP\0766_F84D130CA8CFF97C93CF68279978A48A\Auto\072923104805\6765_Android_scatter.txt
- pgpt(pgpt.bin), 32 KB = Ok
- nvram(nvram.bin), 64 MB = Ok
- nvdata(nvdata.bin), 64 MB = Ok
- frp(frp.bin), 1024 KB = Ok
- protect1(protect1.bin), 8 MB = Ok
- protect2(protect2.bin), 9,469 MB = Ok
- persist(persist.bin), 64 MB = Ok
- proinfo(proinfo.bin), 3 MB = Ok
- nvcfg(nvcfg.bin), 32 MB = Ok
- sec1(sec1.bin), 2 MB = Ok
- seccfg(seccfg.bin), 8 MB = Ok
- lk(lk.bin), 1024 KB = Ok
Backup Done!!!
Rebooting Device...
Reboot Option : RebootToNormal
Rebooting Operation Done!!!!
Action Result : Ok
Elapsed Time : 00:00:57