- Jun 10, 2019
- 1,324
- 906
Redmi A1/A1 Plus FRP and Mi Account Bypass - A Step by Step Guide
Requirements
Before you start the bypass process, make sure you have the following:- Redmi A1 or A1 Plus smartphone.
- A computer with the necessary drivers and software installed.
- SP Flash tool.
- MediaTek USB drivers.
- DA File for your device.
- Scatter File for your device.
- Account bypass file.
Begin by downloading and extracting the following files to your computer:
- SP Flash tool
- Mediatek USB Driver
- Account bypass file
- DA File for your device
- Scatter File for your device
Install the MediaTek USB driver on your computer. This is essential to ensure that your computer can communicate with your Redmi A1/A1 Plus.
Step 3: Disable DAA and SLA Authentication
Using a tool like rom2box, disable DAA (Download Agent Authentication) and SLA (Secure Boot Authentication). [Link Tool is below in download sections]
Step 4: Run SP Flash Tool
Launch the SP Flash Tool on your computer.
Step 5: Set Up Connection
In SP Flash Tool, go to the 'Options' menu and select 'Connection.' Configure the connection settings as per the image provided in the guide.
Step 6: Select Download Agent and Scatter File
- Click on 'Download Agent' and locate the DA File from your account remove the file.
- Click on 'Choose Scatter File' to locate the Scatter File from your account and remove the file. This will automatically load the required files.
Turn off your Redmi A1/A1 Plus. Connect the device to your computer while pressing both the volume up and down keys simultaneously.
Step 8: Format Flash
In SP Flash Tool, select the 'Format' menu and choose 'Manual Format Flash.'
Input the addresses according to your needs:
- MI Account Lock: 0x2f800000 to 0x3000000
- FRP (Google Account) Lock: 0x24408000 to 0x100000
- Userdata (Reset) Lock: 0x134000000 to 0xc0000000
Once you've configured the addresses, click on 'START' to begin the process.
Step 10: Complete the Download
After the formatting process is complete, go back to the 'Download' tab in SP Flash Tool. Select 'Download Only' from the drop-down menu and click 'Download.' You will see a yellow progress bar indicating the process.
Step 11: Disconnect and Switch On
Once the process is finished, disconnect your device from the computer and switch it on. Your Redmi A1/A1 Plus should now be free from the Mi account and Google FRP locks.
Download Link:
- Download - Redmi A1/A1 Plus FRP and Mi Account Bypass File || Auth Bypass Tool || MTK Drivers || SP Flash Tool ||
If you find my post helpful, press like button✌
